Just bought a 317 skidsteer. It pulls to the right when the sticks are fully forward. Is there an adjustment for this?
I only have experience with a bobcat 553, but yes there should be an adjustment on the sticks where they interface with the hydrostatic pumps.
I have ZERO experience with Deere skidsteers.
Last edited by mtrmn; 01-16-2017 at 11:48 AM.
Jack all four wheels off the ground up on blocks . raise the cab and the adjustments will be on the tops of the drive pumps .It might be a pain in the but to adjust if you don't have the break tool to run and release the brakes with the cab raised.
Last edited by tool_king; 03-26-2017 at 09:29 PM.