200CX or H130 loader - need some measurements
Results 1 to 3 of 3

Thread: 200CX or H130 loader - need some measurements

  1. Top | #1

    Join Date
    Mar 2014
    Last Online
    Yesterday @ 06:47 PM
    Location
    Long Island, NY
    Posts
    311
    Thanks
    25
    Thanked 51 Times in 36 Posts

    200CX or H130 loader - need some measurements

    Can anyone who's got a 200CX or H130 loader measure a few things for me? I'm looking for the distance that the connections are up from the bends on oil line part# 15. Also how far from the bottom bend to the angle bend on the right side. It's the third one back and the one with the lowest connections.
    Thanks, Roger

    2005 - JD 4110, 54" front blade, 47" snow blower
    2004 - JD X595, 54" front blade
    2000 - JD 4100, 410 FEL

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    glc
    glc is offline
    glc's Avatar
    Join Date
    Sep 2010
    Last Online
    Yesterday @ 06:58 PM
    Location
    Big Beaver,Pa
    Posts
    5,311
    Thanks
    523
    Thanked 410 Times in 368 Posts
    Hello Roger

    I tried to get it as close to center as I could. From the bottom bend to top bend it is in the neighborhood of 26" to 26-1/4". From the bottom bend to the welded on hose fitting is pretty much right at 14". There is another slight bend, maybe 30 degree just before where the hard line ends at top. From top angle bend to this one is just about 19". Is the H130 straight maybe. Not sure why it's not shown.

    Anyway, hope this helps you.
    Last edited by glc; 04-22-2016 at 12:34 AM.
    Greg from western pa



    2009 2520
    FEL/61" HD bucket/replaceable cutting edge
    62D2 MMM
    IMatch Quick Hitch
    A "REAL" snow blade ---- JD 380A modded to fit
    Homemade 3PT Receiver
    Homemade Ballast Box
    Woods GB65 Box Blade

    2019 JOHN DEERE X390 with 48" ACCEL DEEP DECK

    MY 2520 SE SEAT MOD:

    https://www.greentractortalk.com/for...d-for-the-2520

    MY BALLAST BOX
    https://www.greentractortalk.com/for...llast-box.html

  4. Top | #3

    Join Date
    Mar 2014
    Last Online
    Yesterday @ 06:47 PM
    Location
    Long Island, NY
    Posts
    311
    Thanks
    25
    Thanked 51 Times in 36 Posts
    Quote Originally Posted by glc View Post
    Hello Roger

    I tried to get it as close to center as I could. From the bottom bend to top bend it is in the neighborhood of 26" to 261/4". From the bottom bend to the welded on hose fitting is pretty much right at 14". There is another slight bend, maybe 30 degree just before where the hard line ends at top. From top angle bend to this one is just about 19". Is the H130 straight maybe. Not sure why it's not shown.

    Anyway, hope this helps you.
    Thank you very much Greg. Do you have a 200CX? Are your hard lines are not like the diagram, you have an extra bend at the top? I just compared the H130 diagram and the 200CX and they look identical, even the same part #'s.
    Last edited by eastcreek; 04-21-2016 at 06:44 PM.
    2005 - JD 4110, 54" front blade, 47" snow blower
    2004 - JD X595, 54" front blade
    2000 - JD 4100, 410 FEL

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •