Help with Voltage Regulator Confusion-GT235
I have a question re: the proper voltages to read from a 5 wire regulator. (Would appreciate a wiring diagram for a GT235 with a 5 wire regulator. (Briggs Model ENGINE MARKED 350777-1154-E1)
Problem: Fails to charge. (Charge light ON)
I am receiving 28VAC from the stator/alternator (2 yellow wires), and I believe that is good.
Normally, with a 3 wire regulator, I know I just check the "center" wire output for 13.6 volts. Unfortunately...This motor comes with a A 5 wire regulator.
Would appreciate someone telling me what the three inner wires coming from the regulator are supposed to indicate on the voltmeter, and what their purpose is. (The outer yellow wires have the 28VAC I mentioned)....
I would love to have a wiring diagram, schematic for this lawn tractor, should someone have access to one- please share it with me. (help!)
I've ordered a service manual, but it won't arrive for a few days, and I'm anxious to get this tractor working properly.