Tips for running wires from battery to inside cab.
Results 1 to 4 of 4
Like Tree1Likes
  • 1 Post By Kennyd

Thread: Tips for running wires from battery to inside cab.

  1. Top | #1
    Dovetail's Avatar
    Join Date
    Mar 2018
    Last Online
    11-15-2019 @ 10:54 PM
    Location
    East Texas
    Posts
    44
    Thanks
    19
    Thanked 4 Times in 4 Posts

    Tips for running wires from battery to inside cab.

    Does anyone have some tips, and photos help, for running wires from the battery to inside the cab inserting a switch in one of the blanks for use with my 25 gallon sprayer? I'm undecided as to have sprayer leads located in the front, or rear of my 3000 series, both would both be better since I'm unsure about using the sprayer on a trailer, or strapped in the bucket? Is a kit available, I've searched the forum, but, I might be using incorrect terminology, or wording for help?

    Thanks, in advance
    New Green, 3046R cab, 60" deck, and FEL, soon to be departed Orange BX2200 60" deck, and FEL

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 10:49 AM
    Location
    Westminster, MD
    Posts
    16,604
    Thanks
    5,161
    Thanked 4,146 Times in 2,587 Posts
    I’m not sure it’s been discussed, but heres what I did:
    1) For the front camera I installed on the loader, I ran a 18/2 jacketed wire through one the of the grommets that surrounds one of the joystick cables. This also works for the wire from diverter kits from Artillian.
    2) For our rear 3rd SCV diverter Kit, we suggest entering through the wire harness grommet in the floorboard, it’s in the right rear corner.

    For temporary wires, there is grommet at the bottom of the rear window that can be removed.
    Attached Thumbnails Attached Thumbnails F0C75E16-655E-4DD6-967C-0555AADDE656.jpeg  
    OxPath likes this.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  4. The Following 2 Users Say Thank You to Kennyd For This Useful Post:

    Dovetail (12-18-2018), OxPath (12-18-2018)

  5. Top | #3
    Dovetail's Avatar
    Join Date
    Mar 2018
    Last Online
    11-15-2019 @ 10:54 PM
    Location
    East Texas
    Posts
    44
    Thanks
    19
    Thanked 4 Times in 4 Posts

    That helps!

    I was really hoping someone had a better solution than my 15 year old, rather amateurish set up on the rear of my old Kubota, other than plugging in the two leads? You lost me here---> For our rear 3rd SCV diverter Kit. I didn't think of using a shielded cable, thanks, and for the photo, I'll have to locate the plug!
    Attached Thumbnails Attached Thumbnails wire.jpg  
    New Green, 3046R cab, 60" deck, and FEL, soon to be departed Orange BX2200 60" deck, and FEL

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4

    Join Date
    Feb 2018
    Last Online
    06-17-2019 @ 02:42 PM
    Location
    Montana - East slopes of the Rockies
    Posts
    322
    Thanks
    38
    Thanked 34 Times in 30 Posts
    Quote Originally Posted by Dovetail View Post
    Does anyone have some tips, and photos help, for running wires from the battery to inside the cab inserting a switch in one of the blanks for use with my 25 gallon sprayer? I'm undecided as to have sprayer leads located in the front, or rear of my 3000 series, both would both be better since I'm unsure about using the sprayer on a trailer, or strapped in the bucket? Is a kit available, I've searched the forum, but, I might be using incorrect terminology, or wording for help?

    Thanks, in advance
    Both front and rear sound good. "Indecision is the key to flexibility."

    I'd fuse the positive (non grounded) sprayer lead as close to the battery as practical.

    Sent from my RCT6773W22 using Tapatalk
    2032R classic, H130 Loader, 46 Backhoe, 54" Snowblower,
    214 (1978), 46 mower with powerflow bagger, 31 tiller, 37A snow thrower
    some other stuff

  8. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •