Rear scv's question
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
Like Tree19Likes

Thread: Rear scv's question

  1. Top | #1
    Sleepy's Avatar
    Join Date
    Aug 2017
    Last Online
    02-06-2019 @ 05:50 PM
    Location
    Decatur,TN
    Posts
    234
    Thanks
    0
    Thanked 28 Times in 21 Posts

    Rear scv's question

    Sitting in the seat of my 2033r, there are two levers for the remotes. The lever furthest to the right, you can move it forward to run fluid one direction, or you can pull it back towards you and run fluid in the other direction. OR you can push it all the way forward into a notch (there is a symbol that looks like AC-alternating current). What does it do in this all the way forward position?
    ,Sleepy- "Living the dream!" -- 2017 2032R w/ loader and backhoe; JD Z930M 60"

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 08:06 PM
    Location
    Westminster, MD
    Posts
    15,887
    Thanks
    4,798
    Thanked 3,807 Times in 2,415 Posts
    I would assume it’s “float” just like on the joystick loader control.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, Trac-Vac 854 (for sale) and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  4. Top | #3

    Join Date
    Jun 2014
    Last Online
    Today @ 09:18 PM
    Location
    Berlin, MA
    Posts
    4,492
    Thanks
    94
    Thanked 833 Times in 632 Posts
    That position where it locks is called "float". It connects all lines to the hydro tank so the lines are unpressurized. That allows your attachment to "float" with the contours of the ground. The forces of gravity and resistance control what the implement does instead of hydraulics. You can think of it as "neutral for hydraulics".
    OxPath, raco232 and PJR832 like this.
    D160 Mower/Bagger.
    2014 2032R tractor/H130 FEL w/Bolt-On Hooks/54" Snow Plow/iMatch Quick-Hitch/County Line 5' Scraper blade/County Line Carry-All/Artillian 42" Forks & QH Adapter/JD Ballast Box/Frontier SB1164 3PH Blower/Leinbach PHD/Wallenstien BX42 Chipper

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    Sleepy's Avatar
    Join Date
    Aug 2017
    Last Online
    02-06-2019 @ 05:50 PM
    Location
    Decatur,TN
    Posts
    234
    Thanks
    0
    Thanked 28 Times in 21 Posts
    So does that also put the rockshaft in float mode? Like if I have a box on
    PJR832 likes this.
    ,Sleepy- "Living the dream!" -- 2017 2032R w/ loader and backhoe; JD Z930M 60"

  7. Top | #5
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 08:06 PM
    Location
    Westminster, MD
    Posts
    15,887
    Thanks
    4,798
    Thanked 3,807 Times in 2,415 Posts
    Quote Originally Posted by Sleepy View Post
    So does that also put the rockshaft in float mode? Like if I have a box on
    No. Not related to the rockshaft at all, completely independent of that.


    BUT: The rockshaft/3PH is always in "float", there is no down pressure other than gravity, you just have to have the handle all the way forwards for full range of travel.
    Tomfive, OxPath, raco232 and 1 others like this.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, Trac-Vac 854 (for sale) and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  8. Top | #6
    Sleepy's Avatar
    Join Date
    Aug 2017
    Last Online
    02-06-2019 @ 05:50 PM
    Location
    Decatur,TN
    Posts
    234
    Thanks
    0
    Thanked 28 Times in 21 Posts
    I've got a lot to learn. Thanks guys.
    PJR832 likes this.
    ,Sleepy- "Living the dream!" -- 2017 2032R w/ loader and backhoe; JD Z930M 60"

  9. Top | #7
    Sleepy's Avatar
    Join Date
    Aug 2017
    Last Online
    02-06-2019 @ 05:50 PM
    Location
    Decatur,TN
    Posts
    234
    Thanks
    0
    Thanked 28 Times in 21 Posts
    Curious. What would you have plumbed into the rear remotes that you would need in float mode? And does it put both remotes in float?
    raco232 likes this.
    ,Sleepy- "Living the dream!" -- 2017 2032R w/ loader and backhoe; JD Z930M 60"

  10. Top | #8
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 08:06 PM
    Location
    Westminster, MD
    Posts
    15,887
    Thanks
    4,798
    Thanked 3,807 Times in 2,415 Posts
    1) A plow blade; A rear finish mower that rides on it's own wheels; A hydraulic top link in some cases;

    2) No. Only the one remote would float.
    raco232 and PJR832 like this.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, Trac-Vac 854 (for sale) and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  11. Top | #9
    Fit Rite Hydraulics MtnViewRanch's Avatar
    Join Date
    Nov 2012
    Last Online
    Today @ 08:02 PM
    Location
    Southern California
    Posts
    617
    Thanks
    87
    Thanked 122 Times in 98 Posts
    Quote Originally Posted by Sleepy View Post
    Curious. What would you have plumbed into the rear remotes that you would need in float mode? And does it put both remotes in float?
    Hydraulic side link.

    Snow removal implements.

    Rear grading implements for smoothing purposes only.

    Landscape rake.

    Probably more, these are just the first that come to mind.
    PJR832 likes this.
    Brian

    Manufacturer of Fit Rite Hydraulics

  12. Top | #10
    Sleepy's Avatar
    Join Date
    Aug 2017
    Last Online
    02-06-2019 @ 05:50 PM
    Location
    Decatur,TN
    Posts
    234
    Thanks
    0
    Thanked 28 Times in 21 Posts
    I guess I just don't understand. How does a landscape take hook up? Doesn't it just mount on the 3ph? A hydraulic rear blade in float would allow it to turn whichever way it wanted, is that right?
    ,Sleepy- "Living the dream!" -- 2017 2032R w/ loader and backhoe; JD Z930M 60"

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •