Recommended Spare parts for 47 Snow Blower
Results 1 to 5 of 5
Like Tree5Likes
  • 1 Post By rw580
  • 2 Post By ColonyPark
  • 2 Post By jgayman

Thread: Recommended Spare parts for 47 Snow Blower

  1. Top | #1

    Join Date
    Sep 2017
    Last Online
    Yesterday @ 09:26 AM
    Front Royal, Va
    Thanked 137 Times in 59 Posts

    Recommended Spare parts for 47 Snow Blower

    Well, my new snow blower is in at the dealer and I plan on picking it up at the end of the week. It is the 47 inch model 7008M for my x580 tractor. My question is, what spare parts for this unit does anyone recommend I pick up while at the dealer? The goal is to not let any common breakdown interrupt snow clearing activities.

    Are there any shear pins or belts that commonly break with this unit?
    Herminator likes this.

    Stable includes:
    2017 x580, 54" deck with Mulcher, sleeve hitch, rear blade, box scraper, 47" Snowblower, rear mount electric spreader
    1980 IH Cub Cadet 682, 50" deck, rototiller, front blade (inherited from FIL, in middle of full restore)
    Other Toys:
    Stihl MS290 Farm Boss Chainsaw
    Stihl BG56 Blower
    Stihl KM 111 Kombisystem

  2. Remove Advertisements

  3. Top | #2
    Corndog Hater ColonyPark's Avatar
    Join Date
    Aug 2011
    Last Online
    Today @ 08:09 PM
    Thanked 1,158 Times in 983 Posts
    I have the shaft driven 47" blower, so I can't speak for all the parts. I always have several extra shear bolts on hand (my blower has a handy spot to hold (4) bolts right on it. I'm going into the 12th winter with this blower and I think I've only ever sheared 2 bolts. All my surfaces are asphalt or concrete though. I would also keep Fluid Film on hand to keep things moving smoothly. At the start of each season, I also spray the housing and impellers down with a couple good coats of silicone spray.
    Herminator and rw580 like this.

    2011 JD 1026R - w/60" NON-AutoConnect MMM, FEL w/WR Long Toothbar, 47" Front Mount Snowblower, 54" Front Mount Blade w/ Rubber Edge, 48" KingKutter Tiller & Brush Hog, CountyLine Carry All and CountyLine 60" Rear Blade, Pat's EZ-Change Quick Hitch System
    1990 JD 185 - 46"MMM w/Power Flow Bagger

  4. The Following User Says Thank You to ColonyPark For This Useful Post:

    rw580 (12-12-2017)

  5. Top | #3
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 06:37 PM
    Central Pennsylvania
    Thanked 1,685 Times in 1,273 Posts
    Initially you want to have some extra shear bolts/nuts. Your blower may have some spares mounted in the left side to the rear of the housing. I know the shaft-drive model does but I'm not sure about the belt-driven model. You may want to have an extra drive belt on hand. I've read comments about some blowers shredding belts prematurely. Other than a belt and shear bolts/nuts I cannot think of any other spares to have initially.

    47 Inch Snowblower
    Item Part Number
    Snowblower Drive Belt M149970
    Auger Shear Bolt (M6 x 45) 19M8321
    Auger Shear Bolt Nut (M6) 14M7397
    Impeller Shear Bolt (M5 x 40) M154492
    Impeller Shear Bolt Nut (M5) 14M7375
    Scraper Blade M135649
    Last edited by jgayman; 12-12-2017 at 02:24 PM.
    ColonyPark and Firemark like this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  6. Remove Advertisements

  7. Top | #4
    Herminator's Avatar
    Join Date
    Mar 2017
    Last Online
    Today @ 09:36 PM
    Northern Illinois
    Thanked 874 Times in 658 Posts
    I agree with the others. Shear bolts but really I have only broke them when someone throws a newspaper in the drive.

    I used my 38” on the 112 for many years. Let’s see it was a 1968 and I stopped using it around 2000. I did about 6 driveways with it each snow. I only remember replacing the shoes and scraper blade once and probably a belt here or there.

    The 46” is an 1982, was used until 10 years ago. I am redoing it now. The shoes were worn through and the blade was wore pretty good. I am replacing some springs and the bearings (because now is the time otherwise they were still good) but for everything it was less than $150.00 and it will be like new. Not bad when the primer and paint alone will be just under a 100 I bet.

    They last quite well. Of course these are the single stage thrower type but I will bet the 2 stage blower types last just as good.
    Last edited by Herminator; 12-12-2017 at 03:41 PM.
    Welcome to Intermission.

    2017 2038R, 400, 3020 & HPX and thingies to hook to the them.
    112 - Sold in July 2017 but took me until November to admit I just cast it out into this cruel world.

  8. Top | #5

    Join Date
    Jan 2016
    Last Online
    Today @ 08:16 PM
    Thanked 63 Times in 36 Posts
    Definitely have at least one spare belt!
    2015 1025R FILB, iMatch, 53" Bucket, 54D Mower Deck, 54" Snow Blower, Heavy Hitch Dual Suitcase Weight Bracket, Heavy Hitch Front Weight Bracket, EA 48" Plugger, Garber 48" 3 point Seeder, Kens bolt on hooks, CountyLine (Tarter Gate) 60" box blade, Kenda Terra Trac HDAP tires (front and rear), CozyCab Sunshade, TSC CountyLine (Tarter) 48" yellow rototiller, BXPanded 25 gallon 3PH sprayer.

  9. Remove Advertisements


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts