Anyone using an I-match on a frontier or nortac snowblower?
Results 1 to 4 of 4
Like Tree2Likes
  • 2 Post By JimR

Thread: Anyone using an I-match on a frontier or nortac snowblower?

  1. Top | #1

    Join Date
    Feb 2016
    Last Online
    10-16-2019 @ 09:18 PM
    Location
    Virginia
    Posts
    133
    Thanks
    1
    Thanked 18 Times in 16 Posts

    Anyone using an I-match on a frontier or nortac snowblower?

    Just curious if anyone has come up with a way to run a Imatch and a nortac snowblower.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Jun 2014
    Last Online
    Today @ 01:25 PM
    Location
    Berlin, MA
    Posts
    4,676
    Thanks
    95
    Thanked 880 Times in 674 Posts
    I use my iMatch hitch with my Frontier SB1164 without any problems. The NorTrac blowers have a clevis-style pin setup for the lift arm connections so I'm not sure if it will fit on a Quick Hitch. That's the only issue I see with using that setup. You could contact Northern Tool and ask if it's Quick Hitch compatible. They don't say either way on their site or in the manual.
    D160 Mower/Bagger.
    2014 2032R tractor/H130 FEL w/Bolt-On Hooks/54" Snow Plow/iMatch Quick-Hitch/County Line 5' Scraper blade/County Line Carry-All/Artillian 42" Forks & QH Adapter/JD Ballast Box/Frontier SB1164 3PH Blower/Leinbach PHD/Wallenstien BX42 Chipper

  4. Top | #3

    Join Date
    Jun 2014
    Last Online
    Today @ 01:25 PM
    Location
    Berlin, MA
    Posts
    4,676
    Thanks
    95
    Thanked 880 Times in 674 Posts
    Doh! Check that. I just noticed that on the 72" NorTrac model someone already asked Northern Tool and the response was that they are NOT Quick hitch compatible.
    1MOA and HVACguy like this.
    D160 Mower/Bagger.
    2014 2032R tractor/H130 FEL w/Bolt-On Hooks/54" Snow Plow/iMatch Quick-Hitch/County Line 5' Scraper blade/County Line Carry-All/Artillian 42" Forks & QH Adapter/JD Ballast Box/Frontier SB1164 3PH Blower/Leinbach PHD/Wallenstien BX42 Chipper

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    Plug Ugly's Avatar
    Join Date
    Nov 2016
    Last Online
    Today @ 08:18 AM
    Location
    NE Iowa
    Posts
    553
    Thanks
    13
    Thanked 98 Times in 76 Posts
    I use an Imatch on my Farm King blower. Which is the same as an Allied or Buhler.

  7. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •