Larger 2032R bucket?
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19
Like Tree37Likes

Thread: Larger 2032R bucket?

  1. Top | #1
    airpixlesvan's Avatar
    Join Date
    Aug 2017
    Last Online
    12-26-2018 @ 04:54 PM
    Location
    Loudon, NH
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Larger 2032R bucket?

    I have the H130 Loader on my 2032R which works great for moving dirt, etc but I would love to have some type of larger bucket that would hold more brush or demolition scrap material. The weight I'm looking to pick up would be considerably less than what I use the H130 for so weight wouldn't be an issue. Does anyone know of a larger type brush / debris bucket?

    Thanks, John Ford

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    coaltrain's Avatar
    Join Date
    May 2014
    Last Online
    Today @ 07:01 AM
    Location
    NW Penna
    Posts
    20,114
    Thanks
    1,092
    Thanked 3,100 Times in 2,263 Posts
    What size bucket do you have now? Most all Deere loader are available with a couple different size buckets. The larger buckets are called material buckets for the reason you state.

    You can buy a second bucket - takes but a few seconds to change them out.
    ~Stan~
    It is what it is
    Knowledge is power, ignorance is bliss
    2520 w/200CX w/62D2

  4. Top | #3
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 10:26 PM
    Location
    Central Pennsylvania
    Posts
    10,029
    Thanks
    371
    Thanked 1,659 Times in 1,257 Posts
    Here is a compatibility chart for the H130. It looks like 61-inch is the largest official bucket. I suspect you could use the 73-inch bucket since the compatibility overlaps between the H130 and 300CX. I suspect JD doesn't include it as it would be too large and heavy for anything but lightweight material. You could always measure the pin spacing to verify. BTW, the 73-inch bucket is $1030.

    How often do you anticipate needing a larger bucket? You could always fabricate some bolt-on wooden sides for your existing bucket to allow it to hold more loose material like brush.

    Click image for larger version. 

Name:	4.jpg 
Views:	26 
Size:	13.9 KB 
ID:	585545
    Click image for larger version. 

Name:	5.jpg 
Views:	28 
Size:	149.8 KB 
ID:	585553

    Click image for larger version. 

Name:	BW14146.jpg 
Views:	25 
Size:	32.8 KB 
ID:	585561

    Click image for larger version. 

Name:	BW14147.jpg 
Views:	24 
Size:	31.9 KB 
ID:	585569
    Last edited by jgayman; 04-05-2018 at 09:28 AM.
    Gizmo2 likes this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    PaDave's Avatar
    Join Date
    Jan 2013
    Last Online
    Yesterday @ 09:24 PM
    Location
    NW.PA
    Posts
    432
    Thanks
    146
    Thanked 107 Times in 77 Posts
    I think 61"is as wide as you can go with JD buckets for the H130
    LoaderAttachmentsGuide.pdf
    BigJim55 likes this.
    3520, Sicma 74 tiller, 12Kw PTO gen, 72"auto connect deck, 300cx FEL, 61"HD w/JD toothbar & 6ft snow pusher, JD Ballast box w/Extension, Land Pride FDR-2584 finish mower,

  7. Top | #5
    coaltrain's Avatar
    Join Date
    May 2014
    Last Online
    Today @ 07:01 AM
    Location
    NW Penna
    Posts
    20,114
    Thanks
    1,092
    Thanked 3,100 Times in 2,263 Posts
    As far as hauling scrap material and tree debris - what many of us have done is buy forks. Their uses are just about endless. I along with many others have found we use our forks much more than our buckets.

    Click image for larger version. 

Name:	C374F04F-3E3D-43C0-A789-4059AEAF25E6.jpg 
Views:	24 
Size:	207.3 KB 
ID:	585601
    glc, Gizmo2, Doug and 4 others like this.
    ~Stan~
    It is what it is
    Knowledge is power, ignorance is bliss
    2520 w/200CX w/62D2

  8. Top | #6
    HomesteadJoe's Avatar
    Join Date
    Mar 2017
    Last Online
    Yesterday @ 07:04 PM
    Location
    Southwestern Connecticut
    Posts
    1,573
    Thanks
    139
    Thanked 279 Times in 202 Posts
    Quote Originally Posted by airpixlesvan View Post
    I have the H130 Loader on my 2032R which works great for moving dirt, etc but I would love to have some type of larger bucket that would hold more brush or demolition scrap material. The weight I'm looking to pick up would be considerably less than what I use the H130 for so weight wouldn't be an issue. Does anyone know of a larger type brush / debris bucket?

    Thanks, John Ford
    Have you ever considered a grapple?
    You can easily install the 3rd function hydraulics for the loader yourself. It's not complicated at all. See the attached video I made about installing the WR Long 3rd function hydraulics, as well as the videos of the EA 55" Wicked Root Rake Grapple I installed. The setup is truly BadAss!!! Let me know if you have any questions. Can guide you through the installation .....happy to do so....

    Sincerely

    https://www.youtube.com/watch?v=TbRzlQytrVA

    https://www.youtube.com/watch?v=RCR2u_u0hk4

    https://www.youtube.com/watch?v=gAVl9be0y7Q

    https://www.youtube.com/watch?v=URe8E7mBSmc

    https://www.youtube.com/watch?v=WjKAubBYKgE

    https://www.youtube.com/watch?v=dnVqubZJygY
    BigJim55 and Big like this.
    BadAss 2038R, R3s, R4s, Spacers, Eng & Tranny Heaters, LEDs, Cages, Fender Flares, Front Fenders, iMatch, Heavy Hitch, Hitch-N-Can, 800# Quick Tach Weights, 220R Loader, Single Point Hyd, 57" HD Bucket, WR Long Tooth Bar & 3rd Function Hyd, 55" Wicked Root Rake Grapple, 270B Backhoe, 72D MMM, Front 3 pt Hitch, 366 FMB Blade, PHD300 Post Hole Digger w\ Auger Set, LR2172 Landscape Rake w/gage Wheels, RB2072 Rear Blade, BB2072 Box Blade, AP12F Pallet Forks, EA 72" Pine Needle Rake, Fit-Rite TNT

  9. Top | #7
    airpixlesvan's Avatar
    Join Date
    Aug 2017
    Last Online
    12-26-2018 @ 04:54 PM
    Location
    Loudon, NH
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I have a set of forks that work great but I need something that will hold brush, sod, leaves, building debris, etc and the bucket I have is just to small to make it worthwhile for this light weight material. Bolt on wooden sides may do the trick. John

  10. Top | #8
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 10:26 PM
    Location
    Central Pennsylvania
    Posts
    10,029
    Thanks
    371
    Thanked 1,659 Times in 1,257 Posts
    Quote Originally Posted by airpixlesvan View Post
    I have a set of forks that work great but I need something that will hold brush, sod, leaves, building debris, etc and the bucket I have is just to small to make it worthwhile for this light weight material. Bolt on wooden sides may do the trick. John
    If you have a set of forks there is another idea I've been kicking around. A 53" bucket is ~7.8 CUFT. If you need to mostly haul and dump debris but not scoop how about something that is 17 cubic feet and is very lightweight?

    Below is a Brinly 17P poly cart. It is identical to the JD 17P cart except it is black and costs less at ~$299. I've been kicking around the idea of buying one of these carts, removing the tub and bolting two steel box channels to the bottom that would accept fork tines. You could then slide this onto the forks with the flat front side against the fork backstop and secure with a strap or chain. This would provide a cheap 17 cubic foot debris bucket that once filled could easily be dumped. This would provide 60% more capacity than even the 73-inch bucket at 1/3 the cost!

    I have the JD 17P poly lawn cart and the thing is a beast. It is rated for hauling ~1000 lbs.


    Click image for larger version. 

Name:	Brinly_17P.jpg 
Views:	102 
Size:	12.5 KB 
ID:	585865
    Last edited by jgayman; 04-05-2018 at 02:38 PM.
    BigJim55 and coaltrain like this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  11. The Following User Says Thank You to jgayman For This Useful Post:

    BigJim55 (04-05-2018)

  12. Top | #9
    coaltrain's Avatar
    Join Date
    May 2014
    Last Online
    Today @ 07:01 AM
    Location
    NW Penna
    Posts
    20,114
    Thanks
    1,092
    Thanked 3,100 Times in 2,263 Posts
    Quote Originally Posted by jgayman View Post
    If you have a set of forks there is another idea I've been kicking around. A 53" bucket is ~7.8 CUFT. If you need to mostly haul and dump debris but not scoop how about something that is 17 cubic feet and is very lightweight?

    Below is a Brinly 17P poly cart. It is identical to the JD 17P cart except it is black and costs less at ~$299. I've been kicking around the idea of buying one of these carts, removing the tub and bolting two steel box channels to the bottom that would accept fork tines. You could then slide this onto the forks with the flat front side against the fork backstop and secure with a strap or chain. This would provide a cheap 17 cubic foot debris bucket that once filled could easily be dumped. This would provide 60% more capacity than even the 73-inch bucket at 1/3 the cost!

    I have the JD 17P poly lawn cart and the thing is a beast. It is rated for hauling ~1000 lbs.


    Click image for larger version. 

Name:	Brinly_17P.jpg 
Views:	102 
Size:	12.5 KB 
ID:	585865
    Thinking in that frame of mind - one of our members got himself one of these last year - he uses it all the time. Available in many different sizes and styles.

    https://www.countrymfgstore.com/wagonstrailers.html

    Click image for larger version. 

Name:	B582BA7E-5EE6-4559-AAE6-2B4E009968DE.gif 
Views:	100 
Size:	10.4 KB 
ID:	585889
    BigJim55 likes this.
    ~Stan~
    It is what it is
    Knowledge is power, ignorance is bliss
    2520 w/200CX w/62D2

  13. Top | #10
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 10:26 PM
    Location
    Central Pennsylvania
    Posts
    10,029
    Thanks
    371
    Thanked 1,659 Times in 1,257 Posts
    Quote Originally Posted by coaltrain View Post
    Thinking in that frame of mind - one of our members got himself one of these last year - he uses it all the time. Available in many different sizes and styles.

    https://www.countrymfgstore.com/wagonstrailers.html

    Click image for larger version. 

Name:	B582BA7E-5EE6-4559-AAE6-2B4E009968DE.gif 
Views:	100 
Size:	10.4 KB 
ID:	585889
    I think the OP needs something for the loader. There's no question that carts have their place but the problem with a cart is that once you load it up you have to manually unload it. That's why I prefer to haul brush with the loader and just dump it on the brush pile.
    BigJim55 likes this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  14. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •