60” Tiller for 2320?
Results 1 to 7 of 7
Like Tree7Likes
  • 1 Post By JimR
  • 2 Post By EBhunts
  • 2 Post By Cutty72
  • 1 Post By Yank
  • 1 Post By Gebada22

Thread: 60” Tiller for 2320?

  1. Top | #1
    duwem's Avatar
    Join Date
    Jan 2014
    Last Online
    10-01-2019 @ 08:09 AM
    Location
    WI
    Posts
    334
    Thanks
    1
    Thanked 31 Times in 20 Posts

    60” Tiller for 2320?

    Back wheels are 53” overall width. 54” might make the most sense but if I found a 60” would that be too much power consumption for the tractor?
    70 w/ Custom 8hp Briggs and Hydrostatic Rearend
    70 no engine
    '74 140 H-3 w/ HD Air Cleaner, 3pt
    332 Custom Turbocharged and 2 Speed Swap
    345-the Grass Cutter w/ Powerflow Bagger
    2009 2320 w/ 200CX & 53" bucket 54 SnowBlower Artillian 42" forks

    3pt York Rake, Brinly 8 10 and 12" sleeve hitch & 3pt plows, 3pt Tandem Disk, Toolbar, A-Frame w/ Forks. Haban Flail Mower & Sickle Mower (140-332), Mott T38 Flail Mower, Custom MD Fab 3pt Plow and 2 Bottom Disk Plow, 3pt box blade, 42" Hyd Tiller

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Jun 2014
    Last Online
    Today @ 05:37 PM
    Location
    Berlin, MA
    Posts
    4,676
    Thanks
    95
    Thanked 880 Times in 674 Posts
    Most of the 60" tillers spec out 20-25 PTO HP as a minimum. If my mind isn't totally shot, your machine is just below that with like 17 or 18 HP at the PTO (Lemme know if I missed the mark on that!)

    You might be able to get away with running 60" though. You'd probably run into issue if you try to drop it 8" deep into ground that hasn't been tilled before. You'd have to attack it bit by bit. Till up 2"-3" and then go back and drop down deeper on a 2nd (or 3rd!) pass. If the price is right it might be worth it.
    PJR832 likes this.
    D160 Mower/Bagger.
    2014 2032R tractor/H130 FEL w/Bolt-On Hooks/54" Snow Plow/iMatch Quick-Hitch/County Line 5' Scraper blade/County Line Carry-All/Artillian 42" Forks & QH Adapter/JD Ballast Box/Frontier SB1164 3PH Blower/Leinbach PHD/Wallenstien BX42 Chipper

  4. Top | #3
    duwem's Avatar
    Join Date
    Jan 2014
    Last Online
    10-01-2019 @ 08:09 AM
    Location
    WI
    Posts
    334
    Thanks
    1
    Thanked 31 Times in 20 Posts
    Tractor data says 18hp pto. 24hp engine.

    Looks like the Deere 655 tiller is 55” that might work well.
    Last edited by duwem; 05-31-2019 at 10:37 PM.
    70 w/ Custom 8hp Briggs and Hydrostatic Rearend
    70 no engine
    '74 140 H-3 w/ HD Air Cleaner, 3pt
    332 Custom Turbocharged and 2 Speed Swap
    345-the Grass Cutter w/ Powerflow Bagger
    2009 2320 w/ 200CX & 53" bucket 54 SnowBlower Artillian 42" forks

    3pt York Rake, Brinly 8 10 and 12" sleeve hitch & 3pt plows, 3pt Tandem Disk, Toolbar, A-Frame w/ Forks. Haban Flail Mower & Sickle Mower (140-332), Mott T38 Flail Mower, Custom MD Fab 3pt Plow and 2 Bottom Disk Plow, 3pt box blade, 42" Hyd Tiller

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    EBhunts's Avatar
    Join Date
    Jul 2016
    Last Online
    Today @ 06:20 PM
    Location
    Northern WI
    Posts
    117
    Thanks
    18
    Thanked 50 Times in 27 Posts
    I run a 60” King Kutter on my Gen 1 2025R which is the same tractor. I also have 3 inch wheel spacers on the rear...I have no problem running the tiller to its max depth BUT it all depends on your soil conditions. For me it’s topsoil in food plots so I’m sure if you were trying to tackle virgin clay you could have very different results.



    Sent from my iPad using Tapatalk
    JimR and PJR832 like this.
    -2015 John Deere 2025R
    w/R4's and 2.5 " wheel spacers front and rear, FEL, Imatch QH, Ballast Box
    270 A backhoe

  7. Top | #5
    Cutty72's Avatar
    Join Date
    Jan 2017
    Last Online
    Today @ 01:05 PM
    Location
    ND
    Posts
    1,311
    Thanks
    43
    Thanked 120 Times in 107 Posts
    60" County Line on mine, no issues.

    Easily break sod in my local sandy soil.
    Clay/loam back at the farm slowed me down a touch when prepping area for new trees, but still handled it.
    Most of the time I'm not even running full RPM.
    It's a hydro, just slow down a bit and it handles it fine!
    Attached Thumbnails Attached Thumbnails tilled garden May 2017.jpg  
    EBhunts and PJR832 like this.
    2010 2320 with 200cx FEL
    54D MMM
    54" front mount blower
    Titan 42" forks w/ receiver hitch
    County Line 5' tiller
    6' JD rear blade (tree find)

  8. Top | #6
    Yank's Avatar
    Join Date
    Sep 2017
    Last Online
    Today @ 05:51 PM
    Location
    Southwest VA
    Posts
    1,034
    Thanks
    231
    Thanked 190 Times in 119 Posts
    Quote Originally Posted by EBhunts View Post
    I run a 60” King Kutter on my Gen 1 2025R which is the same tractor. I also have 3 inch wheel spacers on the rear...I have no problem running the tiller to its max depth BUT it all depends on your soil conditions. For me it’s topsoil in food plots so I’m sure if you were trying to tackle virgin clay you could have very different results.



    Sent from my iPad using Tapatalk
    That is some beautiful dirt you have.
    PJR832 likes this.
    Yancey

    2017 2038R 220R loader
    Frontier 72” rear blade
    Frontier 60” box blade
    Frontier 65” tiller
    Frontier subsoiler
    Frontier 60” landplane
    Frontier 42” pallet forks
    Frontier 72” RC 2072
    HH toothbar KBOH’s bucket hooks
    2019 X758 60HC deck
    Model 80 trailer

  9. Top | #7
    Gebada22's Avatar
    Join Date
    Apr 2015
    Last Online
    Today @ 01:33 PM
    Location
    West Michigan
    Posts
    319
    Thanks
    139
    Thanked 35 Times in 29 Posts
    Ditto the 60" CountryLine tiller for me as well. First pass is usually a little shallower, but once opened up it digs really well.
    Good luck.
    Last edited by Gebada22; 06-05-2019 at 10:20 AM.
    PJR832 likes this.
    John Deere 2011 2320, 200CX FEL, JD 46 BH, IMatch, RC1048, Countryline 6' Back Blade, Countryline 5' Rototiller, Ken's Bolt on Hooks, JD Ballast Box, Artillian Pallet forks, Grapple and Diverter, Bro-Tek Wheel Spacers, ROPS Warning Flag, Millcreek 63" Aerator, JD 21 Utility Trailer, 6ft Brillion Cultipacker.
    John Deere 2004 325
    John Deere 2017 X590

  10. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •