JD 110 TLB will not start
Results 1 to 8 of 8
Like Tree1Likes
  • 1 Post By dieselshadow

Thread: JD 110 TLB will not start

  1. Top | #1

    Join Date
    Jun 2013
    Last Online
    06-07-2013 @ 12:51 PM
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    JD 110 TLB will not start

    I turned the tractor off yesterday to talk to someone, I did not even leave the seat. When I went to turn it back on it the starter engaged for a moment then stopped. The hour meter on the instrument panel is blank making me think this is an electrical problem. When I turn the key on the guages needles move so it seems there is power there. While I was troubleshooting a couple of times the hour meter was on. But when I turned the key to start nothing happened and the hour meter went blank again. The ignition switch has power to it and seems to be working.

    HELP!!!

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Senior GTT Super Slacker Gizmo2's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 12:06 PM
    Location
    New York
    Posts
    33,609
    Thanks
    5,600
    Thanked 3,784 Times in 2,823 Posts
    Will it jump start?
    Maybe not the same tractor but our 2320 did just about the same thing. Running fine, turned it off, went to start it.. nothin. Replaced the battery.
    Keith

    JD 2320, 200CX FEL/61" bucket , 46 BH/16" bucket, Artillian Forks, 72" Snow Blade, Landscape Rake, Ballast Box, PHD, The Wife
    BX42 Chipper, XUV 560 Gator, Z915B ZTrak

  4. Top | #3

    Join Date
    Jun 2013
    Last Online
    06-07-2013 @ 12:51 PM
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Battery good

    I forgot to mention that the battery is good showing 12.7 volts at the starter and ignition switch...
    That would be the easiest fix, so I checked that first...thanks for the quick reply!

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Today @ 01:11 PM
    Location
    Joelton TN
    Posts
    19,505
    Thanks
    1,048
    Thanked 4,152 Times in 2,520 Posts
    Quote Originally Posted by KevinW View Post
    I forgot to mention that the battery is good showing 12.7 volts at the starter and ignition switch...
    That would be the easiest fix, so I checked that first...thanks for the quick reply!
    A high resistance connection can and will do that very thing. It'll show full power at a terminal until a high current draw is needed. I'd check the battery connections first. Remove and clean the cable ends thoroughly and grease them after reinstallation. Then I'd move onto the ignition switch and start troubleshooting it.


    Sent from my iPhone using Tapatalk 2
    arlen likes this.
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

  7. Top | #5
    Senior GTT Super Slacker Gizmo2's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 12:06 PM
    Location
    New York
    Posts
    33,609
    Thanks
    5,600
    Thanked 3,784 Times in 2,823 Posts
    Quote Originally Posted by dieselshadow View Post
    A high resistance connection can and will do that very thing. It'll show full power at a terminal until a high current draw is needed. I'd check the battery connections first. Remove and clean the cable ends thoroughly and grease them after reinstallation. Then I'd move onto the ignition switch and start troubleshooting it.


    Sent from my iPhone using Tapatalk 2
    Needs to check the voltage while trying to start the tractor first. Current Goes Up - Voltage Goes Down.
    Keith

    JD 2320, 200CX FEL/61" bucket , 46 BH/16" bucket, Artillian Forks, 72" Snow Blade, Landscape Rake, Ballast Box, PHD, The Wife
    BX42 Chipper, XUV 560 Gator, Z915B ZTrak

  8. Top | #6
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Today @ 01:11 PM
    Location
    Joelton TN
    Posts
    19,505
    Thanks
    1,048
    Thanked 4,152 Times in 2,520 Posts
    Quote Originally Posted by Gizmo2 View Post
    Needs to check the voltage while trying to start the tractor first. Current Goes Up - Voltage Goes Down.
    Absolutely correct. However, if you measure before a high resistance connection, you may not see a voltage drop. In this case, he might have a HR connection preventing said current increase (starter working).


    Sent from my iPhone using Tapatalk 2
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

  9. Top | #7
    Senior GTT Super Slacker Gizmo2's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 12:06 PM
    Location
    New York
    Posts
    33,609
    Thanks
    5,600
    Thanked 3,784 Times in 2,823 Posts
    Quote Originally Posted by dieselshadow View Post
    Absolutely correct. However, if you measure before a high resistance connection, you may not see a voltage drop. In this case, he might have a HR connection preventing said current increase (starter working).


    Sent from my iPhone using Tapatalk 2
    Start at the battery first. Voltage drops like a rock, replace battery.
    Keith

    JD 2320, 200CX FEL/61" bucket , 46 BH/16" bucket, Artillian Forks, 72" Snow Blade, Landscape Rake, Ballast Box, PHD, The Wife
    BX42 Chipper, XUV 560 Gator, Z915B ZTrak

  10. The Following User Says Thank You to Gizmo2 For This Useful Post:

    dieselshadow (06-07-2013)

  11. Top | #8
    Furu's Avatar
    Join Date
    Oct 2011
    Last Online
    09-18-2018 @ 01:23 PM
    Location
    Western WA
    Posts
    220
    Thanks
    30
    Thanked 43 Times in 30 Posts
    I had a similar issue when my 4720 was under warrantee. It took a while for it to be figured out but the swaged ground connection terminal at the battery had a problem that could not be found unless you were moving it (a lot) during the measurement. If it was not being moved everything checked out fine but no power to the starter.
    JD 4720 - 400CX FEL, Woods BB-720 Brush Bull and BH90X backhoe, Salsco 6210XT PTO Chipper, Farmi 501 Logging Winch, Bo-Dozer Grapple, LP RBT4096, Cammond Road grader/leveler and Rankin Trash Forks and Terex PT110 Forestry with Fecon BH074SS Mulcher

  12. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Similar Threads

  1. Wait to start....Wait to start....
    By ToddM in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 21
    Last Post: 03-18-2014, 04:41 PM
  2. 322 Won't start after running.
    By DBond in forum Vintage Lawn & Garden Tractors
    Replies: 6
    Last Post: 06-03-2013, 07:28 PM
  3. 2305 won't start
    By ljnelson109 in forum Sub Compact Utility Tractors (SCUT)
    Replies: 26
    Last Post: 03-02-2013, 09:19 PM
  4. could someone do a cold start vid
    By jd1023epro in forum Sub Compact Utility Tractors (SCUT)
    Replies: 53
    Last Post: 01-27-2013, 11:14 AM
  5. Gas trimmer won't start.
    By mjncad in forum Land Ownership, Landscaping, Lawn Care & Gardening
    Replies: 7
    Last Post: 08-09-2012, 05:59 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •