Anyone know what these are used for?
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
Like Tree4Likes

Thread: Anyone know what these are used for?

  1. Top | #1
    ddinham's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 10:53 PM
    Location
    Eastern Kansas
    Posts
    3,653
    Thanks
    167
    Thanked 503 Times in 386 Posts

    Anyone know what these are used for?

    These came with a H120 loader kit, but are not shown in the installation manual.

    Dave

    Click image for larger version. 

Name:	IMAG0168.jpg 
Views:	40 
Size:	1.42 MB 
ID:	24072
    JD 4066R CAB
    JD H180 FEL with SSQA brackets, JD iMatch, JD Ballast Box & ext, JD pull behind seed spreader
    Frontier RB2196H 8 ft rear blade/hyd angle, Frontier BB1065 Box Blade, Befco 3pt 110 inch RFM
    48" pallet forks, KK 3pt Boom Pole, Northern Tool 3pt middle buster, 2 bottom Dearborn plow
    County Line post hole digger, Rhino 3pt 10ft brush hog, Land Pride 8ft rock rake
    Fit Rite Hydraulics 3pt Top Link, front 3pt adapter for SSQA, 7 1/2 ft Field Roller, 8ft Dearborn tandem disk

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    56FordGuy's Avatar
    Join Date
    Jan 2012
    Last Online
    Yesterday @ 08:00 PM
    Location
    Wyoming
    Posts
    10,043
    Thanks
    482
    Thanked 1,662 Times in 1,091 Posts
    Depending on what version of the parking stand you have, those may go on the bottom as 'feet' when you remove the loader.
    Gizmo2 and Sawdust like this.
    -Blake

    Your mileage may vary.

    JD 6410
    Some other stuff

    YouTube- Life in Wyoming

  4. Top | #3
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Today @ 10:11 PM
    Location
    Joelton TN
    Posts
    19,996
    Thanks
    1,069
    Thanked 4,342 Times in 2,611 Posts
    ^^^^^^^^^^^What he said^^^^^^^^^^^^^

    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

    Quote Originally Posted by Gizmo2 View Post
    Dieselshadow is my Hero.


  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Aug 2013
    Last Online
    Yesterday @ 10:08 PM
    Location
    Cartersville (NW) GA
    Posts
    2,391
    Thanks
    103
    Thanked 365 Times in 267 Posts
    I like those feet. Will need to find the Deere part number and order a set.
    1025r TLB w 60D MMM & Independent Lift
    SN 114287 Built April '13 received 8/21/13
    180 degree thermostat
    Omni Transformer w/ integrated weight bracket
    Single Point
    Ken's Bolt on hooks
    Artillian Forks (42")
    Full Compliment of Wheel Weights (340lbs)
    Custom Seat Springs

    Kubota 326H 72" deck ZTR

    Stihl MS361, FS250R

  7. Top | #5

    Join Date
    May 2011
    Last Online
    04-27-2014 @ 12:38 AM
    Location
    Frozen Tundra Alberta
    Posts
    43
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Could they be for shipping a loader and the dealer forgot to remove em? or forgot to toss em away?
    JD hmm its all Jd..
    Dads original 112 mower and tiller, 317 mower, tiller, 4way snow blade snow blower,, 6300 mfwd open station power reverser, Grand fathers four bottom IHC plow , Grand fathers JD hay rake, (rake and plow from the 40's) , designing my yard packer and yard roller

  8. Top | #6
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Today @ 10:11 PM
    Location
    Joelton TN
    Posts
    19,996
    Thanks
    1,069
    Thanked 4,342 Times in 2,611 Posts
    Quote Originally Posted by Team_Green View Post
    Could they be for shipping a loader and the dealer forgot to remove em? or forgot to toss em away?
    No. They were a interim stand "fix". There was several flavors of loader stands and the second generation included these feet to prevent interference with the mower gearbox during mower installation. If you have the 3rd gen stand these feet are not needed.
    Gizmo2 likes this.
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

    Quote Originally Posted by Gizmo2 View Post
    Dieselshadow is my Hero.


  9. The Following User Says Thank You to dieselshadow For This Useful Post:

    ddinham (12-21-2013)

  10. Top | #7
    ddinham's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 10:53 PM
    Location
    Eastern Kansas
    Posts
    3,653
    Thanks
    167
    Thanked 503 Times in 386 Posts
    At first, I thought that maybe they were skids for under the back of the loader, but it was obvious that they would not work there as that would prevent the bucket from dumping. I had not thought about them possibly being used on the stand.

    Dave
    JD 4066R CAB
    JD H180 FEL with SSQA brackets, JD iMatch, JD Ballast Box & ext, JD pull behind seed spreader
    Frontier RB2196H 8 ft rear blade/hyd angle, Frontier BB1065 Box Blade, Befco 3pt 110 inch RFM
    48" pallet forks, KK 3pt Boom Pole, Northern Tool 3pt middle buster, 2 bottom Dearborn plow
    County Line post hole digger, Rhino 3pt 10ft brush hog, Land Pride 8ft rock rake
    Fit Rite Hydraulics 3pt Top Link, front 3pt adapter for SSQA, 7 1/2 ft Field Roller, 8ft Dearborn tandem disk

  11. Top | #8
    ddinham's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 10:53 PM
    Location
    Eastern Kansas
    Posts
    3,653
    Thanks
    167
    Thanked 503 Times in 386 Posts
    Quote Originally Posted by psrumors View Post
    I like those feet. Will need to find the Deere part number and order a set.

    You can have these as I have no need for them.

    Dave
    JD 4066R CAB
    JD H180 FEL with SSQA brackets, JD iMatch, JD Ballast Box & ext, JD pull behind seed spreader
    Frontier RB2196H 8 ft rear blade/hyd angle, Frontier BB1065 Box Blade, Befco 3pt 110 inch RFM
    48" pallet forks, KK 3pt Boom Pole, Northern Tool 3pt middle buster, 2 bottom Dearborn plow
    County Line post hole digger, Rhino 3pt 10ft brush hog, Land Pride 8ft rock rake
    Fit Rite Hydraulics 3pt Top Link, front 3pt adapter for SSQA, 7 1/2 ft Field Roller, 8ft Dearborn tandem disk

  12. Top | #9
    Vern1026R's Avatar
    Join Date
    Jun 2012
    Last Online
    Today @ 08:08 AM
    Location
    Livonia, Michigan (Metro Detroit)
    Posts
    584
    Thanks
    184
    Thanked 114 Times in 84 Posts
    As others have said they where added to the 2nd generation H120 parking stand only to help clear the MMM gear box, they should not be used on the 1st or 3rd gen parking stands. Being that the 3rd gen stand has a much different profile than the 2nd gen, the add on feet would not be flat to the ground if used.
    Attached Thumbnails Attached Thumbnails dscn1550.jpg  
    Gizmo2 likes this.
    Vern


    [COLOR="#008000"]2012 1026R w/loaded R3's, H120 FEL, Artillian forks, Ken's hooks, auto 54D mower deck, 54 front quick hitch blade
    Heavy Hitch front weight bracket, Omni Transformer hitch and subsoiler, 8-42lb. hang on weights, psrumors seat spring upgrade, Land Pride 54" box blade, Frontier LR2060 landscape rake, J.D. IMatch, Bxpanded tooth bar, backhoe thumb and quick change b/h bucket adapter, recently added 260 backhoe and gently used JD 647 tiller.

  13. The Following User Says Thank You to Vern1026R For This Useful Post:

    ddinham (12-21-2013)

  14. Top | #10
    ddinham's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 10:53 PM
    Location
    Eastern Kansas
    Posts
    3,653
    Thanks
    167
    Thanked 503 Times in 386 Posts
    I guess now the question is do I have a second generation stand. This is supposed to be a 2012 model H120. Does anyone know how to determine which generation this is???? It seems to work fine without the mower deck installed. I have no intention of using it without removing the mower deck.

    Dave
    JD 4066R CAB
    JD H180 FEL with SSQA brackets, JD iMatch, JD Ballast Box & ext, JD pull behind seed spreader
    Frontier RB2196H 8 ft rear blade/hyd angle, Frontier BB1065 Box Blade, Befco 3pt 110 inch RFM
    48" pallet forks, KK 3pt Boom Pole, Northern Tool 3pt middle buster, 2 bottom Dearborn plow
    County Line post hole digger, Rhino 3pt 10ft brush hog, Land Pride 8ft rock rake
    Fit Rite Hydraulics 3pt Top Link, front 3pt adapter for SSQA, 7 1/2 ft Field Roller, 8ft Dearborn tandem disk

  15. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •