Deere 210c loader adding 310c backhoe but nothing works
Results 1 to 5 of 5
Like Tree5Likes
  • 2 Post By Tx Jim
  • 3 Post By Shaggy

Thread: Deere 210c loader adding 310c backhoe but nothing works

  1. Top | #1

    Join Date
    May 2019
    Last Online
    08-23-2019 @ 01:36 PM
    Posts
    8
    Thanks
    4
    Thanked 2 Times in 2 Posts

    Deere 210c loader adding 310c backhoe but nothing works

    So I got this great deal on a 210C loader but wanted to add a backhoe. Found a backhoe from a 310c that connects right up. Followed instructions for the plumbing. needed to add and change some things on the 210c since it had no backhoe plumbing. The pump on the 210c is rated for 17gpm and I think the 310 was somewhere near the 23GPM range so I figured it would just run slower but I can not even get the stabilizers to move. The in and out lines were getting a little warm. I just don't know enough about hydraulics I guess.
    I will try to post a picture of the plumbing layout from the manual. Just not sure and running out of ideas.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Oct 2014
    Last Online
    Today @ 11:08 AM
    Location
    Coyote Flats,Texas
    Posts
    1,688
    Thanks
    15
    Thanked 290 Times in 261 Posts
    Do you have BH hyd's attached to 210C in series or teed into hyd system? To operate correctly hyd's must be attached in series on open center hyd's such as a 210C.
    Superglidesport and BigJim55 like this.

  4. Top | #3

    Join Date
    May 2019
    Last Online
    08-23-2019 @ 01:36 PM
    Posts
    8
    Thanks
    4
    Thanked 2 Times in 2 Posts

    Learn something new every day!

    So the Power Beyond port on this Gresen loader valve is only a Power Beyond port if you install a special sleeve that shuts off an internal flow in the valve while creating a path for the valves to be kept in a series. Who Knew? So the adapter I found is not sufficient to pass the hi pressure to the loader and stabilizer valves. Oil but no pressure!

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    May 2019
    Last Online
    08-23-2019 @ 01:36 PM
    Posts
    8
    Thanks
    4
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by Shaggy View Post
    So the Power Beyond port on this Gresen loader valve is only a Power Beyond port if you install a special sleeve that shuts off an internal flow in the valve while creating a path for the valves to be kept in a series. Who Knew? So the adapter I found is not sufficient to pass the hi pressure to the loader and stabilizer valves. Oil but no pressure!
    Had to find the manufacturer of that Loader Valve to get a proper sleeve. It is a Gresen valve but they were purchased by another company. Fortunately that Valve is still available to this day with little changes. Once that sleeve was installed it came alive!
    Kennyd, DRobinson and Tx Jim like this.

  7. The Following User Says Thank You to Shaggy For This Useful Post:

    Kennyd(08-23-2019)

  8. Top | #5

    Join Date
    Oct 2014
    Last Online
    Today @ 11:08 AM
    Location
    Coyote Flats,Texas
    Posts
    1,688
    Thanks
    15
    Thanked 290 Times in 261 Posts
    Thanks for update. I'm glad you got it operating,
    Jim

  9. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts