Frontier land rake
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 31
Like Tree57Likes

Thread: Frontier land rake

  1. Top | #1
    mdgilbreath's Avatar
    Join Date
    May 2013
    Last Online
    10-17-2019 @ 08:00 PM
    Location
    Carthage ,Tn
    Posts
    227
    Thanks
    47
    Thanked 15 Times in 11 Posts

    Frontier land rake

    Hey guys found a one time used frontier land take I could use on my driveway in addition to my box blade. Itís priced at $500 no wheel attachments on it, thatís a new price for used. What do you all think?
    Going to check it out this weekend.



    2011 diesel 1026R mmm with FEL , box blade, WR long tooth bar , 4í bush hog and 25gal sprayer all on the imatch hookup.
    Sent from my iPhone using Tapatalk
    BigJim55, wentonbrown and Dr Kubar like this.
    Kind Regards
    mdgilbreath




    1026R with H120 FEL with a WR Long Tooth Bar
    Kens Bolt on Grab Hooks http://www.boltonhooks.com
    54" Deck mower quick detach
    48" Frontier bush hog -2048
    48" Frontier box blade -2048
    JD imatch hitch
    25 Gallon 12 volt Sprayer County Line from TSC
    3 Point hitch rig with a 2" receiver bar for sprayer mount
    2" Ball mount to pull utility trailer

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 07:27 PM
    Location
    Central Pennsylvania
    Posts
    10,041
    Thanks
    371
    Thanked 1,660 Times in 1,257 Posts
    It looks in very good condition. Actually, that's about $100 less than new. That's not a horrible deal. Perhaps you can get him to knock another $25 to $50 off. A Tarter wheel kit will run around $220.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  4. The Following User Says Thank You to jgayman For This Useful Post:

    mdgilbreath†(09-24-2019)

  5. Top | #3
    mdgilbreath's Avatar
    Join Date
    May 2013
    Last Online
    10-17-2019 @ 08:00 PM
    Location
    Carthage ,Tn
    Posts
    227
    Thanks
    47
    Thanked 15 Times in 11 Posts
    Quote Originally Posted by jgayman View Post
    It looks in very good condition. Actually, that's about $100 less than new. That's not a horrible deal. Perhaps you can get him to knock another $25 to $50 off. A Tarter wheel kit will run around $220.
    I would mainly be using it for my gravel drive 500í from road to house?


    2011 diesel 1026R mmm with FEL , box blade, WR long tooth bar , 4í bush hog and 25gal sprayer all on the imatch hookup.
    Sent from my iPhone using Tapatalk
    Kind Regards
    mdgilbreath




    1026R with H120 FEL with a WR Long Tooth Bar
    Kens Bolt on Grab Hooks http://www.boltonhooks.com
    54" Deck mower quick detach
    48" Frontier bush hog -2048
    48" Frontier box blade -2048
    JD imatch hitch
    25 Gallon 12 volt Sprayer County Line from TSC
    3 Point hitch rig with a 2" receiver bar for sprayer mount
    2" Ball mount to pull utility trailer

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4
    ddinham's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 03:18 PM
    Location
    Eastern Kansas
    Posts
    3,605
    Thanks
    167
    Thanked 500 Times in 383 Posts
    Seems a little high to me. I paid $450 for a used 8ft King Kutter rake 5 years ago that was in pretty good shape, but there was no doubt it was not new. I put the trailing wheels in it, but they were sure expensive for what I got. The wheel kit cost me $187.97 from Rural King. I had to adapt it to the iMatch. Merely drilling a hole lower than the existing top hole.

    Dave
    JD 4066R CAB
    JD H180 FEL with SSQA brackets, JD iMatch, JD Ballast Box & ext, JD pull behind seed spreader
    Frontier RB2196H 8 ft rear blade/hyd angle, Frontier BB1065 Box Blade, Befco 3pt 110 inch RFM
    48" pallet forks, KK 3pt Boom Pole, Northern Tool 3pt middle buster, 2 bottom Dearborn plow
    County Line post hole digger, Rhino 3pt 10ft brush hog, Land Pride 8ft rock rake
    Fit Rite Hydraulics 3pt Top Link, front 3pt adapter for SSQA, 7 1/2 ft Field Roller, 8ft Dearborn tandem disk

  8. The Following User Says Thank You to ddinham For This Useful Post:

    mdgilbreath†(09-24-2019)

  9. Top | #5
    mdgilbreath's Avatar
    Join Date
    May 2013
    Last Online
    10-17-2019 @ 08:00 PM
    Location
    Carthage ,Tn
    Posts
    227
    Thanks
    47
    Thanked 15 Times in 11 Posts
    Quote Originally Posted by ddinham View Post
    Seems a little high to me. I paid $450 for a used 8ft King Kutter rake 5 years ago that was in pretty good shape, but there was no doubt it was not new. I put the trailing wheels in it, but they were sure expensive for what I got. The wheel kit cost me $187.97 from Rural King. I had to adapt it to the iMatch. Merely drilling a hole lower than the existing top hole.

    Dave
    Itís imatch compatible , used one time and be sitting out in the elementals as you can tell by pics. Iím thinking of offering $400 to them for. Going to go look at Saturday. Like I said it would be mainly used for my drive way.


    2011 diesel 1026R mmm with FEL , box blade, WR long tooth bar , 4í bush hog and 25gal sprayer all on the imatch hookup.
    Sent from my iPhone using Tapatalk
    jgayman, chex313 and jdforever like this.
    Kind Regards
    mdgilbreath




    1026R with H120 FEL with a WR Long Tooth Bar
    Kens Bolt on Grab Hooks http://www.boltonhooks.com
    54" Deck mower quick detach
    48" Frontier bush hog -2048
    48" Frontier box blade -2048
    JD imatch hitch
    25 Gallon 12 volt Sprayer County Line from TSC
    3 Point hitch rig with a 2" receiver bar for sprayer mount
    2" Ball mount to pull utility trailer

  10. Top | #6
    ddinham's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 03:18 PM
    Location
    Eastern Kansas
    Posts
    3,605
    Thanks
    167
    Thanked 500 Times in 383 Posts
    Quote Originally Posted by mdgilbreath View Post
    Itís imatch compatible , used one time and be sitting out in the elementals as you can tell by pics. Iím thinking of offering $400 to them for. Going to go look at Saturday. Like I said it would be mainly used for my drive way.


    2011 diesel 1026R mmm with FEL , box blade, WR long tooth bar , 4í bush hog and 25gal sprayer all on the imatch hookup.
    Sent from my iPhone using Tapatalk


    Yeah, I use mine for my long gravel driveways. Works really well. I have never used my box blade on it. Since it is fairly level, there has been no need for the box blade. If I had hills or ditches, I could see the need for the rear blade or box blade. The rake really dresses up the gravel and makes it look really nice.

    Dave
    JD 4066R CAB
    JD H180 FEL with SSQA brackets, JD iMatch, JD Ballast Box & ext, JD pull behind seed spreader
    Frontier RB2196H 8 ft rear blade/hyd angle, Frontier BB1065 Box Blade, Befco 3pt 110 inch RFM
    48" pallet forks, KK 3pt Boom Pole, Northern Tool 3pt middle buster, 2 bottom Dearborn plow
    County Line post hole digger, Rhino 3pt 10ft brush hog, Land Pride 8ft rock rake
    Fit Rite Hydraulics 3pt Top Link, front 3pt adapter for SSQA, 7 1/2 ft Field Roller, 8ft Dearborn tandem disk

  11. The Following User Says Thank You to ddinham For This Useful Post:

    mdgilbreath†(09-24-2019)

  12. Top | #7
    mdgilbreath's Avatar
    Join Date
    May 2013
    Last Online
    10-17-2019 @ 08:00 PM
    Location
    Carthage ,Tn
    Posts
    227
    Thanks
    47
    Thanked 15 Times in 11 Posts
    Quote Originally Posted by ddinham View Post
    Yeah, I use mine for my long gravel driveways. Works really well. I have never used my box blade on it. Since it is fairly level, there has been no need for the box blade. If I had hills or ditches, I could see the need for the rear blade or box blade. The rake really dresses up the gravel and makes it look really nice.

    Dave
    My drive way has slope on front end. Bb will pull some gravel for sure. Iím using that and my FEL to keep it level and straight now. Those wash out rains gets it good sometimes. Havenít had gravel put down since 2013. Itís time for a load or two and something easier to work it like the land rack.


    2011 diesel 1026R mmm with FEL , box blade, WR long tooth bar , 4í bush hog and 25gal sprayer all on the imatch hookup.
    Sent from my iPhone using Tapatalk
    jdforever and JD4044M like this.
    Kind Regards
    mdgilbreath




    1026R with H120 FEL with a WR Long Tooth Bar
    Kens Bolt on Grab Hooks http://www.boltonhooks.com
    54" Deck mower quick detach
    48" Frontier bush hog -2048
    48" Frontier box blade -2048
    JD imatch hitch
    25 Gallon 12 volt Sprayer County Line from TSC
    3 Point hitch rig with a 2" receiver bar for sprayer mount
    2" Ball mount to pull utility trailer

  13. Top | #8
    jdforever's Avatar
    Join Date
    Feb 2014
    Last Online
    Today @ 08:13 PM
    Location
    Pataskala, Ohio
    Posts
    1,826
    Thanks
    478
    Thanked 476 Times in 319 Posts
    Quote Originally Posted by mdgilbreath View Post
    Itís imatch compatible , used one time and be sitting out in the elementals as you can tell by pics. Iím thinking of offering $400 to them for. Going to go look at Saturday. Like I said it would be mainly used for my drive way.


    2011 diesel 1026R mmm with FEL , box blade, WR long tooth bar , 4í bush hog and 25gal sprayer all on the imatch hookup.
    Sent from my iPhone using Tapatalk
    I would think that $400 would be a fair price, but no more. In January of 2018, I Paid $600 for a brand new Woods LRS60, which is a 5 foot rake.
    BigJim55 and JD4044M like this.
    Greg

    Growing old is mandatory, growing up is optional!

    2018 JD 1025R FEL /Mauser cab / 53" Bucket/Heavy hitch tooth bar / I-Match / Kenny's extended hook / JD ballast box / Loader mounted JD 54" snow plow/9" wings / Artillian 36" pallet fork set / Woods RTR48.30 tiller & LRS60 landscape rake / Howes 48" box blade /Heavy Hitch receiver/weight bracket / Heavy Hitch ripper/middle plow/subsoiler / Dual Alpena Hex Fire rear led lights / Bora 2" spacers / Land Pride CA1548 core aerator

  14. Top | #9

    Join Date
    Apr 2016
    Last Online
    Yesterday @ 10:12 PM
    Location
    wynnewood, OK
    Posts
    185
    Thanks
    275
    Thanked 18 Times in 16 Posts
    I feel the value of it is around $400. Limited Category 1 implements are hard to find used, at least geographically for me. It is limited cat 1, because of the "L" on the end, which is perfect for your 1026R. I have one, the tines and hitch are shorter, for our short tractors.
    mdgilbreath likes this.

  15. The Following User Says Thank You to lindsey97 For This Useful Post:

    mdgilbreath†(09-25-2019)

  16. Top | #10
    ttazzman's Avatar
    Join Date
    Feb 2019
    Last Online
    Today @ 06:51 PM
    Location
    sw mo
    Posts
    544
    Thanks
    19
    Thanked 74 Times in 58 Posts
    Quote Originally Posted by mdgilbreath View Post
    I would mainly be using it for my gravel drive 500í from road to house?


    2011 diesel 1026R mmm with FEL , box blade, WR long tooth bar , 4í bush hog and 25gal sprayer all on the imatch hookup.
    Sent from my iPhone using Tapatalk
    box blade is the best tool for the drive........unless you have something else to use it for or just want it i would put $ elsewhere ...those do a great job on landscaping though
    mdgilbreath and BigJim55 like this.
    John Deere
    5105M
    2140
    4500
    Caterpillar
    D4Hxl
    416C
    Gehl
    5635DX

  17. The Following User Says Thank You to ttazzman For This Useful Post:

    mdgilbreath†(09-25-2019)

  18. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 4 1 2 3 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts