Adding Another SCV to a 3046r
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15
Like Tree8Likes

Thread: Adding Another SCV to a 3046r

  1. Top | #1

    Join Date
    Mar 2017
    Last Online
    07-06-2019 @ 04:31 PM
    Location
    ME
    Posts
    59
    Thanks
    37
    Thanked 9 Times in 8 Posts

    Adding Another SCV to a 3046r

    I have a 3046r that is currently equipped with SUV’s for the loader as well as an additional SCV operated by the thumb switch on the loser joystick. The tractor also has the power beyond plumbing for a backhoe or other implement.

    I’d like to understand my options for adding another SCV. I see a vacant position for a lever near the PTO selector and 3pt control and assume it is intended for a lever.

    The intent is to allow for top & tilt to be controlled separately without affecting the loader.

    Thanks,
    Toby


    Sent from my iPhone using Tapatalk Pro

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    mcavvie's Avatar
    Join Date
    Mar 2016
    Last Online
    Yesterday @ 08:45 PM
    Location
    New Brunswick, Canada
    Posts
    202
    Thanks
    2
    Thanked 13 Times in 13 Posts
    I just received a 3039r, along with the single scv at rear controlled by the loader lever mounted switch, I have 4 more ports that are controlled by a diverter valve in the loader circuit, to use them, flip a switch and use the loader control. Mine is the cab model, if yours is open station, then you can get dual rear with independent control.
    toby.jutras likes this.
    2018 3039r, 320r loader, 6’ bush cutter, box blade, landscape rake, forks,54” HLA grapple , ripper bar, pto driven dump trailer, pto cordwood saw. 1985 Bolens 1900 Eliminator, 1977 Sears 16/6 (restored) , and various attachments for all tractors, 2006 Komatsu PC18 MR2 Mini excavator. Woodmizer LT15 bandsaw mill

  4. The Following User Says Thank You to mcavvie For This Useful Post:

    toby.jutras (09-11-2018)

  5. Top | #3
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Yesterday @ 08:18 PM
    Location
    Westminster, MD
    Posts
    15,883
    Thanks
    4,798
    Thanked 3,806 Times in 2,414 Posts
    Toby, cab or open station machine?
    toby.jutras likes this.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, Trac-Vac 854 (for sale) and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  6. The Following User Says Thank You to Kennyd For This Useful Post:

    toby.jutras (09-11-2018)

  7. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  8. Top | #4

    Join Date
    Mar 2017
    Last Online
    07-06-2019 @ 04:31 PM
    Location
    ME
    Posts
    59
    Thanks
    37
    Thanked 9 Times in 8 Posts
    It has a cab.


    Sent from my iPhone using Tapatalk Pro

  9. Top | #5

    Join Date
    Mar 2017
    Last Online
    07-06-2019 @ 04:31 PM
    Location
    ME
    Posts
    59
    Thanks
    37
    Thanked 9 Times in 8 Posts
    Quote Originally Posted by Kennyd View Post
    Toby, cab or open station machine?
    Kennyd, it has a cab. Any ideas?

    Thanks,
    Toby


    Sent from my iPhone using Tapatalk Pro

  10. The Following User Says Thank You to toby.jutras For This Useful Post:

    mcavvie (09-16-2018)

  11. Top | #6
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Yesterday @ 08:18 PM
    Location
    Westminster, MD
    Posts
    15,883
    Thanks
    4,798
    Thanked 3,806 Times in 2,414 Posts
    Toby,
    Sorry I missed your previous reply.
    There is only one option from JD, that is the 4th/5th diverter kit that redirected the two loader ports to the rear. There is no mechanical option that uses the slot your seeing.

    We are working on a diverter setup now for the 3x20 series to "split" the one rear remote into two. This will allow a full TnT setup, or a HTL and Grapple without disconnecting any hoses There will have to be some minor changes to the kit to be able to work on the newer 3r family, I hope to get to that in the next few weeks.

    Here is the setup on my 3720:




    Attached Thumbnails Attached Thumbnails IMG_6610.jpg   IMG_6708.jpg  
    mark02tj and toby.jutras like this.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, Trac-Vac 854 (for sale) and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  12. The Following User Says Thank You to Kennyd For This Useful Post:

    toby.jutras (09-17-2018)

  13. Top | #7
    mcavvie's Avatar
    Join Date
    Mar 2016
    Last Online
    Yesterday @ 08:45 PM
    Location
    New Brunswick, Canada
    Posts
    202
    Thanks
    2
    Thanked 13 Times in 13 Posts
    On an open station 3 series , you can get independent 4th and 5th rear scv’s, on the cab model, you can’t. On the cab model it is a electric diverter kit that uses a switch on the console to activate, then use the loader control to operate the scv’s. the part number for kit is BLV10649.
    Kennyd and toby.jutras like this.
    2018 3039r, 320r loader, 6’ bush cutter, box blade, landscape rake, forks,54” HLA grapple , ripper bar, pto driven dump trailer, pto cordwood saw. 1985 Bolens 1900 Eliminator, 1977 Sears 16/6 (restored) , and various attachments for all tractors, 2006 Komatsu PC18 MR2 Mini excavator. Woodmizer LT15 bandsaw mill

  14. The Following User Says Thank You to mcavvie For This Useful Post:

    toby.jutras (09-17-2018)

  15. Top | #8
    mcavvie's Avatar
    Join Date
    Mar 2016
    Last Online
    Yesterday @ 08:45 PM
    Location
    New Brunswick, Canada
    Posts
    202
    Thanks
    2
    Thanked 13 Times in 13 Posts
    Here are pics of how mine is set up. I don’t have PBY.
    Attached Thumbnails Attached Thumbnails 06E160FE-E163-4954-B0CE-F56791DB396A.jpeg   29747588-33C6-4D06-ACE2-A35E10B7B112.jpeg   2FC119C7-0056-465A-A820-A05DAB467BE0.jpeg  
    2018 3039r, 320r loader, 6’ bush cutter, box blade, landscape rake, forks,54” HLA grapple , ripper bar, pto driven dump trailer, pto cordwood saw. 1985 Bolens 1900 Eliminator, 1977 Sears 16/6 (restored) , and various attachments for all tractors, 2006 Komatsu PC18 MR2 Mini excavator. Woodmizer LT15 bandsaw mill

  16. Top | #9
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Yesterday @ 08:18 PM
    Location
    Westminster, MD
    Posts
    15,883
    Thanks
    4,798
    Thanked 3,806 Times in 2,414 Posts
    Boy that diverter and hardlines look vulnerable under there!
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, Trac-Vac 854 (for sale) and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  17. Top | #10
    mcavvie's Avatar
    Join Date
    Mar 2016
    Last Online
    Yesterday @ 08:45 PM
    Location
    New Brunswick, Canada
    Posts
    202
    Thanks
    2
    Thanked 13 Times in 13 Posts
    Yup, thought maybe jd could’ve found a better spot.
    2018 3039r, 320r loader, 6’ bush cutter, box blade, landscape rake, forks,54” HLA grapple , ripper bar, pto driven dump trailer, pto cordwood saw. 1985 Bolens 1900 Eliminator, 1977 Sears 16/6 (restored) , and various attachments for all tractors, 2006 Komatsu PC18 MR2 Mini excavator. Woodmizer LT15 bandsaw mill

  18. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •