I'd been looking at these for a bit (3 point/FEL adaptor) & recently Titan attachments ran a 20% off sale on theirs. Normally $299, $239 on sale (delivered price). Got here via Fedex ground in 4 days. The version I ordered works for both the 1025R & the 3038e FEL's and came with a CAT 2 top link pin & keeper and a solid link. I'll have to pick up a couple of CAT2/CAT1 bushings for the lift arm pins & top link connections on my attachments.
I can use this for moving 3 point equipment or using implements that don't need PTO, like the landscape blade/rake and I will probably also use it with the decked carryall for things like loading/unloading the truck.
This is what it looks like on the 1025R
... still got the Fedex sticker on it (no packaging other than wrapping the toplink bar & receiver crosspin wrapped in plastic & stuffed in the receiver & taped over). The Fedex guy was happy he could just push it off the back of the truck into the 1025R bucket. Shipping weight indicates 95 lb.
Toplink pin & keeper were shipped just installed in the toplink bracket. The Tri-ball mount was lying around unused since I went to a weight distributing hitch w/convert-a-ball.
Two sets of pins to accomodate a number of FEL's. It will also fit our 3038e 305 FEL.
It'll get stored where I can just drive in & pick it up with the FEL after dropping the bucket.