Dining Room Make-Over...
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 20
Like Tree161Likes

Thread: Dining Room Make-Over...

  1. Top | #1
    flyweight's Avatar
    Join Date
    Jun 2014
    Last Online
    Today @ 07:59 PM
    Location
    Louisiana, (southeast)
    Posts
    9,366
    Thanks
    820
    Thanked 1,733 Times in 1,194 Posts

    Dining Room Make-Over...

    Wife wanted to refresh the dining room. She wanted one wall with to have shiplap.

    The dining room walls are sheetrock. We didn't want to remove the sheetrock from the wall it was going to be installed on, so we decided on Faux Shiplap.
    Click image for larger version. 

Name:	IMG_2689.JPG 
Views:	16 
Size:	65.0 KB 
ID:	449114

    We started by ripping 1/4" Luan to a width of 8". I marked the location of the studs on that wall and began nailing the boards in place. I used a 4' level to on each board, as to keep think in line. The board spacing is a "double-nickel" gap between each board. The vertical gaps between are also the same spacing. The cut edges of the boards were primed a few days before installation.
    Click image for larger version. 

Name:	IMG_2703.JPG 
Views:	15 
Size:	76.5 KB 
ID:	449130

    Click image for larger version. 

Name:	IMG_2720.JPG 
Views:	15 
Size:	85.8 KB 
ID:	449138

    Once all board were installed, we primed all four walls.
    Click image for larger version. 

Name:	IMG_2770.JPG 
Views:	15 
Size:	56.8 KB 
ID:	449146

    It's nice to have quality help.
    Click image for larger version. 

Name:	IMG_2771.JPG 
Views:	17 
Size:	72.9 KB 
ID:	449154

    Next day, we began painting the first coat of Sherwin Williams Alabaster White.
    Click image for larger version. 

Name:	IMG_2778.JPG 
Views:	15 
Size:	50.3 KB 
ID:	449162

    Thanks to Mrs. FW, the last coat is done today.
    Click image for larger version. 

Name:	IMG_2785.JPG 
Views:	14 
Size:	44.9 KB 
ID:	449178

    Next will be the base board, windows and door trim. Then, trim around the shiplap wall. I'll post pics of the entire dining room when completed.
    Michael

    2019 JD Z540R 54" cutting deck w/MulchControl™
    1984 JD 750
    1971 JD 15 Chainsaw ← hasn't run since ~1975

    Also have a bunch of other stuff.
    ---------------------------------------
    " If there's no one around to smell me, do I really stink"?
    - John Wells - Brewster County, West Texas.










  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    DRobinson's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 06:31 PM
    Location
    Northeastern PA
    Posts
    10,503
    Thanks
    2,089
    Thanked 2,285 Times in 1,414 Posts
    Nice work, Mr. and Mrs Flyweight.
    etcallhome, pcabe5, Levi and 4 others like this.
    Don

    2320, 54D MMM, 200CX FEL, 54 Front Blade with Artillian Extensions, Omni Transformer Hitch
    445, 54 mower and 54 front blade
    80 dump cart, 21 walk behind mower

  4. The Following User Says Thank You to DRobinson For This Useful Post:

    flyweight (09-11-2017)

  5. Top | #3
    Official "Groovie" Dude
    Join Date
    Jun 2011
    Last Online
    @
    Location
    N/A
    Posts
    5,663
    Thanks
    1,459
    Thanked 744 Times in 605 Posts
    That's looks great. Your wife is a heck of a painter.

    You must have been in supervisor mode when you were taking pictures.
    mjncad, etcallhome, Gizmo2 and 6 others like this.

  6. The Following User Says Thank You to pcabe5 For This Useful Post:

    flyweight (09-11-2017)

  7. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  8. Top | #4
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Today @ 06:57 PM
    Location
    Central New York
    Posts
    11,128
    Thanks
    1,882
    Thanked 1,507 Times in 1,234 Posts
    Looks nice FW


    Sent from my iPhone using Tapatalk
    etcallhome, pcabe5, Levi and 3 others like this.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  9. The Following User Says Thank You to PJR832 For This Useful Post:

    flyweight (09-11-2017)

  10. Top | #5
    Drifterbike's Avatar
    Join Date
    Jul 2015
    Last Online
    Today @ 11:43 AM
    Location
    Hampton Ill
    Posts
    2,710
    Thanks
    1,073
    Thanked 317 Times in 278 Posts
    Looks very nice. You are lucky. My wife won't paint a lick just complain when it's not done.
    mjncad, etcallhome, pcabe5 and 6 others like this.
    2018 2038R 220R FEL, 72" Mower, Radial tires, wheel spacers, dual rear SVCs, CtA grapple, single point for FEL, 60" broom with front hitch;2018 1025R 54"auto connect, HDAP tires, Quick Hitch, Ballast Box, Etc...;1967 1020 3cylinder gas, #47 FEL, 72" Landpride Grooming Mower, 6ft box blade, For Sale(no Hurry); life Member NRA since 1974

  11. The Following User Says Thank You to Drifterbike For This Useful Post:

    flyweight (09-11-2017)

  12. Top | #6
    Corndog Hater ColonyPark's Avatar
    Join Date
    Aug 2011
    Last Online
    Today @ 12:03 PM
    Location
    WNY
    Posts
    10,654
    Thanks
    3,552
    Thanked 1,127 Times in 960 Posts
    Nice project. I looks great
    etcallhome, pcabe5, Levi and 3 others like this.
    Jamie

    2011 JD 1026R - w/60" NON-AutoConnect MMM, FEL w/WR Long Toothbar, 47" Front Mount Snowblower, 54" Front Mount Blade w/ Rubber Edge, 48" KingKutter Tiller & Brush Hog, CountyLine Carry All and CountyLine 60" Rear Blade, Pat's EZ-Change Quick Hitch System
    1990 JD 185 - 46"MMM w/Power Flow Bagger

  13. The Following User Says Thank You to ColonyPark For This Useful Post:

    flyweight (09-11-2017)

  14. Top | #7
    Marlin's Avatar
    Join Date
    Sep 2014
    Last Online
    05-22-2019 @ 03:31 PM
    Location
    The Willamette Valley, Laurelwood/Gaston, Oregon
    Posts
    4,682
    Thanks
    1,960
    Thanked 746 Times in 464 Posts


    Marlin
    Marlin

    JD 1026R - March/2013
    JD H120 NSL Loader, JD 647 Tiller, JD Ballast Box
    Frontier BB2048L Box Scraper
    IMatch, Piranha Tooth Bar
    Ken's Bolt-On Hooks & FEL Receiver Hitch
    John Deere Wheel & Suitcase Weights
    Wheel Spacers - 2" Front, 4" Rear
    Heavy Hitch Hitch’N Can
    LED Lights Front & Rear Facing
    Artillian Forks & Front Hoe
    R4 Tires Front & Rear


    
"Prayer can never be in excess." ~ C. H. Spurgeon




  15. Top | #8
    flyweight's Avatar
    Join Date
    Jun 2014
    Last Online
    Today @ 07:59 PM
    Location
    Louisiana, (southeast)
    Posts
    9,366
    Thanks
    820
    Thanked 1,733 Times in 1,194 Posts
    Quote Originally Posted by pcabe5 View Post
    That's looks great. Your wife is a heck of a painter. You must have been in supervisor mode when you were taking pictures.
    I learned from master Giz.
    ---------------------------------------------------------------------------------------------

    I forgot to add these pics yesterday. The patio and breezeway are an obstacle course.

    All trim is #1 pine. Wife want's the old look, no fancy trim.
    These trim boards are primed, with the first coat applied on Saturday. I have to put a second coat on today.

    Click image for larger version. 

Name:	IMG_2786.JPG 
Views:	8 
Size:	79.7 KB 
ID:	449954

    Click image for larger version. 

Name:	IMG_2789.JPG 
Views:	8 
Size:	116.0 KB 
ID:	449962
    mjncad, etcallhome, Gizmo2 and 6 others like this.
    Michael

    2019 JD Z540R 54" cutting deck w/MulchControl™
    1984 JD 750
    1971 JD 15 Chainsaw ← hasn't run since ~1975

    Also have a bunch of other stuff.
    ---------------------------------------
    " If there's no one around to smell me, do I really stink"?
    - John Wells - Brewster County, West Texas.










  16. Top | #9
    Senior GTT Super Slacker Gizmo2's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 04:11 PM
    Location
    New York
    Posts
    34,166
    Thanks
    5,769
    Thanked 3,947 Times in 2,910 Posts
    Nice flyweight.
    Keep those supervisory pictures coming.
    Keith

    JD 2320, 200CX FEL/61" bucket , 46 BH/16" bucket, Artillian Forks, 72" Snow Blade, Landscape Rake, Ballast Box, PHD, The Wife
    BX42 Chipper, XUV 560 Gator, Z915B ZTrak

  17. The Following User Says Thank You to Gizmo2 For This Useful Post:

    flyweight (09-11-2017)

  18. Top | #10
    Bonehead Club Lackey Levi's Avatar
    Join Date
    Jul 2013
    Last Online
    Today @ 12:42 PM
    Location
    NE Tenn.
    Posts
    10,147
    Thanks
    2,985
    Thanked 1,896 Times in 1,064 Posts
    Looks great FW!
    Want another job this coming spring?
    1026R -- 60D mmm -- H120 Loader -- Curtis 150 Tiller -- DR 3 point Chipper -- Howse Middle Buster -- Brinly 16 Blade Disk -- Kodiak 5' Box Blade -- 12-42 lb. suitcase weights -- Lawn roller -- Upgraded seat springs from psrumors -- Kennyd's bolt on hooks & clevis -- BXpanded tooth bar -- CMI 6' wagon -- Heavy Hitch Cultivator /garden bedder / hiller attachments --

    Donated by some great people/vendors on here: 72 lb. wheel weights -- Bro-Tek 1˝" rear wheel spacers.
    NRA Life Member

  19. The Following User Says Thank You to Levi For This Useful Post:

    flyweight (09-11-2017)

  20. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •