Artillian??
Results 1 to 7 of 7
Like Tree9Likes
  • 1 Post By tdhanses
  • 7 Post By Kennyd
  • 1 Post By tdhanses

Thread: Artillian??

  1. Top | #1

    Join Date
    Aug 2018
    Last Online
    Today @ 03:30 PM
    Posts
    65
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Can you leave the pallet forks on and still attach a grapple in the middle section for a single grab setup? 36” forks is what I’m thinking. Or do you have to get the side rake pieces?
    FortClatsop likes this.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Jun 2014
    Last Online
    Today @ 02:41 PM
    Location
    Berlin, MA
    Posts
    4,667
    Thanks
    95
    Thanked 880 Times in 674 Posts
    The basic grapple comes with one rake attached from the factory. The side rakes aren't required. They are optional. I suspect what you mean is to use the forks in place of teh side rakes. I suppose you could remove one fork, slide the grapple on and then put the fork back on again and that would work. It may have some limitations as far as picking thing s up from directly above though. The forks extend out farther than the rakes do.
    D160 Mower/Bagger.
    2014 2032R tractor/H130 FEL w/Bolt-On Hooks/54" Snow Plow/iMatch Quick-Hitch/County Line 5' Scraper blade/County Line Carry-All/Artillian 42" Forks & QH Adapter/JD Ballast Box/Frontier SB1164 3PH Blower/Leinbach PHD/Wallenstien BX42 Chipper

  4. Top | #3

    Join Date
    Aug 2018
    Last Online
    Today @ 03:30 PM
    Posts
    65
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Yeah I’m thinking more for demolition of old out buildings but you are correct. So if you order only a grapple section a free side comes with? Say you had the fork setup already and then ordered only the grapple section to add to it.

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 02:27 PM
    Location
    Westminster, MD
    Posts
    16,417
    Thanks
    5,048
    Thanked 4,081 Times in 2,547 Posts
    Yes, it's possible, I've done it to show someone here on GTT before the grapple sit's much higher than the forks, so I'm not sure how effective either would be.
    Attached Thumbnails Attached Thumbnails IMG_5252.JPG   IMG_5253.JPG   IMG_5254.JPG  
    Tomfive, rtgt, jdforever and 4 others like this.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  7. The Following 2 Users Say Thank You to Kennyd For This Useful Post:

    FortClatsop (05-20-2019), mark02tj (05-19-2019)

  8. Top | #5

    Join Date
    Aug 2018
    Last Online
    Today @ 03:30 PM
    Posts
    65
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by Kennyd View Post
    Yes, it's possible, I've done it to show someone here on GTT before the grapple sit's much higher than the forks, so I'm not sure how effective either would be.
    Thanks! Exactly what I wanted to see, doesn’t look like an effective setup.
    FortClatsop likes this.

  9. Top | #6

    Join Date
    Dec 2015
    Last Online
    Today @ 06:36 AM
    Location
    North Carolina
    Posts
    1,278
    Thanks
    72
    Thanked 174 Times in 161 Posts
    Quote Originally Posted by tdhanses View Post
    Thanks! Exactly what I wanted to see, doesn’t look like an effective setup.
    No, it is not.

    If you want it for demo just order the grapple or get a double lid set up. I have the grapple and two rakes. I currently do not mount my rakes because the locking keys departed this life and the side rakes became a PIA without them. Just using the grapple works fine. I think you do lose a little bit of functionality if you are trying to do any raking of debris because instead of 40+ inches of rake you just have one section of rake mounted on the grapple so it's quite narrow.
    3025e, D160 loader, Artillian Grapple, Forks, Hoe Bucket, Frontier Land Plane, Rotomec PDH300, Redline Systems 54 inch rock bucket, Heavy Hitch
    400 Garden Tractor, 35a Tiller, 54 inch plow, 60 inch deck

  10. Top | #7

    Join Date
    Aug 2018
    Last Online
    Today @ 03:30 PM
    Posts
    65
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Yeah now I’m back to considering the EA wicked setup, lol. Decisions.

  11. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Similar Threads

  1. Artillian adapters with non-Artillian frame
    By sblj52 in forum Implements & Attachments
    Replies: 3
    Last Post: 10-30-2014, 01:05 PM
  2. Artillian Pallet Forks for the Loader
    By RandyM in forum Implements & Attachments
    Replies: 24
    Last Post: 08-15-2011, 08:09 AM
  3. Replies: 4
    Last Post: 01-11-2011, 06:37 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •