6030 3 point
Results 1 to 7 of 7
Like Tree4Likes
  • 1 Post By kidscreations
  • 2 Post By Herminator
  • 1 Post By Tx Jim

Thread: 6030 3 point

  1. Top | #1

    Join Date
    Feb 2019
    Last Online
    02-26-2019 @ 08:26 AM
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    6030 3 point

    I have just bought a restored 6030. After it sits for a while the 3 point bleeds down. When I start it up the 3 points raises to the full lifted position. My problem is I can't raise and lower. Is there a flow control or something I am missing?
    Attached Thumbnails Attached Thumbnails Image-0243.jpg  
    keane likes this.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Herminator's Avatar
    Join Date
    Mar 2017
    Last Online
    07-14-2019 @ 11:58 PM
    Location
    Northern Illinois
    Posts
    3,623
    Thanks
    1,579
    Thanked 760 Times in 578 Posts
    I am not going to be much help however that is a beautiful tractor.

    If it raises and lowers even if it is lowers because of bleeding down mechanically it is working. That is good.

    After it bleeds down, if you put the 3point control lever in the down position will it still raise up when you start it?

    Have you talked to the restorer about this?
    Last edited by Herminator; 02-25-2019 at 04:15 PM.
    DRobinson and trboxman like this.
    Welcome to Intermission.

    2017 2038R, 400, 3020 & HPX and thingies to hook to the them.
    112 - Sold in July 2017 but took me until November to admit I just cast it out into this cruel world.
    #compactfarmer

  4. Top | #3

    Join Date
    Oct 2014
    Last Online
    Yesterday @ 04:48 PM
    Location
    Coyote Flats,Texas
    Posts
    1,606
    Thanks
    15
    Thanked 272 Times in 244 Posts
    Welcome to GTT
    I agree you have a very nice tractor. Have you tried relocating position of L/D lever under the seat?

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Feb 2019
    Last Online
    02-26-2019 @ 08:26 AM
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Tx Jim View Post
    Welcome to GTT
    I agree you have a very nice tractor. Have you tried relocating position of L/D lever under the seat?
    Yes I did

  7. Top | #5

    Join Date
    Oct 2014
    Last Online
    Yesterday @ 04:48 PM
    Location
    Coyote Flats,Texas
    Posts
    1,606
    Thanks
    15
    Thanked 272 Times in 244 Posts
    Although my knowledge of 6030's is limited I will guess that 6030 tech manual has a section of several steps outlined to adjust L/D control mechanism similar to other JD rowcrop tractors of same era. If I'm correct I'll suggest to perform these adjustments to L/D mechanisms.
    DRobinson likes this.

  8. Top | #6
    fdmars's Avatar
    Join Date
    Feb 2011
    Last Online
    Yesterday @ 06:24 PM
    Location
    Mid CT
    Posts
    2,044
    Thanks
    150
    Thanked 186 Times in 147 Posts
    No idea on 3 pt, but that tractor is drop dead gorgeous
    More pics please
    2009 JD 2305 w/ Femco folding ROPS,Power Beyond Kit, KBOH, 54"MMM, 47" Snowblower, 200CX Loader w/ BB, Powerhorse 12 ton Logsplitter and King Kutter tool carrier and 17P kart
    2009 Cub Cadet/Yanmar ex3200, Land Pride 60” land plane and 60” finish mower, worksaver posthole digger w/ 9” auger, “The thumb” add on grapple, third function valve and KBOH of course

  9. Top | #7
    flyweight's Avatar
    Join Date
    Jun 2014
    Last Online
    07-14-2019 @ 02:22 PM
    Location
    Louisiana, (the Tropics of)
    Posts
    9,226
    Thanks
    784
    Thanked 1,702 Times in 1,169 Posts
    Among other items previously mentioned, check that the levers(#11 and 2) are actually moving when you move the rockshaft lever(#15) back and forth.
    Make certain the pins(#3, 7 and 10) are not missing or damaged.

    Michael

    '84 JD 750
    '08 JD Z445
    '71 JD 15 Chainsaw
    And a bunch of other stuff.


    " If there's no one around to smell me, do I really stink"?
    - John Wells - Brewster County, West Texas.










  10. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Similar Threads

  1. 2038R/2032R hydraulic Mod, Loader Single Point/Front 3 Point Hitch
    By HomesteadJoe in forum Medium Frame Compact Utility Tractors (MCUT)
    Replies: 0
    Last Post: 12-04-2018, 12:41 PM
  2. Replies: 4
    Last Post: 03-11-2014, 10:59 AM
  3. John deere 6030 with sound guard cab please help!!!
    By rmpruitt97 in forum Agricultural Tractors
    Replies: 0
    Last Post: 03-02-2014, 04:10 PM
  4. 6030 with SoundGuard Cab
    By neeltburn in forum Agricultural Tractors
    Replies: 1
    Last Post: 03-19-2012, 02:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •