E-z post puller
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23
Like Tree77Likes

Thread: E-z post puller

  1. Top | #1

    Join Date
    Sep 2018
    Last Online
    Yesterday @ 04:25 PM
    Location
    S.W. Michigan
    Posts
    218
    Thanks
    32
    Thanked 45 Times in 23 Posts

    E-z post puller

    I found another thing my little tractor is good for … Pullin fence posts.
    I welded a grab hook on top of the square tube on my receiver hitch, and used a chain to pull a bunch of fence posts out of the ground.
    I backed the tractor up next to the post, set the brakes, and lowered the three point down, wrapped the chain around the post a couple of times, then stood beside the tractor to operate the three point lift leaver.
    The steel post were a snap, but I was apprehensive about tackling the wooden posts since they had been driven in with a hydraulic driver.
    Surprisingly, they came out of the ground almost as easily as the steel post did.
    Once pulled I loaded the posts on the loader forks for easy transport.

    G
    Attached Thumbnails Attached Thumbnails DSCF4265.JPG   DSCF4267.JPG   DSCF4272.JPG   DSCF4274.JPG   DSCF4276.JPG  

    mjncad, glc, etcallhome and 19 others like this.
    2013 - JD 1025r, 60" Auto Connect MMM, H120 FEL, 50" QA Loader Bucket, Home made Bucket Teeth, Titan QA loader fork back frame, Home made 66" Loader QA Snow Plow, Home made Land Plane. Home made loader QA Stump bucket. Home made loader boom pole attachment. Home made Landscape Rake. Modified HF Quick Hitch, Home made 3 point Ballast Box, Home made Debris Forks, Betsco BX42-S Wood Chipper, Woods 60" Back Blade, 72" Befco Finish Mower. 5' Bush Hog Mower. 1952 Ford 8N

  2. The Following User Says Thank You to Gwizz For This Useful Post:

    130Oxbow (09-26-2019)

  3. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  4. Top | #2
    Bubber's Avatar
    Join Date
    May 2012
    Last Online
    Today @ 08:20 AM
    Location
    Georgia
    Posts
    3,615
    Thanks
    447
    Thanked 610 Times in 392 Posts
    I do it too.

    I set and pull t posts in the garden a lot. Chain wrapped around the post works fine, but I picked one of these up and it works great too.

    Click image for larger version. 

Name:	667339.jpg 
Views:	211 
Size:	34.7 KB 
ID:	706862
    mjncad, Kennyd, glc and 18 others like this.
    2014 2032r Classic...


    -Dan

  5. Top | #3

    Join Date
    Sep 2018
    Last Online
    Today @ 12:34 PM
    Location
    Wayne, WV
    Posts
    51
    Thanks
    25
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by Bubber View Post
    I do it too.

    I set and pull t posts in the garden a lot. Chain wrapped around the post works fine, but I picked one of these up and it works great too.

    Click image for larger version. 

Name:	667339.jpg 
Views:	211 
Size:	34.7 KB 
ID:	706862
    I've one of those too. Does a great job.

    Sent from my SM-G975U using Tapatalk
    3025E, D160 FEL, Bush Hog 5' tiller, 5' rotary mower, 4' rotary mower, post hole digger

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4
    Steve51's Avatar
    Join Date
    Jul 2019
    Last Online
    10-16-2019 @ 04:16 PM
    Location
    West Union, IL
    Posts
    14
    Thanks
    0
    Thanked 1 Time in 1 Post
    Quote Originally Posted by Bubber View Post
    I do it too.

    I set and pull t posts in the garden a lot. Chain wrapped around the post works fine, but I picked one of these up and it works great too.

    Click image for larger version. 

Name:	667339.jpg 
Views:	211 
Size:	34.7 KB 
ID:	706862

    I have never seen one - where did you get it?
    2025R, 120R FEL, 260B, 60D MMM, Titan 48" Pallet Forks, King Kutter II 60" Tiller

  8. Top | #5
    Bubber's Avatar
    Join Date
    May 2012
    Last Online
    Today @ 08:20 AM
    Location
    Georgia
    Posts
    3,615
    Thanks
    447
    Thanked 610 Times in 392 Posts
    I got mine at tractor supply. https://www.tractorsupply.com/tsc/pr...r?cm_vc=-10005

    Here it is on Amazon https://smile.amazon.com/SpeeCo-S161...gateway&sr=8-5

    Walmart https://www.walmart.com/ip/SPECIAL-S...10400/38471047

    It'd be cheaper if you could find it local and not pay shipping.
    Kennyd, etcallhome and Tomfive like this.
    2014 2032r Classic...


    -Dan

  9. The Following User Says Thank You to Bubber For This Useful Post:

    mjncad (09-28-2019)

  10. Top | #6

    Join Date
    May 2013
    Last Online
    Today @ 05:19 AM
    Location
    Eastern Panhandle WV
    Posts
    1,030
    Thanks
    16
    Thanked 168 Times in 96 Posts
    Man, the stuff you find on this forum. Never knew they made these things. I always used a chain and the FEL hooked to KennyD hooks.
    2019 3046r, 385A BH, FEL, JD Ballist box, 6' 3pt hitch rake, 4 way 48" snow blade, 7' 3pt hitch drag blade
    Zero turn Z445, 5' 3pt hitch woods mower, 42" Artillian Pallet forks W/Adapter for snow plow, Standard 3pt hitch receiver to move trailers.
    I haul the tractor with a 2015 2500HD Chevrolet Silverado 4X4 6.6L Duramax W/Allison transmission a 2013 18' 7500lb dove tail trailer made by Appilachian trailers.
    Stihl MS271 Farm Boss Chain Saw 18" blade, Piranha Bar.

  11. Top | #7

    Join Date
    Sep 2018
    Last Online
    Yesterday @ 04:25 PM
    Location
    S.W. Michigan
    Posts
    218
    Thanks
    32
    Thanked 45 Times in 23 Posts
    Saw those post puller "thingies" you guys were using to pull steel post with, and thought …
    Hey I can make one of those. I went to the shop and carved out one from a piece of 3/8 steel plate.

    G
    Attached Thumbnails Attached Thumbnails DSCF4278.JPG   DSCF4279.JPG  
    mjncad, Kennyd, glc and 8 others like this.
    2013 - JD 1025r, 60" Auto Connect MMM, H120 FEL, 50" QA Loader Bucket, Home made Bucket Teeth, Titan QA loader fork back frame, Home made 66" Loader QA Snow Plow, Home made Land Plane. Home made loader QA Stump bucket. Home made loader boom pole attachment. Home made Landscape Rake. Modified HF Quick Hitch, Home made 3 point Ballast Box, Home made Debris Forks, Betsco BX42-S Wood Chipper, Woods 60" Back Blade, 72" Befco Finish Mower. 5' Bush Hog Mower. 1952 Ford 8N

  12. Top | #8
    Steve51's Avatar
    Join Date
    Jul 2019
    Last Online
    10-16-2019 @ 04:16 PM
    Location
    West Union, IL
    Posts
    14
    Thanks
    0
    Thanked 1 Time in 1 Post
    Thanks "Bubber". Got to get one.
    Bubber likes this.
    2025R, 120R FEL, 260B, 60D MMM, Titan 48" Pallet Forks, King Kutter II 60" Tiller

  13. Top | #9
    Bubber's Avatar
    Join Date
    May 2012
    Last Online
    Today @ 08:20 AM
    Location
    Georgia
    Posts
    3,615
    Thanks
    447
    Thanked 610 Times in 392 Posts
    Quote Originally Posted by Gwizz View Post
    Saw those post puller "thingies" you guys were using to pull steel post with, and thought …
    Hey I can make one of those. I went to the shop and carved out one from a piece of 3/8 steel plate.

    G
    Looking good. This is why I love this place!
    2014 2032r Classic...


    -Dan

  14. Top | #10
    Poppi's Avatar
    Join Date
    Oct 2018
    Last Online
    10-16-2019 @ 03:36 PM
    Location
    Eagle, Wisconsin
    Posts
    34
    Thanks
    6
    Thanked 3 Times in 3 Posts

    Post Installer

    Ok .... so we've got some excellent ways to remove the T posts, but any ideas on installation?? I'm going to be putting a fence around a garden area and I'm looking for an easy way to put the posts in. I don't have a BH or auger.
    rtgt likes this.

  15. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 3 1 2 3 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •