I picked up a take off Artillian diverter kit from a member here and Iím trying to get it installed on my FILís 2004 4610 with 460 loader so he can run one of my Artillian grapple units. The kit originally came off a G1 2032r and H130 loader so I know down the loader where the QDís for the grapple end up will be short- but laying them out roughly this weekend they seem like theyíd work.
Either way I have a hydraulic issue to solve prior to getting to that point-his loader line QDís are larger than the ones on a 2 series and the diverter. Taking one of the lines apart I think I have nailed down the adapter Iíll need but I thought Iíd try to confirm here. Iím going to re use his QD, the rubber line that goes between it and his hard line, which is one that will be replaced with two shorter ones and the diverter valve is pictured below along with the QD. I removed the angled fitting and the smaller QD from the line in the kit, itís fitting is pictured also. It appears to me that the tractor line and QD are -08 ORB and the diverter line fitting is -06 JIC so the adapter would be as pictured, a -08M ORB to -06M JIC-does this appear correct?
Now for the electrical power connection, anybody know how to tap the fuse panel in a 4610 for an extra key hot source to power this thing?