John Deere 1010 gas
Results 1 to 4 of 4
Like Tree1Likes
  • 1 Post By tlock0331

Thread: John Deere 1010 gas

  1. Top | #1

    Join Date
    Oct 2014
    Last Online
    03-02-2016 @ 02:14 PM
    Location
    Quebec, Canada
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    John Deere 1010 gas

    I have a bulldozer John Deere 1010 gas and I have a problem with the engine, I have a broken liner. And it is hard to find used parts for this engine. I wonder if there is other John Deere motor kind I can put on the transmission of my bulldozer

    Thank

    Luc
    Québec/Canada

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    tlock0331's Avatar
    Join Date
    Jul 2013
    Last Online
    Yesterday @ 12:49 PM
    Location
    NE Kansas
    Posts
    218
    Thanks
    1
    Thanked 28 Times in 26 Posts
    Luc,

    I dont know if i am to late on this, but ill throw this out there anyway...im pretty sure the only equipment that used that style block were the 1010, 2010 and model 45 combines, MAYBE the ol 55's but dont quote me on that. The replacement model 20 series used a different style block. About the only saving grace is that you can use either the gas or the diesel as a direct replacement.

    the 1010 and 2010 style block used a block with a deck plate that had liners basically soldered to them, making them very one off ish. Replacement deck plates can be bought for about 1500 bucks, at least for the diesel models, so i would guess the gas models are in the same ball park. Once again, i am no expert.

    My diesel 2010 dozer had a stuck motor, but i was able to find a 2010 diesel tractor that had a bad transmission, so i was able to pick it up cheaper than just the deck plate cost. Last i checked, a major overhaul kit for the diesel was like 4 to 5 grand.

    Good luck with it
    BigJim55 likes this.

  4. Top | #3

    Join Date
    Feb 2015
    Last Online
    04-05-2016 @ 08:12 PM
    Location
    United States
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I found this information elsewhere but it was very useful information when I was also looking for another option for an engine:

    Here's some info. The 145, 155, and 165 will replace a 1010 engine regardless if a 115 gas or a 145 diesel.

    “H” is “Harvester Works, “T” is “Dubuque”,
    “G” is “gasoline” and “L” is “LP gas.”
    Some 45 Combines have Hercules JX-4C-3
    180 Power Unit is not a 1010/2010 type engine



    Deere 45 combine engines:

    145 Power Unit
    165 Power Unit
    155 Power Unit
    165 Power Unit



    HA-155D sleeveless engine used in 45 combine
    HB-145L
    HB-145G
    TA-145G
    TA-145L

    HA-165D - diesel used in 45 combine - ser # 45-2996 - 45-46000)
    HA-165G - gas used in 45 combine - ser # 45-35001 - 45-46000
    HB-165D - diesel used in 40 combine
    HB-165G - gas used in 111 peanut combine

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Mar 2015
    Last Online
    06-19-2015 @ 06:13 AM
    Location
    wyoming
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by tlock0331 View Post
    Luc,

    I dont know if i am to late on this, but ill throw this out there anyway...im pretty sure the only equipment that used that style block were the 1010, 2010 and model 45 combines, MAYBE the ol 55's but dont quote me on that. The replacement model 20 series used a different style block. About the only saving grace is that you can use either the gas or the diesel as a direct replacement.

    the 1010 and 2010 style block used a block with a deck plate that had liners basically soldered to them, making them very one off ish. Replacement deck plates can be bought for about 1500 bucks, at least for the diesel models, so i would guess the gas models are in the same ball park. Once again, i am no expert.

    My diesel 2010 dozer had a stuck motor, but i was able to find a 2010 diesel tractor that had a bad transmission, so i was able to pick it up cheaper than just the deck plate cost. Last i checked, a major overhaul kit for the diesel was like 4 to 5 grand.

    Good luck with it
    t lock i have a 2010 crawler would like to ask you some ? about mine i see you have one . you get a chance hit me up 3072990761 thanks.

  7. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •