My new tiller
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15
Like Tree35Likes

Thread: My new tiller

  1. Top | #1

    Join Date
    Oct 2018
    Last Online
    Today @ 07:09 AM
    Posts
    201
    Thanks
    0
    Thanked 15 Times in 15 Posts

    My new tiller

    I picked up my tiller yesterday and started working on it today. I think Im going to like it. The County Line 48 inch tiller is reversable so that was the first order of business. I had already checked out how to reverse it so it wasnt difficult, just heavy (591 lbs)! The pto box had to be removed and flipped over. A snap ring and washer had to be swapped to the opposite side. The drain plug and filler vent had to change places, then it was reinstalled. The hardest part was reversing the tine shaft, mainly because it is heavy. Id say it weighs in around 100 lbs. Getting it lined up and mated to the end flanges was tough on a cold stone floor. Once it was all back together I did the rest of the assembly, mostly braces and shields. All thats left to do tomorrow is tighten a few bolts, add the pto shaft and guard, and fill it with oil. I figured by firing it up everything in the boxes will be oil covered til I can use it... probably 3 months! Now I can take off the 3 pt carry all and put the weights back on, just in time for the big storm.
    Attached Thumbnails Attached Thumbnails received_224659611809172_1547694441840.jpeg   received_2141656679481120_1547694458021.jpeg   received_753112568408298_1547694470308.jpeg   received_2282410095370039_1547694501641.jpeg  
    Levi, mark02tj, keane and 10 others like this.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    DEERE1025R's Avatar
    Join Date
    Apr 2018
    Last Online
    05-20-2019 @ 08:09 AM
    Location
    Western PA
    Posts
    104
    Thanks
    26
    Thanked 13 Times in 7 Posts
    Looks heavy duty! Good luck with it and let us know how it does!

    2018 John Deere 1025R with R120 FIL
    54" auto connect MMM
    53" upgrade bucket
    BIO Filled rear tires
    John Deere wheel weights
    Frontier Box Blade BB5048
    Land Pride RTA 1250 Tiller
    CID JD Green 42" pallet forks
    John Deere Imatch
    Heavy Hitch with Dual weight bracket JD Green
    3 in 1 Trailer tow heavy hitch
    Heavy Hitch Tooth bar
    Kens bolt on hooks
    Kens bolt on differential pedal
    Kens pear shaped chain shortener
    R2 MFG 3" Edge tamers
    Loader tube caps- round and square.

  4. Top | #3

    Join Date
    Dec 2013
    Last Online
    Yesterday @ 07:29 PM
    Location
    Southwest Ohio
    Posts
    3,512
    Thanks
    1,232
    Thanked 837 Times in 606 Posts
    Looks good and congrats on getting what you wanted!

    I had to look twice at the first picture. I thought "what the heck kind of tiller mount is that???" and then realized you had it on your carryall. I'd better start drinking stronger coffee in the mornings!
    PJR832 likes this.
    '05 JD 3520 Open Station w/ 300CX FEL
    Grandpa's '52 Farmall Cub
    A couple of old Gravelys
    Help a Vet and his dog

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    Cutty72's Avatar
    Join Date
    Jan 2017
    Last Online
    11-07-2019 @ 04:12 PM
    Location
    ND
    Posts
    1,325
    Thanks
    43
    Thanked 122 Times in 109 Posts
    I'm sure you'll love it!
    PJR832 likes this.
    2010 2320 with 200cx FEL
    54D MMM
    54" front mount blower
    Titan 42" forks w/ receiver hitch
    County Line 5' tiller
    6' JD rear blade (tree find)

  7. Top | #5
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Yesterday @ 10:31 PM
    Location
    Central New York
    Posts
    11,589
    Thanks
    1,936
    Thanked 1,594 Times in 1,309 Posts
    Quote Originally Posted by mark02tj View Post
    Looks good and congrats on getting what you wanted!

    I had to look twice at the first picture. I thought "what the heck kind of tiller mount is that???" and then realized you had it on your carryall. I'd better start drinking stronger coffee in the mornings!


    That's a good tiller, I'm sure you will be happy.
    mark02tj and Herminator like this.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  8. Top | #6

    Join Date
    Oct 2018
    Last Online
    Today @ 07:09 AM
    Posts
    201
    Thanks
    0
    Thanked 15 Times in 15 Posts
    Finally got it all finished up today. Added gear oil and had to take about 4 inches off the pto shaft. Its tight quarters putting it on but all set. I expected it to clatter like the snow blower does but its very tight, quiet, and smooth. I ran it up to 540 but didnt put it in the ground. Disconnected it in the shop where it can sit til April. I put my Heavy Hitch and weights back on so now Im all set for the snow storm...but looking forward to tilling weather!
    Attached Thumbnails Attached Thumbnails received_277657572914365_1547855924480.jpeg  
    Levi, Tractor Tim, Jeff B and 1 others like this.

  9. Top | #7
    Superglidesport's Avatar
    Join Date
    Dec 2011
    Last Online
    Yesterday @ 09:50 PM
    Location
    Littleton, MA
    Posts
    7,733
    Thanks
    697
    Thanked 1,586 Times in 996 Posts
    Quote Originally Posted by Hiwire View Post
    Finally got it all finished up today. Added gear oil and had to take about 4 inches off the pto shaft. Its tight quarters putting it on but all set. I expected it to clatter like the snow blower does but its very tight, quiet, and smooth. I ran it up to 540 but didnt put it in the ground. Disconnected it in the shop where it can sit til April. I put my Heavy Hitch and weights back on so now Im all set for the snow storm...but looking forward to tilling weather!
    Good luck with your new tool! I've got its big brother, the 60" wide version. It's fitted to both the 3320 and the 2032R and luckily the driveshaft length works equally well with either rig.
    Levi, Herminator and PJR832 like this.
    John Deere 3320
    eHydro, R4's, 300CX Loader, 61" HD Bucket
    JD Tooth Bar, Deluxe Hood Guard, Ken's Bolt-on Hooks
    485 Backhoe w. 18" HD Bucket
    Mid-PTO, Front 3 Point Hitch, 366 Front Blade
    Tarter 5' 3PH Tiller
    Frontier AP12F Forks

    John Deere 2032R
    R3's, 220R Loader, 57" HD Bucket
    Curtis Hard Side Cab & Heater
    62D Deck, iMatch Quick Hitch
    54 Snowblower
    Super HeavyHitch
    Little Wonder "Optimax" & JRCO Blower Buggy
    Fimco 60 Gallon 3PH Boomless Sprayer w. PTO Pump

  10. Top | #8

    Join Date
    Oct 2018
    Last Online
    Today @ 07:09 AM
    Posts
    201
    Thanks
    0
    Thanked 15 Times in 15 Posts
    Have you reversed it? If so, were you happy with the difference?

  11. Top | #9

    Join Date
    Apr 2016
    Last Online
    Today @ 12:38 AM
    Location
    Minnesota
    Posts
    1,250
    Thanks
    20
    Thanked 84 Times in 80 Posts
    Quote Originally Posted by Hiwire View Post
    Have you reversed it? If so, were you happy with the difference?
    He just got it and it's winter...
    PJR832 and Jet Dr. like this.

  12. Top | #10
    Jet Dr.'s Avatar
    Join Date
    May 2018
    Last Online
    11-11-2019 @ 08:01 AM
    Location
    Ridgeland SC
    Posts
    248
    Thanks
    11
    Thanked 15 Times in 14 Posts
    Quote Originally Posted by Hiwire View Post
    Have you reversed it? If so, were you happy with the difference?
    Guess you did not read his entire first post?
    PJR832 likes this.
    2018 3046R - Deluxe Cab, air ride seat, R4 tires, 3rd ESCV, diverter valve with 4th and 5th SCV's, mid PTO, 72D autoconnect MMM with independent lift, power beyond, 375A backhoe, 320R loader with 3rd function lines, L&R external mirrors, Frontier 60" 4 in 1 bucket and factory stereo with dedicated Sirius tuner.

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •