Tooth Bar for 4 in 1 Bucket
Results 1 to 6 of 6
Like Tree10Likes
  • 2 Post By DavidL
  • 1 Post By Ortimber
  • 2 Post By EVT
  • 2 Post By Gwizz
  • 2 Post By rtgt
  • 1 Post By DavidL

Thread: Tooth Bar for 4 in 1 Bucket

  1. Top | #1

    Join Date
    Jul 2019
    Last Online
    08-01-2019 @ 09:34 AM
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Tooth Bar for 4 in 1 Bucket

    I have a JD 3039R with an AY11H 4 in 1 bucket. Does anyone other than JD make tooth bar for it

    The JD p/n is 5FP10642 and is ~$700, which seems way out of line. Any suggestions other than making one myself?


    Thanks,
    David
    rtgt and PJR832 like this.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Ortimber's Avatar
    Join Date
    Feb 2017
    Last Online
    Yesterday @ 08:45 PM
    Location
    SW Oregon
    Posts
    140
    Thanks
    2
    Thanked 18 Times in 16 Posts

    Tooth Bar for 4 in 1 Bucket

    There should be many companies that make tooth bars that will fit your machine, unless your cutting edge is significantly different than a standard bucket. Piranha comes to mind, possibly Artillian.


    Sent from my iPhone using Tapatalk
    Last edited by Ortimber; 07-18-2019 at 07:42 AM.
    rtgt likes this.
    JD 5052R
    JD 5100M
    JD 835M XUV
    JD 650G Dozer
    Kubota KX-057
    Kubota ZD1211

  4. Top | #3
    EVT
    EVT is offline
    EVT's Avatar
    Join Date
    Dec 2017
    Last Online
    Yesterday @ 09:39 PM
    Location
    NJ
    Posts
    72
    Thanks
    6
    Thanked 15 Times in 12 Posts
    Also, Heavy Hitch has a lot of different sizes.
    rtgt and PJR832 like this.
    2018 1025R, 120R FEL, 260B BH
    BXpanded Barracuda thumb, Quick-on connector, Ripper, Trench bucket, Piranha tooth bar
    iMatch 3pt. Quick Hitch
    JD 54 inch Quick Hitch Snow Blade
    Frontier AP10F Pallet Forks
    Frontier PHD-100 Post Hole Digger
    Frontier LR2060L Landscape Rake
    JD Ballast Box
    Titan BX42 Wood Chipper
    Heavy Hitch Receiver and Suitcase Weight Bracket, Front bracket
    Lots of stuff from Ken's Bolt on Hooks

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Sep 2018
    Last Online
    Today @ 08:27 AM
    Location
    S.W. Michigan
    Posts
    214
    Thanks
    31
    Thanked 44 Times in 22 Posts
    Man … If you're capable of making a tooth bar, do it. I made mine, it's not that hard to do, and you'll save a wad of jing ...

    G
    Attached Thumbnails Attached Thumbnails DSCF3789 (1).JPG  
    rtgt and PJR832 like this.
    2013 - JD 1025r, 60" Auto Connect MMM, H120 FEL, 50" QA Loader Bucket, Home made Bucket Teeth, Titan QA loader fork back frame, Home made 66" Loader QA Snow Plow, Home made Land Plane. Home made loader QA Stump bucket. Home made loader boom pole attachment. Home made Landscape Rake. Modified HF Quick Hitch, Home made 3 point Ballast Box, Home made Debris Forks, Betsco BX42-S Wood Chipper, Woods 60" Back Blade, 72" Befco Finish Mower. 5' Bush Hog Mower. 1952 Ford 8N

  7. Top | #5
    rtgt's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 06:38 AM
    Location
    Kentucky
    Posts
    6,354
    Thanks
    1,777
    Thanked 1,127 Times in 798 Posts
    That is a nice bucket to have.

    I'd like one for my 3039R, but list price is $2,8xx.00.

    Looking at the pictures of it a Piranha tooth bar should fit it. You have to measure the inside dimension of your bucket and then Piranha builds it to fit. That is what I have on my regular bucket.

    Be aware that there have been some posts that BXpanded is a little slow on building/shipping so I would recommend calling them to order and ask how long it will take to get.

    Heavy Hitch is another good vendor that you can check out as well.
    BigJim55 and PJR832 like this.
    Taking the easy way is what makes rivers and men crooked.

    3039R, H160 FEL, 375A Backhoe, Artillian Grapple & Forks
    Z915E
    XUV560

  8. Top | #6

    Join Date
    Jul 2019
    Last Online
    08-01-2019 @ 09:34 AM
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by EVT View Post
    Also, Heavy Hitch has a lot of different sizes.
    I emailed Heavy Hitch and they said their bar doesn't fit a 4 in 1 bucket.

    I responded back and told them that I want to install it on the front like a normal bucket, not on the clam shell but haven't heard back from them.
    rtgt likes this.

  9. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •