Fit Rite Hydraulic top link question
Results 1 to 6 of 6
Like Tree14Likes
  • 6 Post By Herminator
  • 4 Post By dieselshadow
  • 4 Post By MtnViewRanch

Thread: Fit Rite Hydraulic top link question

  1. Top | #1

    Join Date
    Aug 2016
    Last Online
    09-03-2018 @ 03:07 PM
    Location
    WI Wisconsin
    Posts
    17
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Fit Rite Hydraulic top link question

    I have a 4052R with I-Match.....looking to order a Fit Rite top link.....What length stroke should I get? Anybody will this same set-up have any expierience? Thanks...

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Herminator's Avatar
    Join Date
    Mar 2017
    Last Online
    07-14-2019 @ 11:58 PM
    Location
    Northern Illinois
    Posts
    3,623
    Thanks
    1,579
    Thanked 760 Times in 578 Posts
    Quote Originally Posted by supercub View Post
    I have a 4052R with I-Match.....looking to order a Fit Rite top link.....What length stroke should I get? Anybody will this same set-up have any expierience? Thanks...
    Brian will probably know what length you need, otherwise thread your stock top link in all the the way and out all the way and that should give you a good idea.
    Welcome to Intermission.

    2017 2038R, 400, 3020 & HPX and thingies to hook to the them.
    112 - Sold in July 2017 but took me until November to admit I just cast it out into this cruel world.
    #compactfarmer

  4. Top | #3
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Yesterday @ 08:40 PM
    Location
    Joelton TN
    Posts
    19,504
    Thanks
    1,048
    Thanked 4,151 Times in 2,519 Posts
    Yup, Brian will already know what you need. So unless you need something custom, you should be all set. Measure your top link fully retracted, hole center to hole center, and fully extended just to have those numbers when you call Brian.
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    Fit Rite Hydraulics MtnViewRanch's Avatar
    Join Date
    Nov 2012
    Last Online
    Yesterday @ 08:27 AM
    Location
    Southern California
    Posts
    616
    Thanks
    87
    Thanked 121 Times in 97 Posts
    A 19 1/4"- 27 1/4" working length is what I typically provide for your model. So when attached to your implement the pin-pin distance would be 23 1/2"-24".

    In reality it is always best to have the measurement asked for in this link.
    Brian

    Manufacturer of Fit Rite Hydraulics

  7. Top | #5
    ddinham's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 12:03 AM
    Location
    Eastern Kansas
    Posts
    3,373
    Thanks
    166
    Thanked 472 Times in 357 Posts
    Quote Originally Posted by supercub View Post
    I have a 4052R with I-Match.....looking to order a Fit Rite top link.....What length stroke should I get? Anybody will this same set-up have any expierience? Thanks...

    Brian at Fit Rite can take care of you. He has experience with the 4 series as he provided one for me on my 4066R.

    Dave

    Here is a pic on my 4066R using iMatch.

    Click image for larger version. 

Name:	IMAG0240.jpg 
Views:	23 
Size:	73.4 KB 
ID:	596946
    Last edited by ddinham; 04-22-2018 at 10:27 AM.
    JD 4066R CAB
    JD H180 FEL with SSQA brackets, JD iMatch, JD Ballast Box & ext, JD pull behind seed spreader
    Frontier RB2196H 8 ft rear blade/hyd angle, Frontier BB1065 Box Blade, Befco 3pt 110 inch RFM
    48" pallet forks, KK 3pt Boom Pole, Northern Tool 3pt middle buster, 2 bottom Dearborn plow
    County Line post hole digger, Rhino 3pt 10ft brush hog, Land Pride 8ft rock rake
    Fit Rite Hydraulics 3pt Top Link, front 3pt adapter for SSQA, 7 1/2 ft Field Roller, 8ft Dearborn tandem disk

  8. Top | #6

    Join Date
    Aug 2017
    Last Online
    07-30-2018 @ 08:19 AM
    Location
    North Dakota
    Posts
    44
    Thanks
    0
    Thanked 2 Times in 2 Posts
    I have a top link from Brian. It’s great but now I put longer lower arms on my 3 point for more lift Travel. Now my top link is a little short on travel.

  9. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •