Snowblower question and need help ....
Results 1 to 10 of 10
Like Tree23Likes
  • 3 Post By Superglidesport
  • 7 Post By dieselshadow
  • 3 Post By Superglidesport
  • 1 Post By dieselshadow
  • 1 Post By USAFRet
  • 5 Post By ErikR
  • 2 Post By kadorken
  • 1 Post By BillieS

Thread: Snowblower question and need help ....

  1. Top | #1
    USAFRet's Avatar
    Join Date
    Jun 2017
    Last Online
    Today @ 09:39 AM
    Location
    Northwood,NH
    Posts
    195
    Thanks
    10
    Thanked 13 Times in 13 Posts

    Snowblower question and need help ....

    Tractor and snow blower working great but I do have a question and hope there is a work around.

    I start the tractor 1500 rpm and engage the pto and then run it up to 3000. Then I blow a little but need to back up. So I have to throttle down to 1500 disengage pto back up and then start the circle over. .....

    Am I doing something wrong or is this the actual way it was intended? Seems I am wasting a lot of time ..... but still love it


    2017 1025R with turf tires
    H120 FEL with 53" Bucket Quick Change
    54" Autoconnect Mower, mulch kit and hyd mower lift
    54" Quick-Hitch Two Stage Snow Blower Hyd Rotator with Remote Spout Cap kit
    Ballast box with tubes
    IMatch
    Engine blanket
    LED lights
    Ken's Bolt on Hooks and rear hitch
    Country Time/Tarter 48" Tiller
    Titan carriage & 42" forks




    PS Everyone knows what a 1025R looks like so my Avatar is a picture of my two girls!!!

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Superglidesport's Avatar
    Join Date
    Dec 2011
    Last Online
    Today @ 10:12 AM
    Location
    Littleton, MA
    Posts
    7,728
    Thanks
    697
    Thanked 1,586 Times in 996 Posts
    Once you're at PTO speed there's no need to reduce rpm's to reverse direction. That's the beauty of a hydrostatic drive.

    I'm assuming your rig has the RIO "Feature."

    Just make sure you pull up on the PTO knob momentarily before engaging reverse to prevent stalling the engine.
    John Deere 3320
    eHydro, R4's, 300CX Loader, 61" HD Bucket
    JD Tooth Bar, Deluxe Hood Guard, Ken's Bolt-on Hooks
    485 Backhoe w. 18" HD Bucket
    Mid-PTO, Front 3 Point Hitch, 366 Front Blade
    Tarter 5' 3PH Tiller
    Frontier AP12F Forks

    John Deere 2032R
    R3's, 220R Loader, 57" HD Bucket
    Curtis Hard Side Cab & Heater
    62D Deck, iMatch Quick Hitch
    54 Snowblower
    Super HeavyHitch
    Little Wonder "Optimax" & JRCO Blower Buggy
    Fimco 60 Gallon 3PH Boomless Sprayer w. PTO Pump

  4. Top | #3
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Today @ 11:13 AM
    Location
    Joelton TN
    Posts
    19,985
    Thanks
    1,069
    Thanked 4,339 Times in 2,609 Posts
    You can also make sure the front PTO speed sensor located on the front quick hitch is plugged in. This bypasses RIO for you.
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

    Quote Originally Posted by Gizmo2 View Post
    Dieselshadow is my Hero.


  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    Superglidesport's Avatar
    Join Date
    Dec 2011
    Last Online
    Today @ 10:12 AM
    Location
    Littleton, MA
    Posts
    7,728
    Thanks
    697
    Thanked 1,586 Times in 996 Posts
    Quote Originally Posted by dieselshadow View Post
    You can also make sure the front PTO speed sensor located on the front quick hitch is plugged in. This bypasses RIO for you.
    Good tip Jason.

    I wasn't aware as my older 47 SB and Quick Hitch were used on the new 2032R with RIO. There's no sensor and harness on the QH.
    etcallhome, dieselshadow and rw580 like this.
    John Deere 3320
    eHydro, R4's, 300CX Loader, 61" HD Bucket
    JD Tooth Bar, Deluxe Hood Guard, Ken's Bolt-on Hooks
    485 Backhoe w. 18" HD Bucket
    Mid-PTO, Front 3 Point Hitch, 366 Front Blade
    Tarter 5' 3PH Tiller
    Frontier AP12F Forks

    John Deere 2032R
    R3's, 220R Loader, 57" HD Bucket
    Curtis Hard Side Cab & Heater
    62D Deck, iMatch Quick Hitch
    54 Snowblower
    Super HeavyHitch
    Little Wonder "Optimax" & JRCO Blower Buggy
    Fimco 60 Gallon 3PH Boomless Sprayer w. PTO Pump

  7. Top | #5
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Today @ 11:13 AM
    Location
    Joelton TN
    Posts
    19,985
    Thanks
    1,069
    Thanked 4,339 Times in 2,609 Posts
    [QUOTE=Superglidesport;2455609I wasn't aware as my older 47 SB and Quick Hitch were used on the new 2032R with RIO. There's no sensor and harness on the QH. [/QUOTE]

    But the OP’s tractor does.
    rw580 likes this.
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

    Quote Originally Posted by Gizmo2 View Post
    Dieselshadow is my Hero.


  8. Top | #6
    USAFRet's Avatar
    Join Date
    Jun 2017
    Last Online
    Today @ 09:39 AM
    Location
    Northwood,NH
    Posts
    195
    Thanks
    10
    Thanked 13 Times in 13 Posts

    Thanks

    Thanks for the advice. I will check and see if it is plugged in.

    The thing is I had the dealer come down and hook it all up to make sure everything worked as it should.

    I never thought to try backing up to see if it would shut off........
    rw580 likes this.


    2017 1025R with turf tires
    H120 FEL with 53" Bucket Quick Change
    54" Autoconnect Mower, mulch kit and hyd mower lift
    54" Quick-Hitch Two Stage Snow Blower Hyd Rotator with Remote Spout Cap kit
    Ballast box with tubes
    IMatch
    Engine blanket
    LED lights
    Ken's Bolt on Hooks and rear hitch
    Country Time/Tarter 48" Tiller
    Titan carriage & 42" forks




    PS Everyone knows what a 1025R looks like so my Avatar is a picture of my two girls!!!

  9. Top | #7
    ErikR's Avatar
    Join Date
    Jan 2015
    Last Online
    Today @ 02:10 AM
    Location
    Northern WI
    Posts
    709
    Thanks
    28
    Thanked 207 Times in 126 Posts
    Just an FYI, you may already have all you need to "fix" the problem...........


    Click image for larger version. 

Name:	DSCF8553.JPG 
Views:	8 
Size:	200.9 KB 
ID:	508705
    ColonyPark, Doug, ejb69 and 2 others like this.
    2014 1025R, H120 loader w/53" bucket and Heavy Hitch Tooth Bar, 54" Auto Connect MMM, 47" QH snow blower, Ballast box and loaded rear tires, Speeco Quick Hitch, Ken's Bolt-on Grab Hooks, King Kutter Carry All, 54" front QH blade w/Heavy Hitch skids, Titan 36" pallet forks, Land Pride GS0560 Grading Scraper, and chrome (kitchen drain pipe) exhaust tip!!

    1950 Allis-Chalmers B, Electric start, PTO, Belt Pulley, Hydraulic pump. Stuck engine (a work in progress)

  10. Top | #8

    Join Date
    May 2017
    Last Online
    10-31-2019 @ 08:10 AM
    Location
    ON
    Posts
    124
    Thanks
    31
    Thanked 19 Times in 16 Posts

    Better yet, disable RIO in tractor settings

    See http://www.greentractortalk.com/foru...017-2032r.html

    I am sure similar methods work on most models.
    ejb69 and rw580 like this.
    2018 Kubota RTVX 1100c
    2014 JD3046R CAB, H165 FEL, 72 HD" Bucket, 72D Auto MMM, Quick Hitch, Ballast Box, Frontier 1172 SB
    2002 JD4310 OS, 430 FEL, 60" HD Bucket, 60" MMM, Quick Hitch
    2001 Kubota TG1860G
    Wallenstein BX42R Chipper, JD MX5 Mower, HORST Pallet Forks
    Berkelmans Welding 2 Ton Farm Dump Trailer (JD Green)

  11. Top | #9

    Join Date
    May 2013
    Last Online
    11-08-2019 @ 11:34 AM
    Location
    Eastern Panhandle WV
    Posts
    1,034
    Thanks
    16
    Thanked 168 Times in 96 Posts
    Quote Originally Posted by ErikR View Post
    Just an FYI, you may already have all you need to "fix" the problem...........


    Click image for larger version. 

Name:	DSCF8553.JPG 
Views:	8 
Size:	200.9 KB 
ID:	508705
    It probably cost JD $500,000 to invent the RIO and this expensive switch. With American ingenuity it cost $.025 to disable it. Got to love it.
    ErikR likes this.
    2019 3046r, 385A BH, FEL, JD Ballist box, 6' 3pt hitch rake, 4 way 48" snow blade, 7' 3pt hitch drag blade
    Zero turn Z445, 5' 3pt hitch woods mower, 42" Artillian Pallet forks W/Adapter for snow plow, Standard 3pt hitch receiver to move trailers.
    I haul the tractor with a 2015 2500HD Chevrolet Silverado 4X4 6.6L Duramax W/Allison transmission a 2013 18' 7500lb dove tail trailer made by Appilachian trailers.
    Stihl MS271 Farm Boss Chain Saw 18" blade, Piranha Bar.

  12. Top | #10
    ErikR's Avatar
    Join Date
    Jan 2015
    Last Online
    Today @ 02:10 AM
    Location
    Northern WI
    Posts
    709
    Thanks
    28
    Thanked 207 Times in 126 Posts
    USAFRet, I sent you a couple of PMs

    This is the pic a wanted to send....

    Click image for larger version. 

Name:	DSCF7866.jpg 
Views:	6 
Size:	60.5 KB 
ID:	509145
    2014 1025R, H120 loader w/53" bucket and Heavy Hitch Tooth Bar, 54" Auto Connect MMM, 47" QH snow blower, Ballast box and loaded rear tires, Speeco Quick Hitch, Ken's Bolt-on Grab Hooks, King Kutter Carry All, 54" front QH blade w/Heavy Hitch skids, Titan 36" pallet forks, Land Pride GS0560 Grading Scraper, and chrome (kitchen drain pipe) exhaust tip!!

    1950 Allis-Chalmers B, Electric start, PTO, Belt Pulley, Hydraulic pump. Stuck engine (a work in progress)

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •