Landscape Rake + Dolly
Results 1 to 3 of 3
Like Tree3Likes
  • 3 Post By martincom

Thread: Landscape Rake + Dolly

  1. Top | #1

    Join Date
    Feb 2018
    Last Online
    10-18-2018 @ 09:07 AM
    Zone 6B
    Thanked 0 Times in 0 Posts

    Landscape Rake + Dolly

    Hi! I've created a system to move all of my attachments around with these dollys, but the landscape rake I just got doesn't quite fit and I've had to use a 5 gallon bucket as a temporary solution. The problem is is that I've almost crushed my foot as it slid off the bucket a few times. Does anyone know or have a solution to something like this? Your help is very much appreciated!

    JD 2025R

  2. Remove Advertisements

  3. Top | #2
    martincom's Avatar
    Join Date
    Jan 2017
    Last Online
    Yesterday @ 02:24 PM
    Brainerd, MN
    Thanked 271 Times in 209 Posts
    Here is what I came up with for mine:

    You'll want to start with some gauge wheels, which you really need anyway. Do a search, I'm pretty sure I've seen threads where members have adapted something to a TSC LR.

    Your attachment frame doesn't provide for the simple solution that I employed. I might start with a square tube mounted in front of the vertical upright, perhaps a 2" hitch receiver. I'd follow that with a mating spud tube with a caster plate welded to the bottom. You want something you can install/remove while the LR is still mounted on the 3-point. They're not light and speaking for myself, I'm not getting any younger.
    Last edited by martincom; 07-11-2018 at 02:58 PM.
    JD322, keane and goat704! like this.
    2017 1025R TLB & 2017 1025R FEL
    2*54 Mower Decks w/Independent Lift
    2*47 Snow Blowers
    2*Cozy Cab
    2*Heavy Hitch Receiver Hitch w/Dual Suitcase Weight Brackets, Storage Cart, & 1*Front Suitcase Weight Bracket
    50" Wicked Root Grapple
    Land Pride LR1560 Land Rake w/ wide gauge wheels & plow blade
    BXpanded Backhoe Dolly
    MCS20 Leaf/clippings hopper
    647 Tiller
    2001 455 AWS & 1999 455 AWS--Both Sold

  4. Top | #3
    Cutty72's Avatar
    Join Date
    Jan 2017
    Last Online
    Yesterday @ 04:43 PM
    Thanked 113 Times in 101 Posts
    If you want to keep using those dollys, then I'd suggest a couple 2x4s to connect the 2, and then either bolt the bucket to the dolly, or create a cross member in it's place that is connected to the dolly.
    2010 2320 with 200cx FEL
    54D MMM
    54" front mount blower
    Titan 42" forks w/ receiver hitch
    County Line 5' tiller
    6' JD rear blade (tree find)

  5. Remove Advertisements


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts