Can you install a 4th/5th SCV on 2010 3520 that has PB and 3rd SCV??
Results 1 to 5 of 5

Thread: Can you install a 4th/5th SCV on 2010 3520 that has PB and 3rd SCV??

  1. Top | #1
    Jdeere3320@'s Avatar
    Join Date
    Sep 2019
    Last Online
    Today @ 11:53 AM
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Can you install a 4th/5th SCV on 2010 3520 that has PB and 3rd SCV??

    I just picked up a minty 3520 that came with PB and 3rd scv for the mower deck. I installed the 4/5th scv and now that I’m ready to hook the lines up I notice that where they need to go the PB lines are already there??

    The kit the dealer sold me was part number BLV10761 and my vin is LV3520H612267. Everything else fit right and lines look right but with the PB lines in the way trying to figure out if I just have to remove the PB or is their another fit Kit I need to buy or should I or can I use the PB to supply the 4/5th scv with quick connects so I don’t have to remove it?

    Any help or ideas would be great . Also if you have one with all 3 please post me some pics. Thanks Mark
    Attached Thumbnails Attached Thumbnails 1E07755B-DD1B-4459-8E6D-3C005F922E6D.jpeg D5FFF3AF-B5D5-45C4-A370-3AB62530B446.jpeg 0EFFB508-EF14-49FD-B30C-2D4EBE20553F.jpeg
    Last edited by [email protected]; Yesterday at 04:04 PM.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Dec 2014
    Last Online
    Yesterday @ 07:27 PM
    Location
    MD
    Posts
    210
    Thanks
    48
    Thanked 65 Times in 40 Posts

    Apparently yes - if you work at it.

    I suspect the answer is yes, if one is willing to do some work.

    https://www.greentractortalk.com/for...ml#post3333962
    John Deere 4200, 420 FEL, 60" MMM, #74 Front Blade, #59 Snowblower, iMatch, Hydraulic Dump MCS

  4. Top | #3
    Jdeere3320@'s Avatar
    Join Date
    Sep 2019
    Last Online
    Today @ 11:53 AM
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Well no one at JD could tell me anything which was no surprise so I removed the PB guess I値l just sell it since I don稚 have to have it.

    Went to finish installing it just to find out the large line that runs under seat area on RH side is not right in the kit and is for a later model since my brothers 3033r is the exact same line. John Deere parts people have done gone to ****. Anyone happen to know the line part number for the earlier models? Or kit number so maybe they can figure out what line I need? If not I値l just have a Hyd hose made and move on.

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    arlen's Avatar
    Join Date
    Apr 2012
    Last Online
    Today @ 06:48 AM
    Location
    South East Minnesota
    Posts
    3,131
    Thanks
    332
    Thanked 413 Times in 312 Posts
    Quote Originally Posted by [email protected] View Post
    Well no one at JD could tell me anything which was no surprise so I removed the PB guess I値l just sell it since I don稚 have to have it.

    Went to finish installing it just to find out the large line that runs under seat area on RH side is not right in the kit and is for a later model since my brothers 3033r is the exact same line. John Deere parts people have done gone to ****. Anyone happen to know the line part number for the earlier models? Or kit number so maybe they can figure out what line I need? If not I値l just have a Hyd hose made and move on.
    Maybe try here in the GTT technical Library
    4720 66hp Open Station, Power Beyond, 3rd, 4th and 5th Rear SCV, iMatch, 400cx with SSQA, 3rd Loader Function, MX6, BoDozer Grapple
    JD 320D Skid Loader
    Gator 865r...Fully Pimped Out

    X748SE 24hp, 647 Tiller, 54" front blade, 47 Snow Blower, 62C deck, JD disk

    JD 997 Zero Turn

    Farmall B

    2 miniature donkeys, 1/8 hp (each)

  7. The Following User Says Thank You to arlen For This Useful Post:

    mark02tj(Today)

  8. Top | #5
    Jdeere3320@'s Avatar
    Join Date
    Sep 2019
    Last Online
    Today @ 11:53 AM
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thanks for the Video, told me what I needed. I知 going to run three lines from the PB with quick couplers and leave the rest the way it was. I値l let the PB power the 4th & 5th SCV and then if I need the PB I can just unhook the couplers and use it . I値l post some pics once I have it finished.

  9. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts