Lp1160 vs lp1060l
Results 1 to 9 of 9
Like Tree3Likes
  • 1 Post By jgayman
  • 1 Post By IndianaJim
  • 1 Post By Twar

Thread: Lp1160 vs lp1060l

  1. Top | #1

    Join Date
    Jul 2018
    Last Online
    Yesterday @ 11:29 PM
    Location
    US
    Posts
    52
    Thanks
    2
    Thanked 7 Times in 4 Posts

    Lp1160 vs lp1060l

    For a 2025r which would be better? Both are 3 point lift. The 1060 is around 100lbs lighter but the scraper blades are only .25" thick vs .50" on the 1160. Dealer is trying to push the 1060 but I am hesitant. Any feedback from users of either?



    Thanks

    Sent from my Pixel 2 using Tapatalk

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 11:02 PM
    Location
    Central Pennsylvania
    Posts
    10,294
    Thanks
    371
    Thanked 1,702 Times in 1,289 Posts
    According to the Deere website the LP1060L is designed for Limited Cat-1 3PH whereas the LP1160 is designed for full Cat-1. According to the 2025R owner's manual - the 3PH is rated at Limited Cat-1.

    The LP1060L appears to be rated for 30HP max whereas the LP1160 is 18-50HP.

    I was curious what the 3PH supports look like on the L-version. While the LP1060L is supposed to be 3PH attachable, every photo I can find of it shows it as a pull-type with a hitch ball and wheels.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  4. Top | #3
    ErikR's Avatar
    Join Date
    Jan 2015
    Last Online
    Yesterday @ 11:43 PM
    Location
    Northern WI
    Posts
    719
    Thanks
    28
    Thanked 208 Times in 127 Posts
    Only pic I could find....


    Click image for larger version. 

Name:	deerelp.JPG 
Views:	67 
Size:	117.1 KB 
ID:	674142
    2014 1025R, H120 loader w/53" bucket and Heavy Hitch Tooth Bar, 54" Auto Connect MMM, 47" QH snow blower, Ballast box and loaded rear tires, Speeco Quick Hitch, Ken's Bolt-on Grab Hooks, King Kutter Carry All, 54" front QH blade w/Heavy Hitch skids, Titan 36" pallet forks, Land Pride GS0560 Grading Scraper, and chrome (kitchen drain pipe) exhaust tip!!

    1950 Allis-Chalmers B, Electric start, PTO, Belt Pulley, Hydraulic pump. Stuck engine (a work in progress)

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 11:02 PM
    Location
    Central Pennsylvania
    Posts
    10,294
    Thanks
    371
    Thanked 1,702 Times in 1,289 Posts
    Quote Originally Posted by ErikR View Post
    Only pic I could find....


    I found that one too. It's actually a LP1048L but we can probably assume the 1060L is constructed the same.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  7. Top | #5

    Join Date
    Jul 2018
    Last Online
    Yesterday @ 11:29 PM
    Location
    US
    Posts
    52
    Thanks
    2
    Thanked 7 Times in 4 Posts
    The lp1160 appears to have a more tubular frame with higher sides. It also looks like it has 2 pin locations for different height 3 point lifts.




    Sent from my Pixel 2 using Tapatalk

  8. Top | #6
    IndianaJim's Avatar
    Join Date
    Feb 2013
    Last Online
    Today @ 12:09 AM
    Location
    Indiana
    Posts
    1,467
    Thanks
    24
    Thanked 200 Times in 153 Posts
    Frontier 5' Land Plane (LP1060)


    Thats not a 3-point hitch attachable unit...unless there is a different LP1060.

    If the price isnt too crazy in difference, Id go with the LP1160. With two sets of mounting holes, you should have no trouble.

    While Deere does list the 2025Rs 3-point as a "Limited" Cat 1, in the physical sense it isnt. Size wise, its a standard Cat 1. The only "Limited" portion of the hitch is lift height, and that can be easily remedied by adding a second adjustable link on the other side. Capacity wise, its the same or better than several older tractors with full Cat 1 hitches.
    Jim B.

    318, 49 Thrower, 2 80 Carts, 17AT cart, 54 Blade, 12" Brinly Plow, 30 Hydraulic Tiller w/extension & Briney 3-Pt hitch, 50 deck w/JRCO Cart Bagger.
    2025R, 120R loader w/Kens Bolt On Hooks, 260B backhoe w/8" & 16" buckets, Titan 36" forks, Imatch hitch, Weight Bracket/Hitch.

    Exmark Lazer Z HP 52"
    Husqvarna 550XP, 562XP, 55 Rancher

  9. Top | #7
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 11:02 PM
    Location
    Central Pennsylvania
    Posts
    10,294
    Thanks
    371
    Thanked 1,702 Times in 1,289 Posts
    Quote Originally Posted by IndianaJim View Post
    Frontier 5' Land Plane (LP1060)


    Thats not a 3-point hitch attachable unit...unless there is a different LP1060.

    If the price isnt too crazy in difference, Id go with the LP1160. With two sets of mounting holes, you should have no trouble.

    While Deere does list the 2025Rs 3-point as a "Limited" Cat 1, in the physical sense it isnt. Size wise, its a standard Cat 1. The only "Limited" portion of the hitch is lift height, and that can be easily remedied by adding a second adjustable link on the other side. Capacity wise, its the same or better than several older tractors with full Cat 1 hitches.
    As with all things JD, they have to throw in a bit of confusion factor with the marketing information. In the chart below you can see where the LP1060L is indeed for a 3PH. The LP1060 (non-L) is a pull-type with a ball. Most of the photos of these smaller land planes seem to be of the pull-type.

    Attached Thumbnails Attached Thumbnails Land_Planes.jpg  
    IndianaJim likes this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  10. Top | #8
    IndianaJim's Avatar
    Join Date
    Feb 2013
    Last Online
    Today @ 12:09 AM
    Location
    Indiana
    Posts
    1,467
    Thanks
    24
    Thanked 200 Times in 153 Posts
    Quote Originally Posted by jgayman View Post
    As with all things JD, they have to throw in a bit of confusion factor with the marketing information. In the chart below you can see where the LP1060L is indeed for a 3PH. The LP1060 (non-L) is a pull-type with a ball. Most of the photos of these smaller land planes seem to be of the pull-type.
    I probably should have know something was up when I found a picture so easily,

    That changes things a bit.
    If the LP1060 isnt going to be used a ton, it might be worth saving money on it. The thinner cutting edges will wear out quicker, so replacement cost should likely be factored in and compared to the heavier built one, but as long as the width of the mounting frame will work with a quick hitch (and it looks like it should), Im all for saving money where I can!

    I did find a Frontier PDF online that said "LP10 series pull type land planes" and "LP11 series land planes are 3-point hitch mounted", but it doesnt say when it was printed.
    But Deeres own release shows one mounted to the 2025R. Deere unveils latest Frontier Attachments, Land Planes (pictures at the end, scroll through for the land plane). This also indicates it should work just fine with the Imatch, since its mounted to one!
    jgayman likes this.
    Jim B.

    318, 49 Thrower, 2 80 Carts, 17AT cart, 54 Blade, 12" Brinly Plow, 30 Hydraulic Tiller w/extension & Briney 3-Pt hitch, 50 deck w/JRCO Cart Bagger.
    2025R, 120R loader w/Kens Bolt On Hooks, 260B backhoe w/8" & 16" buckets, Titan 36" forks, Imatch hitch, Weight Bracket/Hitch.

    Exmark Lazer Z HP 52"
    Husqvarna 550XP, 562XP, 55 Rancher

  11. Top | #9

    Join Date
    Jul 2018
    Last Online
    Yesterday @ 11:29 PM
    Location
    US
    Posts
    52
    Thanks
    2
    Thanked 7 Times in 4 Posts
    Talked through it with my dealer. I have more gravel to maintain than he thought.

    Going with the lp1160. I can always adjust the aggressiveness with the top link.



    Sent from my Pixel 2 using Tapatalk
    jgayman likes this.

  12. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Similar Threads

  1. Frontier Land Plane LP1160
    By Kevin0704 in forum Implements & Attachments
    Replies: 25
    Last Post: 10-28-2018, 11:56 AM
  2. 1025R FILB vs 2720/2032R TLB vs 3x20 TLB (Tractor Loader Backhoe) vs 110 TLB or 4x20
    By quatro2b in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 18
    Last Post: 03-18-2017, 12:11 AM
  3. X750 vs 455 vs 445 vs 318 vs ?
    By Brian in forum Lawn & Garden Tractors
    Replies: 19
    Last Post: 09-13-2013, 12:18 AM
  4. Replies: 11
    Last Post: 04-01-2012, 12:34 AM
  5. Trailer axles- slipper spring vs. shackle (eye) spring vs. torsion
    By Brian in forum Trucks, Trailers, & Towing
    Replies: 10
    Last Post: 06-22-2011, 04:24 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •