Will this work with a 1025R
Results 1 to 10 of 10
Like Tree16Likes
  • 1 Post By Arvada
  • 1 Post By coaltrain
  • 2 Post By Arvada
  • 2 Post By 56FordGuy
  • 2 Post By coaltrain
  • 1 Post By Arvada
  • 1 Post By johnH123
  • 4 Post By 56FordGuy
  • 1 Post By Drifterbike
  • 1 Post By Kennyd

Thread: Will this work with a 1025R

  1. Top | #1
    Arvada's Avatar
    Join Date
    Apr 2016
    Last Online
    07-16-2019 @ 11:29 AM
    Location
    Sierra Foothills, CA
    Posts
    481
    Thanks
    3
    Thanked 42 Times in 35 Posts

    Will this work with a 1025R

    Saw this at Northern Tool and was wondering if the Power Beyond on my 1025R can handle the 8 GPM and 2500 PSI capacity which is on the minimum requirements for this splitter.

    Any thoughts.

    Or is there something else that works better? This attaches to the 3PT and has great reviews. Only $699.00
    Drifterbike likes this.
    JD
    2016-1025R
    H120 Loader
    54"MMM W/Mulching Kit
    647 Tiller

    Power Beyond Kit Dealer Installed
    Quick Hitch
    Ballast Box
    Titan 42" Forks
    Agri-Fab 175-Pound Tow Broadcast Spreader
    Heavy Hitch Tooth Bar
    More to add as needed.

    Added:
    Ken's Bolt On Hooks
    Diff Pedal Extension
    Oblong Ring Sling

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    coaltrain's Avatar
    Join Date
    May 2014
    Last Online
    Today @ 02:52 PM
    Location
    NW Penna
    Posts
    20,199
    Thanks
    1,094
    Thanked 3,111 Times in 2,273 Posts
    What did you see?
    Drifterbike likes this.
    ~Stan~
    It is what it is
    Knowledge is power, ignorance is bliss
    2520 w/200CX w/62D2

  4. Top | #3
    Arvada's Avatar
    Join Date
    Apr 2016
    Last Online
    07-16-2019 @ 11:29 AM
    Location
    Sierra Foothills, CA
    Posts
    481
    Thanks
    3
    Thanked 42 Times in 35 Posts
    Quote Originally Posted by coaltrain View Post
    What did you see?
    Sorry thought I attached this.

    Powerhorse 3-Pt. Horizontal/Vertical Log Splitter — 22 Tons | Log Splitters| Northern Tool + Equipment
    Levi and Drifterbike like this.
    JD
    2016-1025R
    H120 Loader
    54"MMM W/Mulching Kit
    647 Tiller

    Power Beyond Kit Dealer Installed
    Quick Hitch
    Ballast Box
    Titan 42" Forks
    Agri-Fab 175-Pound Tow Broadcast Spreader
    Heavy Hitch Tooth Bar
    More to add as needed.

    Added:
    Ken's Bolt On Hooks
    Diff Pedal Extension
    Oblong Ring Sling

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    56FordGuy's Avatar
    Join Date
    Jan 2012
    Last Online
    Today @ 01:10 PM
    Location
    Wyoming
    Posts
    10,043
    Thanks
    482
    Thanked 1,661 Times in 1,091 Posts
    You will need the power beyond kit for your tractor to power it, and even then it will be extremely slow. The 1 series doesn't have the hydraulic capability to flow 8 GPM, I think it has roughly half that available to implements.
    Levi and Drifterbike like this.
    -Blake

    Your mileage may vary.

    JD 6410
    Some other stuff

    YouTube- Life in Wyoming

  7. Top | #5
    coaltrain's Avatar
    Join Date
    May 2014
    Last Online
    Today @ 02:52 PM
    Location
    NW Penna
    Posts
    20,199
    Thanks
    1,094
    Thanked 3,111 Times in 2,273 Posts
    John Deere 1025R Tractor Hydraulics

    Steering (gpm) - 2.8 (10.8)
    Implement (gpm) - 3.5 (13.2)
    Total Capacity (gpm) - 6.3 (24)
    56FordGuy and Drifterbike like this.
    ~Stan~
    It is what it is
    Knowledge is power, ignorance is bliss
    2520 w/200CX w/62D2

  8. Top | #6
    Arvada's Avatar
    Join Date
    Apr 2016
    Last Online
    07-16-2019 @ 11:29 AM
    Location
    Sierra Foothills, CA
    Posts
    481
    Thanks
    3
    Thanked 42 Times in 35 Posts
    Quote Originally Posted by 56FordGuy View Post
    You will need the power beyond kit for your tractor to power it, and even then it will be extremely slow. The 1 series doesn't have the hydraulic capability to flow 8 GPM, I think it has roughly half that available to implements.
    So you are saying it will work but extremely slow? Is there something better around the same cost? I have the power beyond installed already.
    Levi likes this.
    JD
    2016-1025R
    H120 Loader
    54"MMM W/Mulching Kit
    647 Tiller

    Power Beyond Kit Dealer Installed
    Quick Hitch
    Ballast Box
    Titan 42" Forks
    Agri-Fab 175-Pound Tow Broadcast Spreader
    Heavy Hitch Tooth Bar
    More to add as needed.

    Added:
    Ken's Bolt On Hooks
    Diff Pedal Extension
    Oblong Ring Sling

  9. Top | #7
    johnH123's Avatar
    Join Date
    Feb 2015
    Last Online
    Today @ 12:43 PM
    Location
    Indiana
    Posts
    4,391
    Thanks
    463
    Thanked 328 Times in 276 Posts
    A pto driven hydro pump would work.
    Levi likes this.
    - 2002 John Deere 4510 TLB PR,
    -Woods BB60X 60" rotary cutter
    -Countyline box blade,
    -Allis Chalmers sickle mower,
    -RED windrow rake,
    -titan 48" 3000 pound forks/bale spear
    - Farm Star rear bale spear

    Yamaha Rhino 700, Yamaha Rhino 660,
    Murray 624 mower/38" deck

  10. Top | #8
    56FordGuy's Avatar
    Join Date
    Jan 2012
    Last Online
    Today @ 01:10 PM
    Location
    Wyoming
    Posts
    10,043
    Thanks
    482
    Thanked 1,661 Times in 1,091 Posts
    Quote Originally Posted by Arvada View Post
    So you are saying it will work but extremely slow? Is there something better around the same cost? I have the power beyond installed already.
    It will work in the sense that the cylinder will move, but it's going to be excruciatingly slow. Even at 8 gpm three point splitters are significantly less efficient than stand alone versions, but you have less than half of what the splitter calls for. It's going to crawl, and probably not have the splitting force it advertises.

    I would recommend a stand alone splitter with its own engine.
    -Blake

    Your mileage may vary.

    JD 6410
    Some other stuff

    YouTube- Life in Wyoming

  11. Top | #9
    Drifterbike's Avatar
    Join Date
    Jul 2015
    Last Online
    Today @ 01:40 PM
    Location
    Hampton Ill
    Posts
    2,715
    Thanks
    1,086
    Thanked 317 Times in 278 Posts
    Amen i also recommend a stand alone splitter. I often am using loader to fee the splitter. Good Luck
    Levi likes this.
    2018 2038R 220R FEL, 72" Mower, Radial tires, wheel spacers, dual rear SVCs, CtA grapple, single point for FEL, 60" broom with front hitch;2018 1025R 54"auto connect, HDAP tires, Quick Hitch, Ballast Box, Etc...;1967 1020 3cylinder gas, #47 FEL, 72" Landpride Grooming Mower, 6ft box blade, For Sale(no Hurry); life Member NRA since 1974

  12. Top | #10
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 02:50 PM
    Location
    Westminster, MD
    Posts
    16,446
    Thanks
    5,064
    Thanked 4,086 Times in 2,550 Posts
    A few recent threads on this very subject:

    http://www.greentractortalk.com/foru...log%20splitter
    Levi likes this.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •