3rd function valve on 3038e JD with 305 loader
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 21

Thread: 3rd function valve on 3038e JD with 305 loader

  1. Top | #1

    Join Date
    Nov 2011
    Last Online
    01-22-2012 @ 03:45 PM
    Location
    rome ga & perry fl
    Posts
    13
    Thanks
    2
    Thanked 0 Times in 0 Posts

    Question 3rd function valve on 3038e JD with 305 loader

    Does anyone know what type and size solenoid valve I should use to instal a 3rd function valve on a JD 3038e with a 305 fel. THANKS

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 06:35 AM
    Location
    Westminster, MD
    Posts
    16,082
    Thanks
    4,917
    Thanked 3,964 Times in 2,476 Posts
    I can answer, but are you wanting a "diverter" type or the true 3rd Function type that would tie into the PB lines?

    Here is the answer to both:

    Diverter type: https://www.surpluscenter.com/item.a...name=hydraulic

    3rd Function type: https://www.surpluscenter.com/item.a...name=hydraulic and note you will also need 2 of the connectors and a subplate.

    Acually, the Surplus Center website is down so I will answer later with links.

    PS: I also moved this to the Hydraulics Forum.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, Trac-Vac 854 (for sale) and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  4. Top | #3
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 06:35 AM
    Location
    Westminster, MD
    Posts
    16,082
    Thanks
    4,917
    Thanked 3,964 Times in 2,476 Posts
    Post above updated.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, Trac-Vac 854 (for sale) and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    jfoi's Avatar
    Join Date
    Sep 2010
    Last Online
    07-01-2013 @ 10:15 PM
    Location
    PA
    Posts
    280
    Thanks
    12
    Thanked 20 Times in 15 Posts
    not trying to tell you what to do, if i were you i would just get the stock 3rd function from deere. it will be rated to the machines specs, it will look stock, and there wont be any guess work on materials
    John Deere x320
    48" xtra cutting system
    44" front blade w/ angle kit

    John Deere 455
    60" commercial deck
    54" plow

    John Deere 4720
    400CX Loader
    Frontier Loader Mounted Snow Plow
    12.5 FT Frontier Hitch Mounted Finish Mower

    John Deere 332D Skidsteer

    Mowers Only: John Deere 1545, John Deere Z925A MOD

    Work Horses:625I Gator, Gator 855D
    With the gatorpal pressure washer, and Powertach snowblade, poly roof/ windshield

  7. Top | #5
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 06:35 AM
    Location
    Westminster, MD
    Posts
    16,082
    Thanks
    4,917
    Thanked 3,964 Times in 2,476 Posts
    Quote Originally Posted by jfoi View Post
    not trying to tell you what to do, if i were you i would just get the stock 3rd function from deere. it will be rated to the machines specs, it will look stock, and there wont be any guess work on materials
    They only offer the dual rear remote kit correct? I though they only offered the 3rd function on the FEL's for the newer 3x20 and 4x20's with the electro-hydraulic controls?
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, Trac-Vac 854 (for sale) and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  8. Top | #6
    jfoi's Avatar
    Join Date
    Sep 2010
    Last Online
    07-01-2013 @ 10:15 PM
    Location
    PA
    Posts
    280
    Thanks
    12
    Thanked 20 Times in 15 Posts
    ya i think your right. atleast to get the rear remotes from deere, then make hoses from the rear to the loader for the 3rd line
    John Deere x320
    48" xtra cutting system
    44" front blade w/ angle kit

    John Deere 455
    60" commercial deck
    54" plow

    John Deere 4720
    400CX Loader
    Frontier Loader Mounted Snow Plow
    12.5 FT Frontier Hitch Mounted Finish Mower

    John Deere 332D Skidsteer

    Mowers Only: John Deere 1545, John Deere Z925A MOD

    Work Horses:625I Gator, Gator 855D
    With the gatorpal pressure washer, and Powertach snowblade, poly roof/ windshield

  9. Top | #7

    Join Date
    Nov 2011
    Last Online
    01-22-2012 @ 03:45 PM
    Location
    rome ga & perry fl
    Posts
    13
    Thanks
    2
    Thanked 0 Times in 0 Posts

    3rd Function

    Hi Ken
    I tried to send you a couple of private messages, however when I tried to send them, the system said I was not logged in both times. Was I doing something wrong? I have been on the road for a couple of days and did not see where the post had been moved to the Hydraulics section.
    Thanks, Rick

  10. Top | #8
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 06:35 AM
    Location
    Westminster, MD
    Posts
    16,082
    Thanks
    4,917
    Thanked 3,964 Times in 2,476 Posts
    Quote Originally Posted by rick causey View Post
    Hi Ken
    I tried to send you a couple of private messages, however when I tried to send them, the system said I was not logged in both times. Was I doing something wrong? I have been on the road for a couple of days and did not see where the post had been moved to the Hydraulics section.
    Thanks, Rick
    Make sure you are clicking the "remember me" button under where you enter you username-it's kind of hidden and easily overlooked.

    You are certainly welcome to PM me anytime...but posting the questions here can help others as well
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, Trac-Vac 854 (for sale) and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  11. Top | #9

    Join Date
    Nov 2011
    Last Online
    01-22-2012 @ 03:45 PM
    Location
    rome ga & perry fl
    Posts
    13
    Thanks
    2
    Thanked 0 Times in 0 Posts

    3rd Function

    Thanks Kenny for the info on the solenoid valve. Could you tell me which plate and connectors I will need if I do this thing myself? I have ordered the TM for my tractor, when it gets here I will decide weather to get a kit or buy the parts myself. thanks

  12. Top | #10
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 06:35 AM
    Location
    Westminster, MD
    Posts
    16,082
    Thanks
    4,917
    Thanked 3,964 Times in 2,476 Posts
    Quote Originally Posted by rick causey View Post
    Thanks Kenny for the info on the solenoid valve. Could you tell me which plate and connectors I will need if I do this thing myself? I have ordered the TM for my tractor, when it gets here I will decide weather to get a kit or buy the parts myself. thanks
    The plates and connectors are listed on the right side of the SC page, but here are direct links:

    https://www.surpluscenter.com/item.a...c&item=11-2457

    and

    https://www.surpluscenter.com/item.a...&item=9-5883-1
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, Trac-Vac 854 (for sale) and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Replies: 21
    Last Post: 10-25-2018, 02:19 PM
  2. 3rd Hyd Control Valve for 2520
    By Ronster in forum Hydraulics
    Replies: 33
    Last Post: 04-30-2012, 06:51 AM
  3. Electric over hydralic third function valve.
    By has15 in forum Hydraulics
    Replies: 10
    Last Post: 02-02-2012, 05:02 AM
  4. 3038e hydraulics
    By rick causey in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 7
    Last Post: 11-25-2011, 08:12 AM
  5. Replies: 0
    Last Post: 04-25-2011, 06:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •