Help-Smart tv problems!
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 31
Like Tree69Likes

Thread: Help-Smart tv problems!

  1. Top | #1
    BigJim55's Avatar
    Join Date
    Nov 2013
    Last Online
    Yesterday @ 01:30 PM
    Location
    Schellsburg, PA
    Posts
    11,138
    Thanks
    3,002
    Thanked 1,381 Times in 1,084 Posts

    Help-Smart tv problems!

    ugh- something is wrong with my smart tv. the wife took and just shut the tv remote off while i was watching Amazon prime tv. all the parts of the smart tv is working. but for some reason, we cannot get just the part of the tv to work again. it keep's bringing up that the tv needs to reload the dish stuff. after just a few minutes it wants u to unplug ur reciever, we have done that numerous times so far-nothing.

    can any one help me on this?? our other tv's in the house work, it is just this tv for some reason. thanks big jim
    jim

    2006 2520 mcut, 2004 x475, 1953 model 50, 1985 318-was my Dad's,
    king kutter tiller-60", frontier-stone rake, jd-4ft brush hog, frontier-6ft back-blade, frontier-forks, 48 inch forks,
    2-54inch jd snow plows, jd-5ft-pull brush hog,

    2018 835R gas model gator-"aka" the Cadillac i say!! 6ft jd snow plow-which already has a dtac out on it. i got just about everything on it i could at the time

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    ddinham's Avatar
    Join Date
    May 2013
    Last Online
    Yesterday @ 11:01 PM
    Location
    Eastern Kansas
    Posts
    3,549
    Thanks
    167
    Thanked 493 Times in 376 Posts
    Sounds like the problem is not with the TV, but with the Dish receiver. If it does not straighten out by tomorrow, you will need to call Dish. You might need a new receiver. I have DirecTV, but rarely watch TV.

    Dave
    pcabe5 and BigJim55 like this.
    JD 4066R CAB
    JD H180 FEL with SSQA brackets, JD iMatch, JD Ballast Box & ext, JD pull behind seed spreader
    Frontier RB2196H 8 ft rear blade/hyd angle, Frontier BB1065 Box Blade, Befco 3pt 110 inch RFM
    48" pallet forks, KK 3pt Boom Pole, Northern Tool 3pt middle buster, 2 bottom Dearborn plow
    County Line post hole digger, Rhino 3pt 10ft brush hog, Land Pride 8ft rock rake
    Fit Rite Hydraulics 3pt Top Link, front 3pt adapter for SSQA, 7 1/2 ft Field Roller, 8ft Dearborn tandem disk

  4. Top | #3
    BigJim55's Avatar
    Join Date
    Nov 2013
    Last Online
    Yesterday @ 01:30 PM
    Location
    Schellsburg, PA
    Posts
    11,138
    Thanks
    3,002
    Thanked 1,381 Times in 1,084 Posts
    Quote Originally Posted by ddinham View Post
    Sounds like the problem is not with the TV, but with the Dish receiver. If it does not straighten out by tomorrow, you will need to call Dish. You might need a new receiver. I have DirecTV, but rarely watch TV.

    Dave
    yeah-i agree it's with the receiver part, just because of how the wife shut things down, is causing this, and for some stupid reason, we can't figure out how to reset it. but thanks for responding-
    pcabe5 likes this.
    jim

    2006 2520 mcut, 2004 x475, 1953 model 50, 1985 318-was my Dad's,
    king kutter tiller-60", frontier-stone rake, jd-4ft brush hog, frontier-6ft back-blade, frontier-forks, 48 inch forks,
    2-54inch jd snow plows, jd-5ft-pull brush hog,

    2018 835R gas model gator-"aka" the Cadillac i say!! 6ft jd snow plow-which already has a dtac out on it. i got just about everything on it i could at the time

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Jan 2012
    Last Online
    Yesterday @ 06:39 PM
    Location
    East Central Indiana
    Posts
    1,470
    Thanks
    93
    Thanked 240 Times in 172 Posts
    Unplug the dish receiver & also unplug the TV. then plug them both in. Then turn them both on manually with the power button on each.
    pcabe5, OxPath and BigJim55 like this.
    Kioti CK3510SE HST, Kioti KL4030 Loader, John Deere 655 Tiller, Frontier LR2072 Landscape Rake, Virnig V50 Pallet Forks, Woods GB60 Box Blade
    John Deere X739 AWS 4X4, 60HC Auto Connect Deck, Front grader blade.
    John Deere 825i Gator

    John Deere Tractors I have owned in the past.
    425 AWS, 455, 4400, 2210, 4710, 2320, 2720, X475, 1026R, 4120, 2025R

  7. Top | #5

    Join Date
    Sep 2011
    Last Online
    @
    Location
    Central CT
    Posts
    2,334
    Thanks
    6
    Thanked 220 Times in 174 Posts
    Quote Originally Posted by ChrisR View Post
    Unplug the dish receiver & also unplug the TV. then plug them both in. Then turn them both on manually with the power button on each.
    You could start with just the Dish receiver and then move on to doing both if that doesn't correct the issue. For the TV, leave it unplugged for about 10-15 minutes if you do end up unplugging it since many TV's don't have a "reset" button and you need to let the TV 'reset' by not having power.
    pcabe5, OxPath, BigJim55 and 1 others like this.
    ---

    2011 JD 2520 with 200cx loader, 61" materials bucket, and Artillian JDQA Pallet Forks (42" forks). 62D MMM, ballast box, turfs, and loaded rears.

  8. Top | #6
    BigJim55's Avatar
    Join Date
    Nov 2013
    Last Online
    Yesterday @ 01:30 PM
    Location
    Schellsburg, PA
    Posts
    11,138
    Thanks
    3,002
    Thanked 1,381 Times in 1,084 Posts
    hello and thanks to all we finally got the stupid thing to work around 6am this morning. after the 2nd attempt of un plugging both tv and receiver, it finally decided to down load to the receiver, and then we could watch the tv.

    what caused all the fiasco, i don't know for sure, other than she did not shut things down in order

    so a big thank u to all
    jim

    2006 2520 mcut, 2004 x475, 1953 model 50, 1985 318-was my Dad's,
    king kutter tiller-60", frontier-stone rake, jd-4ft brush hog, frontier-6ft back-blade, frontier-forks, 48 inch forks,
    2-54inch jd snow plows, jd-5ft-pull brush hog,

    2018 835R gas model gator-"aka" the Cadillac i say!! 6ft jd snow plow-which already has a dtac out on it. i got just about everything on it i could at the time

  9. Top | #7

    Join Date
    Jan 2012
    Last Online
    Yesterday @ 06:39 PM
    Location
    East Central Indiana
    Posts
    1,470
    Thanks
    93
    Thanked 240 Times in 172 Posts
    Quote Originally Posted by BigJim55 View Post
    hello and thanks to all

    what caused all the fiasco, i don't know for sure, other than she did not shut things down in order

    I run into this alot with some of my clients. I had one that took me 5 trips back to get things back in sequence. I finally told them to not use the remotes to turn things of. Either do not turn them off at all or manually turn them off. I am not sure how they are turning things off now, but it has been 5 months since they have had a problem.
    BigJim55 likes this.
    Kioti CK3510SE HST, Kioti KL4030 Loader, John Deere 655 Tiller, Frontier LR2072 Landscape Rake, Virnig V50 Pallet Forks, Woods GB60 Box Blade
    John Deere X739 AWS 4X4, 60HC Auto Connect Deck, Front grader blade.
    John Deere 825i Gator

    John Deere Tractors I have owned in the past.
    425 AWS, 455, 4400, 2210, 4710, 2320, 2720, X475, 1026R, 4120, 2025R

  10. Top | #8
    RandyM's Avatar
    Join Date
    Sep 2010
    Last Online
    03-14-2017 @ 10:30 AM
    Location
    Stoughton, Wisconsin
    Posts
    6,594
    Thanks
    1,047
    Thanked 1,061 Times in 672 Posts
    Another reason I am glad I didn't get a smart TV.
    Randy __________________________________________________ ___ Be Safe!

    2009 - 2305 w/62 MMM **** 2008 - 2520 w/72 MMM **** 200CX w/49 bucket
    Weight Box w/extension ***** LandPride RTR 1558 Tiller ******* 54 Snow blower
    60 Gallon Demco Sprayer *** 60 Broom ** BB2060 Box Blade**SS2036B Spreader
    Everything Attachments ETA-PluggerV2-60 Aerator

    The more I learn, the less I know.

  11. Top | #9
    coaltrain's Avatar
    Join Date
    May 2014
    Last Online
    Yesterday @ 05:59 PM
    Location
    NW Penna
    Posts
    19,817
    Thanks
    1,058
    Thanked 3,061 Times in 2,226 Posts
    Quote Originally Posted by RandyM View Post
    Another reason I am glad I didn't get a smart TV.
    I learned (the hard way) to not buy electronics that try to do more than one thing. Like the "smart" TV - if the "smart" part goes bad it could very well make the entire TV unusable. Or if whatever company the "smart" part comes from - if they decide to stop updating the firmware you are out of luck.

    Same goes for cable modems with the router built in and other stuff like that. When the parts are seperate it is much easier to diagnose a problem plus then only replace the bad part instead of the whole thing.
    RandyM, pcabe5, Zebrafive and 4 others like this.
    ~Stan~
    It is what it is
    Knowledge is power, ignorance is bliss
    2520 w/200CX w/62D2

  12. Top | #10
    BigJim55's Avatar
    Join Date
    Nov 2013
    Last Online
    Yesterday @ 01:30 PM
    Location
    Schellsburg, PA
    Posts
    11,138
    Thanks
    3,002
    Thanked 1,381 Times in 1,084 Posts
    Quote Originally Posted by ChrisR View Post
    I run into this alot with some of my clients. I had one that took me 5 trips back to get things back in sequence. I finally told them to not use the remotes to turn things of. Either do not turn them off at all or manually turn them off. I am not sure how they are turning things off now, but it has been 5 months since they have had a problem.
    well tonight it has acted up again. the wife went to get out of net-flix to watch the Voice--same darn thing again. say's that the receiver has lost the signal again. i will be in touch with Dish tonight or tomorrow, for a exchange of this box. it has been on their working for -well-13 yrs or so-and no problem till now. i pay 5 bucks a month rent on it, so it is covered. just the pain of it breaking down.

    and to tell u the the truth, i don't know if my L&G TV has a button to turn it on or off. we have always used remote
    but thanks!
    pcabe5 and coaltrain like this.
    jim

    2006 2520 mcut, 2004 x475, 1953 model 50, 1985 318-was my Dad's,
    king kutter tiller-60", frontier-stone rake, jd-4ft brush hog, frontier-6ft back-blade, frontier-forks, 48 inch forks,
    2-54inch jd snow plows, jd-5ft-pull brush hog,

    2018 835R gas model gator-"aka" the Cadillac i say!! 6ft jd snow plow-which already has a dtac out on it. i got just about everything on it i could at the time

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 4 1 2 3 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •