Anybody have a JD1120 and can tell me or provide pictures of the pull arms attachment at the load shaft? My dad has had this JD110 mannheim made tractor for approx 12 years. It's great runner only problems he had was the front right tire always leaking and the injector pump was reworked due to fuel leaking.
This tractor always made a clunkly sound when using the rotary cutter and I finally figured it out. The right pull arm socket at the tractor side has completely worn out. Now the arms on this tractor are one piece arms and I'm not sure what really suppose to be sandwich between the diff and the pullarms.
I read elsewhere a washer and shim where suppose to be use to soak up any slack but I can't find the part numbers for this. The arms at the implement side are cat2 and we use the bushing but I'm not 100% sure if the arms at the tractor side are suppose to be cat1 or 2 and if a bushing suppose to be use. I'm also trying to track down the correct JD part for the shaft collars and pins.
Anybody who can help would be greatly appreciated. Can anybody help me?
correct pullarm part#s LH and RH sides
collar part number
pins part numbers
and does washer and or shims suppose to be use, and if yes, what part#?
The JD pkg has instructions and state the washer suppose to be on transmission side of the draft arms. Either way the parts came in and I shimmed them up with the 2 enclosed washers.
Everything looks much better, the half-a$$ job that was done in the pass is now corrected. If you need a user tractor parts supplier in TX , I can endorse Wellington Tractors they had more inventory than my local BM tractor. Wellington Tractors are up near Wellington TX.