08-01-2012, 10:04 PM
John Deere 425 Tail lights
I understand there is a Kit to keep the tail lights on the 425 from falling out. Two metal straps that bolt to the tail light housing and the fender. My dealer can't find a part number for the kit. My question is, does anyone know the part number for this kit?
Thanks in advance for your help.
08-01-2012 10:04 PM
08-01-2012, 11:37 PM
Scott: If my memory serves me, this is not a JD part. I've seen them on Ebay, I think. You might try there. Gary
08-02-2012, 06:49 AM
The taillights were always loose on my 445 so I finally simply set them in with Gorrila Glue prior to putting it up for sale. That worked great ... as far as I know.
"Good advice often goes unrecognized until it's too late."
1026R tractor, H120 loader, 60D mid-mount mower, JDiMatch, RB2060L rear blade with hydraulic angling, JD ballast box, 40" hydraulic core aerator, 38" dethatcher, home-made duo screen and several JD hats.
08-02-2012, 07:24 AM
I used some clear silicon on my 445 tails. Kept them in place for years.
08-02-2012, 05:59 PM
Thanks for all your ideas. I found the ebay sight with the retainer straps. Studied them for a few minutes and went out and fabricated straps in about 30 minutes. Will definitely solve the problem!! Now I'm going to fabricate a rear bumper that will attach to the wait box holes and maybe prevent anyone from backing into something by mistake. I'll use lynch pins for quick disconnect and summer use.
Thanks again guys,
08-07-2012, 01:49 PM
Originally Posted by Brian
I did the same, and it holds well. If / when it lets go, I'll do it again!
Mowin' till it's Snowin'!
Former member of "The Ready First Combat Team" The Rock 3AD, Germany