Fit Rite Hydraulics Top and Tilt kit video
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 36
Like Tree23Likes

Thread: Fit Rite Hydraulics Top and Tilt kit video

  1. Top | #1
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Today @ 06:57 AM
    Location
    Joelton TN
    Posts
    19,667
    Thanks
    1,063
    Thanked 4,252 Times in 2,560 Posts

    Thumbs up Fit Rite Hydraulics Top and Tilt kit video

    If you were to order a hydraulic top and tilt kit or a rear auxiliary valve for a 2520 or a 2720 from Fit Rite Hydraulics, this is what it would look like. Other model tractors would be similar. Brian can customize your valve to your needs, spool count and spool type are your choice. This valve is a 3 spool, the top two are float, bottom is a standard spool,

    Kennyd, glc, DRobinson and 8 others like this.
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

  2. The Following User Says Thank You to dieselshadow For This Useful Post:

    MtnViewRanch (04-06-2013)

  3. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  4. Top | #2
    T-Mo's Avatar
    Join Date
    Nov 2011
    Last Online
    Today @ 05:53 AM
    Location
    Missouri
    Posts
    2,670
    Thanks
    473
    Thanked 850 Times in 511 Posts
    Nice, Jason. I want one for my 316.
    Without ice cream, there will be darkness and chaos!
    Olympian Don Kardong

    1965 110s, 1966 110, 1967 112, 2001 LT150, 2003 GT245, 2004 GX345, 2006 X320

  5. Top | #3
    Fit Rite Hydraulics MtnViewRanch's Avatar
    Join Date
    Nov 2012
    Last Online
    Yesterday @ 06:10 PM
    Location
    Southern California
    Posts
    627
    Thanks
    89
    Thanked 126 Times in 101 Posts
    Great video.

    There's to much paint on that box blade.

    Jason, lets see some dirt flowing.
    fuelhog2000 likes this.

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4
    Bubber's Avatar
    Join Date
    May 2012
    Last Online
    Today @ 09:34 AM
    Location
    Georgia
    Posts
    3,549
    Thanks
    439
    Thanked 591 Times in 380 Posts
    Would this be feasible on a 1026R? Not sure if there is enough space for the tilt, or not. I'd need to mount a valve too... Hmmm....
    2014 2032r Classic...


    -Dan

  8. Top | #5
    Fit Rite Hydraulics MtnViewRanch's Avatar
    Join Date
    Nov 2012
    Last Online
    Yesterday @ 06:10 PM
    Location
    Southern California
    Posts
    627
    Thanks
    89
    Thanked 126 Times in 101 Posts
    Quote Originally Posted by Bubber View Post
    Would this be feasible on a 1026R? Not sure if there is enough space for the tilt, or not. I'd need to mount a valve too... Hmmm....
    I'm actually working on a kit for a guy right now. It will not be quite as complete as the one for the 2520-2720, but close. This customer is going to have 4 sets of remotes, 2 tilt cylinders, top link. etc. My cylinders are not short enough to get the equal amount of tilt that I normally build, so we are going with one for each side. should be pretty nice when it's all done.
    Vern1026R likes this.

  9. Top | #6
    Bubber's Avatar
    Join Date
    May 2012
    Last Online
    Today @ 09:34 AM
    Location
    Georgia
    Posts
    3,549
    Thanks
    439
    Thanked 591 Times in 380 Posts
    Quote Originally Posted by MtnViewRanch View Post
    I'm actually working on a kit for a guy right now. It will not be quite as complete as the one for the 2520-2720, but close. This customer is going to have 4 sets of remotes, 2 tilt cylinders, top link. etc. My cylinders are not short enough to get the equal amount of tilt that I normally build, so we are going with one for each side. should be pretty nice when it's all done.
    Ok, I'm interested. Please keep us updated on this.
    2014 2032r Classic...


    -Dan

  10. Top | #7
    robpm's Avatar
    Join Date
    Feb 2012
    Last Online
    06-23-2019 @ 03:55 PM
    Location
    Bloomingdale, NJ which is in the north east part of NJ
    Posts
    1,231
    Thanks
    236
    Thanked 163 Times in 114 Posts
    Nice video Jason and I like the TnT. Brian nice job as well. I hope to do something with the valves this summer for my 990 as well.
    Rob

    second owner of '05' John Deere 990 CUT with the following:
    JD 300CX FEL
    JD 8B BH
    JD PF
    Artillian PF with 2" reciever hitch adapter
    JD BB
    SpeeCo 3PH Wood Splitter
    Also an independent SplitFire Wood splitter

  11. Top | #8

    Join Date
    Mar 2013
    Last Online
    08-18-2019 @ 06:54 AM
    Location
    CT
    Posts
    768
    Thanks
    222
    Thanked 58 Times in 47 Posts
    Interested in a kit/setup for my 1026 as well... Keep us posted! A video of the 1026 setup would be sweet!
    John Deere 1026R (MY 2012) Purchased April 2013
    H120 FEL with 49" bucket, Ken's 5/16" Bolt on Hooks & BXpanded Piranha Tooth Bar
    60D (7-iron) Autoconnect MMM
    JD 3-Bag MCS w/Honda GC160 Power "Pak"
    260 BH with 12" bucket
    Artillian 42"x3" Forks w/2" Receiver
    48" EA XTreme Duty Box Blade
    36" EA Independent Wheel Lawn Aerator w/Alternating Depth Tines
    52" Ratchet Rake
    iMatch QH

    2003 John Deere LX266
    42" Freedom Mulching Deck
    Larger LX model wheels/tires

  12. Top | #9

    Join Date
    Mar 2013
    Last Online
    08-18-2019 @ 06:54 AM
    Location
    CT
    Posts
    768
    Thanks
    222
    Thanked 58 Times in 47 Posts
    Anything?
    John Deere 1026R (MY 2012) Purchased April 2013
    H120 FEL with 49" bucket, Ken's 5/16" Bolt on Hooks & BXpanded Piranha Tooth Bar
    60D (7-iron) Autoconnect MMM
    JD 3-Bag MCS w/Honda GC160 Power "Pak"
    260 BH with 12" bucket
    Artillian 42"x3" Forks w/2" Receiver
    48" EA XTreme Duty Box Blade
    36" EA Independent Wheel Lawn Aerator w/Alternating Depth Tines
    52" Ratchet Rake
    iMatch QH

    2003 John Deere LX266
    42" Freedom Mulching Deck
    Larger LX model wheels/tires

  13. Top | #10
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Today @ 06:57 AM
    Location
    Joelton TN
    Posts
    19,667
    Thanks
    1,063
    Thanked 4,252 Times in 2,560 Posts
    Quote Originally Posted by Green Man View Post
    Anything?
    Not to speak for Brian, but the last I talked with him there was several hydraulic projects going on for the 1 series. He has been super busy. I can tell you that what he's been working on sounds really cool.
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

  14. The Following User Says Thank You to dieselshadow For This Useful Post:

    MtnViewRanch (05-16-2013)

  15. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 4 1 2 3 ... LastLast

Similar Threads

  1. Fit Rite Hydraulic Top and Tilt kit
    By dieselshadow in forum Fit Rite Hydraulics
    Replies: 26
    Last Post: 08-07-2017, 10:44 PM
  2. Replies: 9
    Last Post: 07-12-2013, 11:03 PM
  3. '73 410 , slow loader bucket hydraulics, weak hoe hydraulics
    By daywelding in forum Construction Equipment
    Replies: 5
    Last Post: 09-01-2011, 10:06 PM
  4. Cheap top and tilt on craigslist
    By Brian in forum Off Topic
    Replies: 0
    Last Post: 10-08-2010, 08:40 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •