CNC Router Project
Results 1 to 8 of 8
Like Tree44Likes
  • 19 Post By GigaWatt
  • 3 Post By MeagerHair
  • 6 Post By Bubber
  • 10 Post By GigaWatt
  • 1 Post By Jeff B
  • 1 Post By mjncad
  • 1 Post By dianedebuda
  • 3 Post By GigaWatt

Thread: CNC Router Project

  1. Top | #1
    GigaWatt's Avatar
    Join Date
    Mar 2019
    Last Online
    Yesterday @ 06:42 PM
    Location
    Mid Missouri
    Posts
    26
    Thanks
    6
    Thanked 2 Times in 2 Posts

    CNC Router Project

    Building projects on my cnc router is tied for my attention with my using my 2305. I usually try to use the cnc mainly in the winter, leaving the nice weather for tractor work. Here is one of my latest clock projects. It was mill from a 1" thick X 24" diameter piece of pine. I donated it to the nursing home my mother resides in.
    Attached Thumbnails Attached Thumbnails Geese-Clock.JPG  
    mjncad, Kennyd, ChrisR and 16 others like this.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    MeagerHair's Avatar
    Join Date
    Sep 2015
    Last Online
    Yesterday @ 06:59 PM
    Location
    Cumberland Valley - PA
    Posts
    1,057
    Thanks
    47
    Thanked 152 Times in 105 Posts
    Quote Originally Posted by GigaWatt View Post
    Building projects on my cnc router is tied for my attention with my using my 2305. I usually try to use the cnc mainly in the winter, leaving the nice weather for tractor work. Here is one of my latest clock projects. It was mill from a 1" thick X 24" diameter piece of pine. I donated it to the nursing home my mother resides in.
    Very neat. The stain work is very sharp, so more skill involved than CNC programming.
    rtgt, Herminator and JD4044M like this.
    2007 2305, New to Me 12/15
    62c MMM, Independent Mid Lift
    H130 FEL, Heavy Hitch, , IMatch, Ken's Bolt on Hooks,
    N1 Sunshade, 48" Flex Hitch King Kutter,
    72" CTA Snow Pusher, CIDAttachments Forks
    LP 60” Grader Scrapper, R2 Edge Tamers
    Hitch'N Can

  4. Top | #3
    Bubber's Avatar
    Join Date
    May 2012
    Last Online
    Yesterday @ 09:16 PM
    Location
    Georgia
    Posts
    3,545
    Thanks
    437
    Thanked 591 Times in 380 Posts
    That is very nice! Can you share some details on your machine?
    mjncad, rtgt, OxPath and 3 others like this.
    2014 2032r Classic...


    -Dan

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    GigaWatt's Avatar
    Join Date
    Mar 2019
    Last Online
    Yesterday @ 06:42 PM
    Location
    Mid Missouri
    Posts
    26
    Thanks
    6
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by Bubber View Post
    That is very nice! Can you share some details on your machine?
    CNC Router Parts Pro4824 with 2.2kW water cooled spindle.
    Attached Thumbnails Attached Thumbnails IMG_1168.JPG  
    mjncad, Kennyd, Bubber and 7 others like this.

  7. The Following User Says Thank You to GigaWatt For This Useful Post:

    Bubber (04-07-2019)

  8. Top | #5

    Join Date
    Sep 2015
    Last Online
    Yesterday @ 10:37 PM
    Location
    Burton, Ohio
    Posts
    2,698
    Thanks
    521
    Thanked 428 Times in 337 Posts
    Really cool!
    Did it come with it's own drawing package or do you import the geometry?
    rtgt likes this.
    1025R FILB, vintage: 2015
    54D MM mowing deck
    Imatch hitch
    2 inch receiver for three point
    "18" cart
    Piranha Tooth Bar
    Ken's hooks and differential lock pedal
    Artillian 36" forks
    Stihl equipment: Saws; MS261C, MS462C, MS661RCM and Blower; BR600 and Trimmer; FS70R and Hedge Cutter; HL 56K and Pressure Washer; RB400
    Husky log splitter

  9. Top | #6
    mjncad's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 01:57 AM
    Location
    Front Range of Colorado
    Posts
    6,897
    Thanks
    1,764
    Thanked 543 Times in 428 Posts
    That's a nice CNC setup you have.
    rtgt likes this.
    I have more ideas than ambition.


  10. Top | #7

    Join Date
    Jul 2016
    Last Online
    Yesterday @ 08:10 PM
    Location
    Austin TX
    Posts
    2,420
    Thanks
    24
    Thanked 525 Times in 388 Posts
    I'm lusting in my heart (for the router, of course).
    rtgt likes this.

  11. Top | #8
    GigaWatt's Avatar
    Join Date
    Mar 2019
    Last Online
    Yesterday @ 06:42 PM
    Location
    Mid Missouri
    Posts
    26
    Thanks
    6
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by Jeff B View Post
    Really cool!
    Did it come with it's own drawing package or do you import the geometry?
    I use Vectric Aspire 9.5 for design work, creating G Code and Mach 3 to control the machine.
    mjncad, rtgt and Jeff B like this.

  12. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Similar Threads

  1. Replacing a network router.
    By ChrisR in forum Computer/Electronics
    Replies: 12
    Last Post: 07-27-2017, 07:25 AM
  2. Router Table
    By BillQ in forum Home & Workshop Projects
    Replies: 19
    Last Post: 07-28-2016, 06:38 AM
  3. Wi-Fi router recomendations please
    By Kennyd in forum Off Topic
    Replies: 10
    Last Post: 08-04-2012, 09:18 AM
  4. My first attemp at CNC "Machining" with the new Bridgeport Mill w/Video
    By Kennyd in forum Metalworking & Fabrication
    Replies: 7
    Last Post: 10-24-2011, 11:51 PM
  5. My new (to me) Bridgeport MILL w/CNC conversion
    By Kennyd in forum Metalworking & Fabrication
    Replies: 10
    Last Post: 10-18-2011, 11:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •