411!! I need your help about adding a backhoe to my 1025R
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 26
Like Tree49Likes

Thread: 411!! I need your help about adding a backhoe to my 1025R

  1. Top | #1
    USAFRet's Avatar
    Join Date
    Jun 2017
    Last Online
    Yesterday @ 12:07 PM
    Location
    Northwood,NH
    Posts
    190
    Thanks
    6
    Thanked 12 Times in 12 Posts

    411!! I need your help about adding a backhoe to my 1025R

    Okay I know I should have gotten the backhoe when I purchased it but I screwed up.

    So for the past two years I have been searching for one and finally I found one 260 for $3000 and just an hour away.

    I contacted my dealer and asked what the kit would cost and was told about $2200 installed as I all ready have the power beyond on it. (I thought if I changed my mine then it would be on it)

    I am suppose to go and pickup the backhoe Saturday but when I got home my dealer called and told me he cannot order the kit! He says John does not allow him to sell the two major brackets... what the he.....


    Has anyone else on here actually put a backhoe on after they purchased it? I know there are other dealers on here and techs so please help my broken heart and tell me my dealer is just confused.


    Thanks for your help.


    2017 1025R with turf tires
    H120 FEL with 53" Bucket Quick Change
    54" Autoconnect Mower, mulch kit and hyd mower lift
    54" Quick-Hitch Two Stage Snow Blower Hyd Rotator with Remote Spout Cap kit
    Ballast box with tubes
    IMatch
    Engine blanket
    LED lights
    Ken's Bolt on Hooks and rear hitch
    Country Time/Tarter 48" Tiller
    Titan carriage & 42" forks




    PS Everyone knows what a 1025R looks like so my Avatar is a picture of my two girls!!!

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    fdmars's Avatar
    Join Date
    Feb 2011
    Last Online
    Today @ 03:29 PM
    Location
    Mid CT
    Posts
    2,076
    Thanks
    164
    Thanked 213 Times in 155 Posts
    I know of the backhoe of which you speak, as I inquired about it. I wonder why and or if the seller has the frame you seek. Unless your and his tractor are different. Perhaps you should ask him?
    kylew and HVACguy like this.
    2009 JD 2305 w/ Femco folding ROPS,Power Beyond Kit, KBOH, 54"MMM, 47" Snowblower, 200CX Loader w/ BB, Powerhorse 12 ton Logsplitter and King Kutter tool carrier and 17P kart
    2009 Cub Cadet/Yanmar ex3200, Land Pride 60” land plane and 60” finish mower, worksaver posthole digger w/ 9” auger, “The thumb” add on grapple, third function valve and KBOH of course

  4. Top | #3
    Senior GTT Super Slacker Gizmo2's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 03:44 PM
    Location
    New York
    Posts
    34,447
    Thanks
    5,847
    Thanked 3,991 Times in 2,948 Posts
    I was to believe there is no bracket needed for the BH. I'm I missing something?
    Keith

    JD 2320, 200CX FEL/61" bucket , 46 BH/16" bucket, Artillian Forks, 72" Snow Blade, Landscape Rake, Ballast Box, PHD,
    BX42 Chipper, XUV 560 Gator, Z915B ZTrak

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    kylew's Avatar
    Join Date
    Jan 2018
    Last Online
    Today @ 02:44 AM
    Location
    Grass Lk, Michigan
    Posts
    1,249
    Thanks
    214
    Thanked 268 Times in 223 Posts
    Quote Originally Posted by Gizmo2 View Post
    I was to believe there is no bracket needed for the BH. I'm I missing something?
    Probably the sub-frame kit, or a part of it.
    Gizmo2 likes this.
    🌠Back in my day we had 9 planets🌠

    2014 1025R TLB
    60D AutoConnect Mower●H120 Loader●260 Backhoe●BB2048 Box Blade●RB2060L Back Blade●RC2048 Rotary Cutter●JD 60" Quick Hitch Plow Blade●Ken's Bolt-on Hooks●Ken's Diff Pedal●Ken's I-Match Hook●Ken's Backhoe Steps●Titan 42" Forks w/Headache Rack●Titan Ballast Box●Titan Toothbar w/23WTL Tiger Teeth●3" Edge Tamers●BXpanded 6" Bucket, Ripper & Bucket Quick Change●This & That Mods●Other Stuff I Forgot About●

    The Mrs. has 2014 X360

  7. Top | #5
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 03:33 PM
    Location
    Central Pennsylvania
    Posts
    10,031
    Thanks
    371
    Thanked 1,660 Times in 1,257 Posts
    You should be able to order any needed components as “parts” although the cost may be higher than the equivalent sales kit.
    kylew likes this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  8. Top | #6
    Senior GTT Super Slacker Gizmo2's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 03:44 PM
    Location
    New York
    Posts
    34,447
    Thanks
    5,847
    Thanked 3,991 Times in 2,948 Posts
    Quote Originally Posted by kylew View Post
    Probably the sub-frame kit, or a part of it.
    I thought the BH hooked on to the 3 point hitch bar?
    kylew likes this.
    Keith

    JD 2320, 200CX FEL/61" bucket , 46 BH/16" bucket, Artillian Forks, 72" Snow Blade, Landscape Rake, Ballast Box, PHD,
    BX42 Chipper, XUV 560 Gator, Z915B ZTrak

  9. Top | #7
    Senior GTT Super Slacker Gizmo2's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 03:44 PM
    Location
    New York
    Posts
    34,447
    Thanks
    5,847
    Thanked 3,991 Times in 2,948 Posts
    kylew likes this.
    Keith

    JD 2320, 200CX FEL/61" bucket , 46 BH/16" bucket, Artillian Forks, 72" Snow Blade, Landscape Rake, Ballast Box, PHD,
    BX42 Chipper, XUV 560 Gator, Z915B ZTrak

  10. Top | #8

    Join Date
    Sep 2015
    Last Online
    Yesterday @ 09:46 PM
    Location
    Burton, Ohio
    Posts
    2,757
    Thanks
    542
    Thanked 440 Times in 348 Posts
    God awful pricey trying to buy a few parts from Deere when people don't sell a guy the complete package...
    Last edited by Jeff B; 05-10-2019 at 07:05 PM.
    kylew likes this.
    1025R FILB, vintage: 2015
    54D MM mowing deck
    Imatch hitch
    2 inch receiver for three point
    "18" cart
    Piranha Tooth Bar
    Ken's hooks and differential lock pedal
    Artillian 36" forks
    Stihl equipment: Saws; MS261C, MS462C, MS661RCM and Blower; BR600 and Trimmer; FS70R and Hedge Cutter; HL 56K and Pressure Washer; RB400
    Husky log splitter

  11. Top | #9
    kylew's Avatar
    Join Date
    Jan 2018
    Last Online
    Today @ 02:44 AM
    Location
    Grass Lk, Michigan
    Posts
    1,249
    Thanks
    214
    Thanked 268 Times in 223 Posts
    This is what I was thinking. Part number BLV10835. Here's the link to the catalog. It's not in the main 1025 catalog, but a 'sub-catalog' if you scroll down once you get in the 1025 catalog. Stumbled across it a few weeks ago.

    John Deere Parts Catalog

    Click image for larger version. 

Name:	260 BH Subframe & seat kit.png 
Views:	20 
Size:	329.5 KB 
ID:	685402
    Gizmo2 likes this.
    🌠Back in my day we had 9 planets🌠

    2014 1025R TLB
    60D AutoConnect Mower●H120 Loader●260 Backhoe●BB2048 Box Blade●RB2060L Back Blade●RC2048 Rotary Cutter●JD 60" Quick Hitch Plow Blade●Ken's Bolt-on Hooks●Ken's Diff Pedal●Ken's I-Match Hook●Ken's Backhoe Steps●Titan 42" Forks w/Headache Rack●Titan Ballast Box●Titan Toothbar w/23WTL Tiger Teeth●3" Edge Tamers●BXpanded 6" Bucket, Ripper & Bucket Quick Change●This & That Mods●Other Stuff I Forgot About●

    The Mrs. has 2014 X360

  12. Top | #10
    kylew's Avatar
    Join Date
    Jan 2018
    Last Online
    Today @ 02:44 AM
    Location
    Grass Lk, Michigan
    Posts
    1,249
    Thanks
    214
    Thanked 268 Times in 223 Posts
    USAFRet....didn't you need the 260 bh & not the 260B? The BLV10835 kit is what I think you need. Is that what you checked with your dealer for?
    Gizmo2 likes this.
    🌠Back in my day we had 9 planets🌠

    2014 1025R TLB
    60D AutoConnect Mower●H120 Loader●260 Backhoe●BB2048 Box Blade●RB2060L Back Blade●RC2048 Rotary Cutter●JD 60" Quick Hitch Plow Blade●Ken's Bolt-on Hooks●Ken's Diff Pedal●Ken's I-Match Hook●Ken's Backhoe Steps●Titan 42" Forks w/Headache Rack●Titan Ballast Box●Titan Toothbar w/23WTL Tiger Teeth●3" Edge Tamers●BXpanded 6" Bucket, Ripper & Bucket Quick Change●This & That Mods●Other Stuff I Forgot About●

    The Mrs. has 2014 X360

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Adding a backhoe to a 1025r
    By Nebels deere in forum Implements & Attachments
    Replies: 10
    Last Post: 05-10-2017, 07:49 AM
  2. Going To Buy a 1025r, Need Help Deciding on Backhoe...
    By match in forum Sub Compact Utility Tractors (SCUT)
    Replies: 35
    Last Post: 01-26-2017, 10:07 AM
  3. Replies: 66
    Last Post: 12-27-2016, 08:32 PM
  4. Adding Backhoe to 1025r
    By FC2301 in forum Sub Compact Utility Tractors (SCUT)
    Replies: 17
    Last Post: 11-26-2016, 08:19 AM
  5. Replies: 18
    Last Post: 01-05-2016, 08:13 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •