Bucket level indicator 3025E
Results 1 to 8 of 8
Like Tree8Likes
  • 4 Post By Caloosakid
  • 3 Post By Caloosakid
  • 1 Post By Claimdude

Thread: Bucket level indicator 3025E

  1. Top | #1
    Caloosakid's Avatar
    Join Date
    Jul 2013
    Last Online
    Yesterday @ 08:14 AM
    Location
    Hayesville,North Carolina
    Posts
    18
    Thanks
    27
    Thanked 2 Times in 1 Post

    Bucket level indicator 3025E

    I was having trouble leveling the bucket while doing some grading. I decided to add a leveling indicator that I saw on a 4Series tractor at the dealership. The cost was around $79. I had to do some slight modifications to make it work but it functions perfectly. I also added a toolbox to the front of the tractor where the suitcase weights would normally be located.


    Sent from my iPhone using Tapatalk
    Regards,CaloosaKid

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Jul 2019
    Last Online
    09-04-2019 @ 08:31 AM
    Location
    Elkhart, Texas
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Do you have more details on the tool box and the bucket level indicator? You clear the tool box with the loader no problem?

  4. Top | #3
    Caloosakid's Avatar
    Join Date
    Jul 2013
    Last Online
    Yesterday @ 08:14 AM
    Location
    Hayesville,North Carolina
    Posts
    18
    Thanks
    27
    Thanked 2 Times in 1 Post
    I do not remember the part number but if you show the photo to the parts department they should be able to get it for you. Yes the tool box clears the loader no problem.


    Sent from my iPhone using Tapatalk
    Regards,CaloosaKid

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    BigJim55's Avatar
    Join Date
    Nov 2013
    Last Online
    Today @ 06:05 AM
    Location
    Schellsburg, PA
    Posts
    11,137
    Thanks
    3,002
    Thanked 1,381 Times in 1,084 Posts
    Quote Originally Posted by Caloosakid View Post
    I do not remember the part number but if you show the photo to the parts department they should be able to get it for you. Yes the tool box clears the loader no problem.


    Sent from my iPhone using Tapatalk
    that bucket leveler looks just like whats on my 2 series 2520-from way back in 06
    jim

    2006 2520 mcut, 2004 x475, 1953 model 50, 1985 318-was my Dad's,
    king kutter tiller-60", frontier-stone rake, jd-4ft brush hog, frontier-6ft back-blade, frontier-forks, 48 inch forks,
    2-54inch jd snow plows, jd-5ft-pull brush hog,

    2018 835R gas model gator-"aka" the Cadillac i say!! 6ft jd snow plow-which already has a dtac out on it. i got just about everything on it i could at the time

  7. The Following User Says Thank You to BigJim55 For This Useful Post:

    Caloosakid (08-03-2019)

  8. Top | #5

    Join Date
    May 2016
    Last Online
    Today @ 07:32 AM
    Location
    AR
    Posts
    16
    Thanks
    0
    Thanked 1 Time in 1 Post
    That looks like what I just ordered based on advice from another forum member. The part number is BW15223. I have a 3032e w/D160 loader. Would you mind uploading a couple of more close up pics and a little more detail regarding the mods you had to perform?

    Thanks
    Jack

  9. Top | #6
    Caloosakid's Avatar
    Join Date
    Jul 2013
    Last Online
    Yesterday @ 08:14 AM
    Location
    Hayesville,North Carolina
    Posts
    18
    Thanks
    27
    Thanked 2 Times in 1 Post
    I had to cut part of the tab off and drill and install a 5/16 bolt and a locknut to prevent the rod guide from rotating. I also drilled and added a Carter pin to the bolt where the rod attaches to the bucket to prevent the nut from loosening up as the bucket rotates.



    Sent from my iPhone using Tapatalk
    PaDave, 69project and Kbar like this.
    Regards,CaloosaKid

  10. Top | #7
    johncanfield's Avatar
    Join Date
    Apr 2017
    Last Online
    09-13-2019 @ 01:00 PM
    Location
    Texas Hill Country
    Posts
    550
    Thanks
    3
    Thanked 78 Times in 52 Posts
    That's the indicator I have on my H180 loader, I've found it quite useful. On my old Kubota bucket there was just an L shaped tab on top of the bucket for an indicator - if the horizontal part of the tab was parallel to the ground the bucket was level. It was basically useless.
    2010 Model 4720 with cab and H180 loader, MX8, MX6, Frontier BB1172 box blade, forks, bale spear, rear blade, WR Long grapple and tooth bar, Fit Rite Hydraulics top and tilt. 2019 Bobcat E42 excavator with cab & several attachments. 2019 Deere Z945M EFI ZTrak 60" 7 Iron Pro deck.

  11. The Following User Says Thank You to johncanfield For This Useful Post:

    Caloosakid (08-03-2019)

  12. Top | #8

    Join Date
    May 2016
    Last Online
    Today @ 07:32 AM
    Location
    AR
    Posts
    16
    Thanks
    0
    Thanked 1 Time in 1 Post
    Thanks Much Caloosakid!! That is exactly what I needed.

    Jack

    Quote Originally Posted by Caloosakid View Post
    I had to cut part of the tab off and drill and install a 5/16 bolt and a locknut to prevent the rod guide from rotating. I also drilled and added a Carter pin to the bolt where the rod attaches to the bucket to prevent the nut from loosening up as the bucket rotates.



    Sent from my iPhone using Tapatalk
    Caloosakid likes this.

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •