Wiring for a WR Long valve
Results 1 to 6 of 6
Like Tree4Likes
  • 1 Post By Ray_PA
  • 2 Post By 69project
  • 1 Post By hokieyell

Thread: Wiring for a WR Long valve

  1. Top | #1

    Join Date
    Jun 2017
    Last Online
    05-10-2019 @ 09:11 AM
    Location
    NC
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Wiring for a WR Long valve

    How and where do you run the power supply? Photos will help.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Ray_PA's Avatar
    Join Date
    Dec 2013
    Last Online
    Yesterday @ 04:01 PM
    Location
    North of Harrisburg, PA
    Posts
    1,843
    Thanks
    138
    Thanked 530 Times in 318 Posts
    Quote Originally Posted by Pointy View Post
    How and where do you run the power supply? Photos will help.
    Your tractor model will help with replies.
    Jim Timber likes this.
    JD 1025 TLB (2013) ** 60D 7 Iron MMM w/auto-connect ** H120 FEL** 260 BH ** 54" snowblower ** 54" blade ** 52" Front Broom ** Ken's Bolt on Hooks ** Frontier BB2048L box scraper ** County Line 5' landscape rake ** JD Hydraulic Dump MCS ** Artillian Forks w/36" Forks ** JD 3 - Point Ballast Box ** JD I-Match Quick Hitch ** Heavy Hitch front Weight Bar ** Heavy Hitch 3 Point Weight Bar ** Fimco 40 Gallon Sprayer ** EA Aerator ** FitRite Hydraulics Rear SCV ** 12 - 40# suitcase weights

  4. Top | #3

    Join Date
    Jun 2017
    Last Online
    05-10-2019 @ 09:11 AM
    Location
    NC
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    3025 e

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Dec 2015
    Last Online
    Yesterday @ 04:50 AM
    Location
    North Carolina
    Posts
    1,252
    Thanks
    71
    Thanked 172 Times in 159 Posts
    My wiring harness taps in by the firewall. My dealer did it for me so I am not sure where they tapped in. I will try and get a picture to post up. I know when I did the diverter valve on my 2210, I tapped into the ignition switch wiring.
    3025e, D160 loader, Artillian Grapple, Forks, Hoe Bucket, Frontier Land Plane, Rotomec PDH300, Redline Systems 54 inch rock bucket, Heavy Hitch
    400 Garden Tractor, 35a Tiller, 54 inch plow, 60 inch deck

  7. Top | #5

    Join Date
    Dec 2015
    Last Online
    Yesterday @ 04:50 AM
    Location
    North Carolina
    Posts
    1,252
    Thanks
    71
    Thanked 172 Times in 159 Posts
    Here is a photo of mine. It goes to a harness on the right side of the engine by the firewall. It looks like it's factory so maybe there is a spare plug/connection there pre-wired by JD. Hard to say because the dealer did it as part of the set up when I bought the tractor last year. If all else fails, call WR Long, they should have an idea on where it needs to go.
    Attached Thumbnails Attached Thumbnails 3rd function wiring.jpg  
    Drifterbike and johncanfield like this.
    3025e, D160 loader, Artillian Grapple, Forks, Hoe Bucket, Frontier Land Plane, Rotomec PDH300, Redline Systems 54 inch rock bucket, Heavy Hitch
    400 Garden Tractor, 35a Tiller, 54 inch plow, 60 inch deck

  8. Top | #6

    Join Date
    Nov 2017
    Last Online
    06-07-2019 @ 08:20 PM
    Location
    Virginia
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    You may have already done this project since you asked several weeks ago, but I just ran the power lead to the battery and used the inline fuse holder and wire loom that WR Long provided in the kit. I have a WirthCo Battery Doctor Triple Tap that makes it easy to add small electrical accessories that you want to be always "on." I am not too worried about running the battery down this way, as pressing the switch for the grapple without the tractor being on won't be fun for long.
    69project likes this.
    2016 3032e - D160 loader - JD rear dual SCV kit - 50" EA Wicked Root Grapple - WR Long 3rd Function kit - JD iMatch - Tuff Top canopy
    6' Rhino rear blade - 6' Tarter landscape rake - DR PTO Chipper - 3PH sprayer - Ken's Bolt on Hook/Clevis combo

  9. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •