Third party material collection system/bagger - help me out
Results 1 to 5 of 5

Thread: Third party material collection system/bagger - help me out

  1. Top | #1

    Join Date
    Jun 2013
    Last Online
    Yesterday @ 03:43 PM
    Location
    Upstate NY
    Posts
    191
    Thanks
    40
    Thanked 18 Times in 12 Posts

    Third party material collection system/bagger - help me out

    Hi guys, I saw a picture somewhere of a material collection system/bagger for a 1025R that essentially had a hydraulic dump - I believe it was the rear gate opened with hydraulics, it was a solid looking unit. It appeared that the gate opened on the back of the unit rather than on the bottom of the unit. I looked on protero's website, and also I am aware of the deere 14 and 20 MCS, and it was neither of those which appear to dump "down" with the gate on the bottom of the unit. I know it's also not cyclone rake. I recall it having a green paintjob if that helps

    Any thoughts? Was I dreaming?

    Those of us finishing up dead leaf season, how did the Deere 20 MCS with dump-from-the-seat treat you?

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    martincom's Avatar
    Join Date
    Jan 2017
    Last Online
    Today @ 10:47 AM
    Location
    Brainerd, MN
    Posts
    1,516
    Thanks
    18
    Thanked 290 Times in 220 Posts
    John Deere manufactures a hydraulic dump unit for the 1-series and LGTs. It has a separate engine for the blower. There has been a few posts about it, here on GTT. There was a used unit on Minneapolis Craig's List for quite awhile for $500, but I don't see it listed any longer.
    2017 1025R TLB & 2017 1025R FEL
    2*54 Mower Decks w/Independent Lift
    2*47 Snow Blowers
    2*Cozy Cab
    2*Heavy Hitch Receiver Hitch w/Dual Suitcase Weight Brackets, Storage Cart, & 1*Front Suitcase Weight Bracket
    50" Wicked Root Grapple
    Land Pride LR1560 Land Rake w/ wide gauge wheels & plow blade
    BXpanded Backhoe Dolly
    MCS20 Leaf/clippings hopper
    647 Tiller
    2001 455 AWS & 1999 455 AWS--Both Sold

  4. The Following User Says Thank You to martincom For This Useful Post:

    jermedic (12-07-2017)

  5. Top | #3

    Join Date
    Jun 2013
    Last Online
    Yesterday @ 03:43 PM
    Location
    Upstate NY
    Posts
    191
    Thanks
    40
    Thanked 18 Times in 12 Posts
    Quote Originally Posted by martincom View Post
    John Deere manufactures a hydraulic dump unit for the 1-series and LGTs. It has a separate engine for the blower. There has been a few posts about it, here on GTT. There was a used unit on Minneapolis Craig's List for quite awhile for $500, but I don't see it listed any longer.
    Thanks Martin how is your MCS20 with hydraulic dump treating you?

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4
    martincom's Avatar
    Join Date
    Jan 2017
    Last Online
    Today @ 10:47 AM
    Location
    Brainerd, MN
    Posts
    1,516
    Thanks
    18
    Thanked 290 Times in 220 Posts
    Quote Originally Posted by jermedic View Post
    Thanks Martin how is your MCS20 with hydraulic dump treating you?
    It works great! I've had an AgriFab Leaf Vac and MC519 w/power flow in the past. The MCS20 is the best yet.

    Also, it is not a hydraulic dump. It is an electric dump. A 12 volt linear actuator.
    2017 1025R TLB & 2017 1025R FEL
    2*54 Mower Decks w/Independent Lift
    2*47 Snow Blowers
    2*Cozy Cab
    2*Heavy Hitch Receiver Hitch w/Dual Suitcase Weight Brackets, Storage Cart, & 1*Front Suitcase Weight Bracket
    50" Wicked Root Grapple
    Land Pride LR1560 Land Rake w/ wide gauge wheels & plow blade
    BXpanded Backhoe Dolly
    MCS20 Leaf/clippings hopper
    647 Tiller
    2001 455 AWS & 1999 455 AWS--Both Sold

  8. Top | #5
    TJR345's Avatar
    Join Date
    Jan 2016
    Last Online
    Yesterday @ 02:34 PM
    Location
    Area 51 in Cambria,NY
    Posts
    3,791
    Thanks
    417
    Thanked 483 Times in 372 Posts
    Quote Originally Posted by jermedic View Post
    Hi guys, I saw a picture somewhere of a material collection system/bagger for a 1025R that essentially had a hydraulic dump - I believe it was the rear gate opened with hydraulics, it was a solid looking unit. It appeared that the gate opened on the back of the unit rather than on the bottom of the unit. I looked on protero's website, and also I am aware of the deere 14 and 20 MCS, and it was neither of those which appear to dump "down" with the gate on the bottom of the unit. I know it's also not cyclone rake. I recall it having a green paintjob if that helps

    Any thoughts? Was I dreaming?

    Those of us finishing up dead leaf season, how did the Deere 20 MCS with dump-from-the-seat treat you?
    No you're not dreaming,post 5 & 6.
    http://www.greentractortalk.com/foru...questions.html
    Tom

    2019 X590 with power mulch control and PF bagger
    30" mechanical tiller
    02 X595 with 62" deck,front thatcher and powerflow PTO kit
    3pt hitch with Heavy Hitch 45 JD loader
    12 JD suitcase weights
    JD/Brinly 3pt plow
    Frontier SS1036 3pt pto spreader
    (2) JS63C walk behind mowers
    TS 105 JD weed wacker
    tow behind 15 gal. sprayer
    Turftime 60" lawn roller
    Turftime 54" 3pt core aerator

  9. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •