iMatch (Discontinued) Draft Arm Pins?
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
Like Tree17Likes

Thread: iMatch (Discontinued) Draft Arm Pins?

  1. Top | #1
    Boonie's Avatar
    Join Date
    May 2018
    Last Online
    09-01-2019 @ 08:55 AM
    Location
    Pacific Northwest Region
    Posts
    570
    Thanks
    56
    Thanked 31 Times in 27 Posts

    iMatch (Discontinued) Draft Arm Pins?

    Wondering if some knows where I can find a set of draft-arm pins for the old style LVB25255 iMatch. Discontinued - iMatchâ„¢ Quick-Hitch
    I went to the dealer today in hopes of getting a set, but all he had were pins for the new style. The holes on the old style are 7/8", so I'm thinking the pins are "special". 3/4" bolts are currently being used temporarily, but the fitment is really loose.
    Last edited by Boonie; 08-15-2018 at 05:40 PM.
    greenharley likes this.
    2018 X739 w/54HC MMM & Mulch Kit
    54" 4-Way Plow w/Custom Mount
    Ruegg 3PH and a gaggle of implements.

    TSC = The Village of Idiots

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 05:34 AM
    Location
    Westminster, MD
    Posts
    16,240
    Thanks
    4,992
    Thanked 4,030 Times in 2,510 Posts
    Try searching for part number PM9206, I did not realize they changed the pins for the new style iMatch.

    Attached Thumbnails Attached Thumbnails Screen Shot 2018-08-15 at 6.46.58 PM.jpg  
    greenharley and Steve O like this.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  4. The Following User Says Thank You to Kennyd For This Useful Post:

    Boonie (08-15-2018)

  5. Top | #3
    Boonie's Avatar
    Join Date
    May 2018
    Last Online
    09-01-2019 @ 08:55 AM
    Location
    Pacific Northwest Region
    Posts
    570
    Thanks
    56
    Thanked 31 Times in 27 Posts
    Thanks Kenny. Much appreciated!
    greenharley likes this.
    2018 X739 w/54HC MMM & Mulch Kit
    54" 4-Way Plow w/Custom Mount
    Ruegg 3PH and a gaggle of implements.

    TSC = The Village of Idiots

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4
    IndianaJim's Avatar
    Join Date
    Feb 2013
    Last Online
    09-16-2019 @ 06:08 PM
    Location
    Indiana
    Posts
    1,448
    Thanks
    24
    Thanked 198 Times in 151 Posts
    Youd have to have your dealer do a dealer inventory search to find one, if anyone has one.
    They can do this, they just might not want to.

    The other option is to find a pin of the correct length and diameter and just buy that.
    I assume the new pin will work with it, as the link ends are the same diameter, but the new pin is considerably more costly.

    I dont know the width of the old style hitch, but the working length would need to be at least that length.
    Someone like McMaster Carr would have it for sure, but youd need to order a quantity to get two most likely. Id bet Tractor Supply or a similar farm supply store would have them.
    greenharley likes this.
    Jim B.

    318, 49 Thrower, 2 80 Carts, 17AT cart, 54 Blade, 12" Brinly Plow, 30 Hydraulic Tiller w/extension & Briney 3-Pt hitch, 50 deck w/JRCO Cart Bagger.
    2025R, 120R loader w/Kens Bolt On Hooks, 260B backhoe w/8" & 16" buckets, Titan 36" forks, Imatch hitch, Weight Bracket/Hitch.

    Exmark Lazer Z HP 52"
    Husqvarna 550XP, 562XP, 55 Rancher

  8. The Following User Says Thank You to IndianaJim For This Useful Post:

    Boonie (08-15-2018)

  9. Top | #5
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 05:34 AM
    Location
    Westminster, MD
    Posts
    16,240
    Thanks
    4,992
    Thanked 4,030 Times in 2,510 Posts
    The OEM pins sells for under $7 each, thats a bargain, you just need a regular cotter to retain them:

    https://www.greenpartstore.com/John-...in-PM9206.html
    greenharley and Boonie like this.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  10. Top | #6
    Boonie's Avatar
    Join Date
    May 2018
    Last Online
    09-01-2019 @ 08:55 AM
    Location
    Pacific Northwest Region
    Posts
    570
    Thanks
    56
    Thanked 31 Times in 27 Posts
    The new pins are like $30/ea.
    The old are cheap. I'll take two of them. I got the order in with my dealer. Waiting for them to call me back.
    greenharley likes this.
    2018 X739 w/54HC MMM & Mulch Kit
    54" 4-Way Plow w/Custom Mount
    Ruegg 3PH and a gaggle of implements.

    TSC = The Village of Idiots

  11. Top | #7
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 05:34 AM
    Location
    Westminster, MD
    Posts
    16,240
    Thanks
    4,992
    Thanked 4,030 Times in 2,510 Posts
    I should charge a commission for doing the parts guys job
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  12. Top | #8
    Boonie's Avatar
    Join Date
    May 2018
    Last Online
    09-01-2019 @ 08:55 AM
    Location
    Pacific Northwest Region
    Posts
    570
    Thanks
    56
    Thanked 31 Times in 27 Posts
    Quote Originally Posted by Kennyd View Post
    I should charge a commission for doing the parts guys job
    I know right!! It seems like this is the scenario almost every time I go in there for something. Everyone there is "young" and naive to what's what.
    I need to learn my way around the Deere "Parts" pages so I know what the heck I'm doing. I have a hell of a time finding things. I do appreciate your assist!!
    Kennyd and greenharley like this.
    2018 X739 w/54HC MMM & Mulch Kit
    54" 4-Way Plow w/Custom Mount
    Ruegg 3PH and a gaggle of implements.

    TSC = The Village of Idiots

  13. Top | #9
    IndianaJim's Avatar
    Join Date
    Feb 2013
    Last Online
    09-16-2019 @ 06:08 PM
    Location
    Indiana
    Posts
    1,448
    Thanks
    24
    Thanked 198 Times in 151 Posts
    Mine showed they were "supplier direct" and to contact dealer for options.
    That usually means they are NLA, but hopefully in this case, thats not the case!

    They are awful cheap compared to the new ones!
    greenharley likes this.
    Jim B.

    318, 49 Thrower, 2 80 Carts, 17AT cart, 54 Blade, 12" Brinly Plow, 30 Hydraulic Tiller w/extension & Briney 3-Pt hitch, 50 deck w/JRCO Cart Bagger.
    2025R, 120R loader w/Kens Bolt On Hooks, 260B backhoe w/8" & 16" buckets, Titan 36" forks, Imatch hitch, Weight Bracket/Hitch.

    Exmark Lazer Z HP 52"
    Husqvarna 550XP, 562XP, 55 Rancher

  14. The Following User Says Thank You to IndianaJim For This Useful Post:

    Boonie (08-15-2018)

  15. Top | #10
    Boonie's Avatar
    Join Date
    May 2018
    Last Online
    09-01-2019 @ 08:55 AM
    Location
    Pacific Northwest Region
    Posts
    570
    Thanks
    56
    Thanked 31 Times in 27 Posts
    Quote Originally Posted by IndianaJim View Post
    Mine showed they were "supplier direct" and to contact dealer for options.
    That usually means they are NLA, but hopefully in this case, thats not the case!

    They are awful cheap compared to the new ones!
    That would be the sheits. NLA is a crock. In that case, they're forcing people to "step up"
    I'll have a set made if they can't get them.
    greenharley likes this.
    2018 X739 w/54HC MMM & Mulch Kit
    54" 4-Way Plow w/Custom Mount
    Ruegg 3PH and a gaggle of implements.

    TSC = The Village of Idiots

  16. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •