54” MM Auto Connect Deck Gearbox “cap-vent?” Damaged
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18
Like Tree33Likes

Thread: 54” MM Auto Connect Deck Gearbox “cap-vent?” Damaged

  1. Top | #1
    pmhgeneral's Avatar
    Join Date
    Sep 2017
    Last Online
    09-18-2019 @ 09:09 AM
    Location
    Shavertown, Pa
    Posts
    52
    Thanks
    34
    Thanked 7 Times in 7 Posts

    54” MM Auto Connect Deck Gearbox “cap-vent?” Damaged

    I started doing my 50 hours service on my 1023E today and began yesterday with pressure washing the deck and cleaning, today started to grease and check the gearbox oil and found this cap or vent bent I have no idea how it could have happened. Does anybody might know what it hit under the tractor and should I replace it. I tried to find a part # but can’t find one if any one would know.
    Thanks


    JD 1023-E 2017 H-120 Loader, 54” AC MMD, Ballast Box, 47” JD Snowblower w/Quick Hitch & Remote Control Chute Flap, OT Cab w/Glass Windshield, Wiper, Heater, Armrest added, Front Led Lights, JD IMatch QH, Rear Hitch Receiver, Rear 3-pt Blade
    Interest: Woodworking-Tractors-Chris-Craft Boats.
    Sent from my iPhone using Tapatalk

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 10:59 PM
    Location
    Central Pennsylvania
    Posts
    9,803
    Thanks
    368
    Thanked 1,610 Times in 1,223 Posts
    Yes, definitely replace it. There are several threads on this subject. It is item#38 below.



    38 JD5801 Pressure Relief Fitting 1


    PART DETAILS
    Part Number: JD5801
    Part Price: 1.83 USD Each
    On Hand: 3 Check Other Stores
    Description: Pressure Relief Fitting - VALVE, RELIEF-ALEMITE 131000
    Package Quantity:
    Attached Thumbnails Attached Thumbnails 54_deck.jpg  
    Last edited by jgayman; 08-19-2018 at 09:36 PM.
    Ray_PA, PJR832 and pmhgeneral like this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  4. The Following 2 Users Say Thank You to jgayman For This Useful Post:

    pmhgeneral (08-22-2018), TheOtherChris (08-19-2018)

  5. Top | #3

    Join Date
    May 2013
    Last Online
    Today @ 09:10 PM
    Location
    Vermont
    Posts
    117
    Thanks
    5
    Thanked 11 Times in 11 Posts
    Replace it and get the gearbox oil changed. Water in the oil probably isn't an issue since the cap is still there but I ruined a gearbox because the cap came off and water got in.


    Sent from my iPhone using Tapatalk
    PJR832 and pmhgeneral like this.

  6. The Following User Says Thank You to vt2305 For This Useful Post:

    pmhgeneral (08-22-2018)

  7. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  8. Top | #4

    Join Date
    Jun 2017
    Last Online
    09-15-2019 @ 07:42 AM
    Location
    Central NY
    Posts
    23
    Thanks
    2
    Thanked 3 Times in 3 Posts
    I just replaced the same vent. A new one from the dealer was a whopping $1.88. It’s listed as a Pressure Relief Valve, part # JD5801

    ****The pic on the post above didn’t load before I posted this***
    Last edited by Ropie; 08-20-2018 at 07:54 PM.
    PJR832 and pmhgeneral like this.

  9. The Following User Says Thank You to Ropie For This Useful Post:

    pmhgeneral (08-22-2018)

  10. Top | #5
    Bonehead Club Lackey Levi's Avatar
    Join Date
    Jul 2013
    Last Online
    09-20-2019 @ 10:39 AM
    Location
    NE Tenn.
    Posts
    10,148
    Thanks
    2,987
    Thanked 1,896 Times in 1,064 Posts
    Quote Originally Posted by Ropie View Post
    I just replaced the same vent. A new one from the dealer was a whopping $1.88. It’s listed as a Pressure Relief Valve, part # JD5801

    ****The pic on the post above didn’t load before I posted this***
    This pass June I paid $1.83 for mine. Same part #. Saved $.05 till I paid for my gas to get it.
    PJR832 and pmhgeneral like this.
    1026R -- 60D mmm -- H120 Loader -- Curtis 150 Tiller -- DR 3 point Chipper -- Howse Middle Buster -- Brinly 16 Blade Disk -- Kodiak 5' Box Blade -- 12-42 lb. suitcase weights -- Lawn roller -- Upgraded seat springs from psrumors -- Kennyd's bolt on hooks & clevis -- BXpanded tooth bar -- CMI 6' wagon -- Heavy Hitch Cultivator /garden bedder / hiller attachments --

    Donated by some great people/vendors on here: 72 lb. wheel weights -- Bro-Tek 1˝" rear wheel spacers.
    NRA Life Member

  11. The Following User Says Thank You to Levi For This Useful Post:

    pmhgeneral (08-22-2018)

  12. Top | #6
    pmhgeneral's Avatar
    Join Date
    Sep 2017
    Last Online
    09-18-2019 @ 09:09 AM
    Location
    Shavertown, Pa
    Posts
    52
    Thanks
    34
    Thanked 7 Times in 7 Posts
    Quote Originally Posted by jgayman View Post
    Yes, definitely replace it. There are several threads on this subject. It is item#38 below.



    38 JD5801 Pressure Relief Fitting 1


    PART DETAILS
    Part Number: JD5801
    Part Price: 1.83 USD Each
    On Hand: 3 Check Other Stores
    Description: Pressure Relief Fitting - VALVE, RELIEF-ALEMITE 131000
    Package Quantity:
    What do you think may have done this, I’m sure it must have to do with putting the deck on, last time I did with loader still on wondering if that had to do with it


    JD 1023-E 2017 H-120 Loader, 54” AC MMD, Ballast Box, 47” JD Snowblower w/Quick Hitch & Remote Control Chute Flap, OT Cab w/Glass Windshield, Wiper, Heater, Armrest added, Front Led Lights, JD IMatch QH, Rear Hitch Receiver, Rear 3-pt Blade
    Interest: Woodworking-Tractors-Chris-Craft Boats.
    Sent from my iPhone using Tapatalk

  13. Top | #7
    Ray_PA's Avatar
    Join Date
    Dec 2013
    Last Online
    Today @ 11:26 AM
    Location
    North of Harrisburg, PA
    Posts
    1,916
    Thanks
    138
    Thanked 553 Times in 331 Posts
    Quote Originally Posted by pmhgeneral View Post
    What do you think may have done this, I’m sure it must have to do with putting the deck on, last time I did with loader still on wondering if that had to do with it


    JD 1023-E 2017 H-120 Loader, 54” AC MMD, Ballast Box, 47” JD Snowblower w/Quick Hitch & Remote Control Chute Flap, OT Cab w/Glass Windshield, Wiper, Heater, Armrest added, Front Led Lights, JD IMatch QH, Rear Hitch Receiver, Rear 3-pt Blade
    Interest: Woodworking-Tractors-Chris-Craft Boats.
    Sent from my iPhone using Tapatalk
    Yep most likely. You may have had the bucket to low. That said, I know there are users that leave their FEL on when installing but, IMO and JD recommends it, all weight is supposed to be removed from the front of the tractor when installing the mmm.
    Levi, PJR832 and pmhgeneral like this.
    JD 1025 TLB (2013) ** 60D 7 Iron MMM w/auto-connect ** H120 FEL** 260 BH ** 54" snowblower ** 54" blade ** 52" Front Broom ** Ken's Bolt on Hooks ** Frontier BB2048L box scraper ** County Line 5' landscape rake ** JD Hydraulic Dump MCS ** Artillian Forks w/36" Forks ** JD 3 - Point Ballast Box ** JD I-Match Quick Hitch ** Heavy Hitch front Weight Bar ** Heavy Hitch 3 Point Weight Bar ** Fimco 40 Gallon Sprayer ** EA Aerator ** FitRite Hydraulics Rear SCV ** 12 - 40# suitcase weights

  14. Top | #8
    Bonehead Club Lackey Levi's Avatar
    Join Date
    Jul 2013
    Last Online
    09-20-2019 @ 10:39 AM
    Location
    NE Tenn.
    Posts
    10,148
    Thanks
    2,987
    Thanked 1,896 Times in 1,064 Posts
    Quote Originally Posted by pmhgeneral View Post
    What do you think may have done this, I’m sure it must have to do with putting the deck on, last time I did with loader still on wondering if that had to do with it

    Sent from my iPhone using Tapatalk
    Might have, could also have been the QH PTO part under the tractor was to high and you over shot the gear box shaft and hit the vent.
    Ray_PA, 1MOA, PJR832 and 1 others like this.
    1026R -- 60D mmm -- H120 Loader -- Curtis 150 Tiller -- DR 3 point Chipper -- Howse Middle Buster -- Brinly 16 Blade Disk -- Kodiak 5' Box Blade -- 12-42 lb. suitcase weights -- Lawn roller -- Upgraded seat springs from psrumors -- Kennyd's bolt on hooks & clevis -- BXpanded tooth bar -- CMI 6' wagon -- Heavy Hitch Cultivator /garden bedder / hiller attachments --

    Donated by some great people/vendors on here: 72 lb. wheel weights -- Bro-Tek 1˝" rear wheel spacers.
    NRA Life Member

  15. The Following User Says Thank You to Levi For This Useful Post:

    pmhgeneral (08-22-2018)

  16. Top | #9
    t2timmy's Avatar
    Join Date
    Aug 2015
    Last Online
    Today @ 09:36 AM
    Location
    CT
    Posts
    261
    Thanks
    51
    Thanked 16 Times in 12 Posts
    Wow! This is all new to me. Il have to check my cap now... Heck i didn’t know it had fluid in a gearbox that even needed to be changed?
    Thanks!



    Sent from my iPhone using Tapatalk
    Levi, pmhgeneral and kylew like this.
    2016 1025r - Amazing Machine!
    1969 112 - May need a rebuild

  17. Top | #10
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 10:59 PM
    Location
    Central Pennsylvania
    Posts
    9,803
    Thanks
    368
    Thanked 1,610 Times in 1,223 Posts
    Quote Originally Posted by t2timmy View Post
    Wow! This is all new to me. Il have to check my cap now... Heck i didn’t know it had fluid in a gearbox that even needed to be changed?
    Thanks!
    No offense but your Owner's Manual is your friend. Many times a quick read-through can help to avoid costly equipment damage.
    Levi likes this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  18. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •