Loader Hydraulic Safety Lock Block
Results 1 to 9 of 9
Like Tree27Likes
  • 2 Post By jgayman
  • 2 Post By RetiredDoc
  • 6 Post By Kennyd
  • 9 Post By jgayman
  • 4 Post By balrog006
  • 2 Post By BigJim55
  • 2 Post By xcopterdoc

Thread: Loader Hydraulic Safety Lock Block

  1. Top | #1
    Thowle's Avatar
    Join Date
    Jul 2012
    Last Online
    09-07-2019 @ 07:40 PM
    Location
    West Kentucky
    Posts
    167
    Thanks
    20
    Thanked 16 Times in 13 Posts

    Loader Hydraulic Safety Lock Block

    Anyone know where to buy a safety lockout that fits over the cylinder arm for a loader?

    Thought about getting some U channel and cutting it down to fit, but surely there is something already out there the correct size?

    My H180 lift arm has an exposed cylinder of about 22" x 1.25" at full lift.

    Raising the loader is required to get the side panels and front grille off of the 4066R; standing under the loader wouldn't be fun if a hose broke
    2017 John Deere 4066R w/ Cab & 2019 John Deere 5100R
    [Frontier] LS1125 Sprayer | DS1508 Disk | CS1384 Seeder | PR1172 Power Rake | RR2211 Rotary Rake
    [John Deere] H180 Loader | 540R Loader | E15 Cutter | 630 MoCo | 338 Square Baler
    [Unverferth] Perfecta 10 Field Cultivator



    Elwoh Solutions
    Website: www.elwoh.com | Blog: blog.elwoh.com

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 11:24 PM
    Location
    Central Pennsylvania
    Posts
    9,762
    Thanks
    366
    Thanked 1,597 Times in 1,215 Posts
    I've never seen anything commercially available. Most of what I have seen was home made from angle iron and zip-tied to the cylinder rod.
    Kennyd and PJR832 like this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  4. Top | #3
    RetiredDoc's Avatar
    Join Date
    Apr 2016
    Last Online
    06-13-2019 @ 06:24 PM
    Location
    Central Savannah River Area (CSRA)
    Posts
    913
    Thanks
    162
    Thanked 144 Times in 110 Posts
    Quote Originally Posted by jgayman View Post
    I've never seen anything commercially available. Most of what I have seen was home made from angle iron and zip-tied to the cylinder rod.
    Just in case someone doesn't know this trick:

    https://www.youtube.com/watch?v=MV1FT5cWgZ0
    BigJim55 and Daveb like this.
    1025R, H120 FEL, 60D MMM, Rhinohide canopy, iMatch, Frontier BB2060L, SS1067, RC2048, Heavy Hitch front weight carrier, subsoiler, trash bin carrier, rear hitch plate, Titan ballast box, 42 inch forks, Tarter chain harrow, Yard Tuff arena drag, DragnFly Arena Groomer, Newer Model 225 manure spreader, Ken's bucket hooks, Piranha tooth bar, Fimco 40 gallon 3pt boom sprayer,

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Yesterday @ 08:08 PM
    Location
    Westminster, MD
    Posts
    16,233
    Thanks
    4,990
    Thanked 4,029 Times in 2,509 Posts
    They are standard on commercial/industrial grade machines, but I've never seen them on consumer grade machines or available in the aftermarket. Even at the big Louisville Farm show I saw all the OEM's just using angle iron and zip ties just like JG mentioned.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  7. Top | #5
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 11:24 PM
    Location
    Central Pennsylvania
    Posts
    9,762
    Thanks
    366
    Thanked 1,597 Times in 1,215 Posts
    Quote Originally Posted by Kennyd View Post
    They are standard on commercial/industrial grade machines, but I've never seen them on consumer grade machines or available in the aftermarket. Even at the big Louisville Farm show I saw all the OEM's just using angle iron and zip ties just like JG mentioned.
    Hmmm... might be a new product opportunity. Ken's Loader Locks. Manufacturing should be a snap requiring only a cut-off saw and filing off the four sharp corners. Available in various lengths to match specific loaders. Your choice of green or orange.

    Kennyd, BigJim55, mark02tj and 6 others like this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  8. Top | #6

    Join Date
    Sep 2014
    Last Online
    Yesterday @ 08:25 PM
    Location
    West Michigan
    Posts
    1,892
    Thanks
    94
    Thanked 218 Times in 174 Posts
    Quote Originally Posted by Thowle View Post
    Anyone know where to buy a safety lockout that fits over the cylinder arm for a loader?

    Thought about getting some U channel and cutting it down to fit, but surely there is something already out there the correct size?

    My H180 lift arm has an exposed cylinder of about 22" x 1.25" at full lift.

    Raising the loader is required to get the side panels and front grille off of the 4066R; standing under the loader wouldn't be fun if a hose broke
    How about removing the loader so it isn’t in the way and isn’t a potential hazard to the person trying to access the panels? It would probably improve access and improve your position for any necessary services as well?
    Kennyd, BigJim55, johnH123 and 1 others like this.
    2004-L130

    2013-2032r, Curtis Hard side cab (project), H130 FEL & 61"bucket, Artillian Modular Grapple on HD frame with Diverter, 2300# Artillian frame w/ 36" x 3" tines, 46BH 9" & 13" bucket, Frontier RB1060, HLA 1000 series 60" JDQA Snow plow, JD ballast box, RK QH, Homemade 3pt multi purpose hitch, 117W of extra LED lights on ROPS and side Brush guards, Ken's bolt on hooks-3x, Ideal Knife grooved R-4's.

  9. Top | #7
    BigJim55's Avatar
    Join Date
    Nov 2013
    Last Online
    Yesterday @ 04:32 PM
    Location
    Schellsburg, PA
    Posts
    11,131
    Thanks
    3,001
    Thanked 1,381 Times in 1,084 Posts
    Quote Originally Posted by RetiredDoc View Post
    Just in case someone doesn't know this trick:

    https://www.youtube.com/watch?v=MV1FT5cWgZ0
    retired doc-i used to watch this fella a lot-but now he has taken to talking about if u want to watch and hear my tip for this video-go to my patron video and i will tell u there.

    not that i'm against anyone wanting to make more money-but i refuse to pay for that fee. i just won't so i unsubbed him the other week. he has had some very good tips in the yrs i have watched him.
    PJR832 and buckteeth445 like this.
    jim

    2006 2520 mcut, 2004 x475, 1953 model 50, 1985 318-was my Dad's,
    king kutter tiller-60", frontier-stone rake, jd-4ft brush hog, frontier-6ft back-blade, frontier-forks, 48 inch forks,
    2-54inch jd snow plows, jd-5ft-pull brush hog,

    2018 835R gas model gator-"aka" the Cadillac i say!! 6ft jd snow plow-which already has a dtac out on it. i got just about everything on it i could at the time

  10. Top | #8
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Yesterday @ 07:52 PM
    Location
    Central New York
    Posts
    11,124
    Thanks
    1,880
    Thanked 1,506 Times in 1,233 Posts
    Quote Originally Posted by BigJim55 View Post
    retired doc-i used to watch this fella a lot-but now he has taken to talking about if u want to watch and hear my tip for this video-go to my patron video and i will tell u there.

    not that i'm against anyone wanting to make more money-but i refuse to pay for that fee. i just won't so i unsubbed him the other week. he has had some very good tips in the yrs i have watched him.
    I just noticed that the other day too, maybe I don't totally understand it but I'm not giving him $25 to watch his videos, too bad really.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  11. Top | #9
    xcopterdoc's Avatar
    Join Date
    Jan 2012
    Last Online
    Today @ 12:21 AM
    Location
    nc
    Posts
    1,653
    Thanks
    209
    Thanked 863 Times in 330 Posts
    Here are the ones we use. They come in different lengths.Click image for larger version. 

Name:	0613181617.jpg 
Views:	7 
Size:	29.4 KB 
ID:	630882

    Sent from my LGL52VL using Tapatalk
    Kennyd and PJR832 like this.

  12. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •