will a ratchet rake fit on a piranha tooth bar??
Results 1 to 2 of 2
Like Tree2Likes
  • 2 Post By mark02tj

Thread: will a ratchet rake fit on a piranha tooth bar??

  1. Top | #1
    chrisrhoads's Avatar
    Join Date
    Jul 2014
    Last Online
    09-21-2018 @ 06:00 PM
    Dickinson, TX
    Thanked 13 Times in 2 Posts

    will a ratchet rake fit on a piranha tooth bar??

    I was just wondering if anyone has tried this??
    1025R FILB, 60D deck, 260 Back hoe, H120 loader
    psrumors seat springs
    kens weld on hooks and kens skunkworks proto-type for back hoe cylinder protectors (pics up on my home page).
    52" Ratchet Rake

  2. Remove Advertisements

  3. Top | #2

    Join Date
    Dec 2013
    Last Online
    Yesterday @ 09:10 PM
    Southwest Ohio
    Thanked 837 Times in 606 Posts
    I'm just wondering why you'd want to do it?

    Most of the threads on here that contain "Ratchet Rake" and "Piranha Tooth Bar" are of the "which one should I buy" variety. I don't know of too many people that buy both although for back dragging I can see where you might want the Ratchet Rake.

    I don't know if it will work or not, so I'll say "Maybe". It will have to depend on the spacing of the Ratchet Rake mounts and if they line up with the teeth of the Piranha. If all of the mounts will fit in a "V", then you might be alright.

    BUT... If it were me, I'd just spend the two minutes to take off the Piranha to mount the Ratchet Rake. It's just two bolts, so with my impact wrench and a box-end, there's not much to taking it off.
    Kennyd and danmorea like this.
    '05 JD 3520 Open Station w/ 300CX FEL
    Grandpa's '52 Farmall Cub
    A couple of old Gravelys
    Help a Vet and his dog

  4. Remove Advertisements


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts