Anyone use this?
Seems pricey but as I get older and have a few herniated vertebra this might save some back ache
https://tractorptolink.com/
Anyone use this?
Seems pricey but as I get older and have a few herniated vertebra this might save some back ache
https://tractorptolink.com/
~Rick~
Psalm 27:1
The LORD is my light and my salvation; whom shall I fear? the LORD is the
strength of my life; of whom shall I be afraid?
Tolerance And Apathy Are The Last Virtues Of A Dying Society
2016 4105 - FEL, iMatch, Land Pride RCR1272, 5" Taylor Rotary Tiller
JD 4066R CAB
JD H180 FEL with SSQA brackets, JD iMatch, JD Ballast Box & ext, JD pull behind seed spreader
Frontier RB2196H 8 ft rear blade/hyd angle, Frontier BB1065 Box Blade, Befco 3pt 110 inch RFM
48" pallet forks, KK 3pt Boom Pole, Northern Tool 3pt middle buster, 2 bottom Dearborn plow
County Line post hole digger, Rhino 3pt 10ft brush hog, Land Pride 8ft rock rake
Fit Rite Hydraulics 3pt Top Link, front 3pt adapter for SSQA, 7 1/2 ft Field Roller, 8ft Dearborn tandem disk
~Rick~
Psalm 27:1
The LORD is my light and my salvation; whom shall I fear? the LORD is the
strength of my life; of whom shall I be afraid?
Tolerance And Apathy Are The Last Virtues Of A Dying Society
2016 4105 - FEL, iMatch, Land Pride RCR1272, 5" Taylor Rotary Tiller
If it makes it easier to do what you want/like to do, or makes it so you can do it longer in the future (adds more years of enjoyment to your life) I SAY BUY IT!
I remember buying a new vehicle with two tone paint that cost extra. My Dad asked why I would spend $$ for paint when one color was no extra cost. I told him I like the way it looked and smile every time I see it.
Last edited by Zebrafive; 08-28-2019 at 03:24 PM.
J
John Deere 2030 w/245SL Loader
John Deere 6415 w/640SL Loader
John Deere 285 50" deck Stolen May 2017
John Deere x485 62" deck AWS
Kawasaki Mule 2510 4x4 bought new 1996
Ford F250 4x4 bought new 1978
I really don't see how this will save any work for your back. It has 4 points of engagement instead of 6, so still has to be lined up, gotta bend over and connect it. Personally, I keep the PTO output shaft greased, shift the PTO to neutral, and hook up the shaft fairly easily. Maybe someone else has some experience with this particular coupler, but I don't understand how it makes it more than marginally easier than what is already on the tractor.
These have been brought up several times in the past. One thread that isn't to old:
easy PTO connect
Deere also has their own "Quick-Kinect" system which is slightly different but attempts to do the same thing.
John Deere: New Quik-Knect™ PTO Attachment System
It seems most folks balk at the price. Kinda expensive for what it does. But if someone has medical issues and this helps... Go for it!
D160 Mower/Bagger.
2014 2032R tractor/H130 FEL w/Bolt-On Hooks/54" Snow Plow/iMatch Quick-Hitch/County Line 5' Scraper blade/County Line Carry-All/Artillian 42" Forks & QH Adapter/JD Ballast Box/Frontier SB1164 3PH Blower/Leinbach PHD/Wallenstien BX42 Chipper
~Rick~
Psalm 27:1
The LORD is my light and my salvation; whom shall I fear? the LORD is the
strength of my life; of whom shall I be afraid?
Tolerance And Apathy Are The Last Virtues Of A Dying Society
2016 4105 - FEL, iMatch, Land Pride RCR1272, 5" Taylor Rotary Tiller
Although on second look, JD sure makes it hard to find the right implement side adapter
https://www.greenpartstore.com/asset...lity-guide.pdf
~Rick~
Psalm 27:1
The LORD is my light and my salvation; whom shall I fear? the LORD is the
strength of my life; of whom shall I be afraid?
Tolerance And Apathy Are The Last Virtues Of A Dying Society
2016 4105 - FEL, iMatch, Land Pride RCR1272, 5" Taylor Rotary Tiller
Leo Kellyveteran
"At Ease Gardens"
"A place for veterans with PTSD to relax and to heal"
1025rwith a Curtis cab
frontier box scrape, frontier brush hog, disk set, tiler, HLA snow pusher, frontier forks
and a few other necessary 3 point attachments
Bookmarks