Visit to local collection
Results 1 to 9 of 9
Like Tree35Likes
  • 16 Post By Aussie John
  • 3 Post By DRobinson
  • 4 Post By MDrew
  • 4 Post By dieselshadow
  • 4 Post By Jeff B
  • 2 Post By Robnik
  • 1 Post By Old Cajun
  • 1 Post By Aussie John

Thread: Visit to local collection

  1. Top | #1

    Join Date
    Apr 2017
    Last Online
    05-23-2019 @ 05:08 AM
    Location
    Toowoomba, Queensland, Australia
    Posts
    16
    Thanks
    0
    Thanked 16 Times in 3 Posts

    Visit to local collection

    Last week-end, I attended a group social outing and visit to one of our local collections near Toowoomba. It was a great collection of the small to mid-size Johnny Poppers and also some Lanz Bulldogs. It was a hot day though but was good to sit in the shade for a yarn and look around this collection.
    Can anyone identify the John Deere horse drawn implement? I will post the answer in a few day's time.

    The small black Lanz in photos #1322 & 1323 is one of the first tractors Lanz built ant it is virtually a stationary engine on wheels with a very basic gear transmission drive. Don't know how many of these survive today and I have only seen one other here in Australia.
    Attached Thumbnails Attached Thumbnails IMG_1319.JPG   IMG_1321.JPG   IMG_1326.JPG   IMG_1330.JPG   IMG_1327.JPG  

    IMG_1328.JPG   IMG_1322.JPG   IMG_1324.JPG   IMG_1329.JPG   IMG_1323.JPG  


  2. The Following 10 Users Say Thank You to Aussie John For This Useful Post:

    Auguste (02-15-2019), ddinham (02-14-2019), E.J.H (02-15-2019), HVACguy (02-14-2019), Jeff B (02-14-2019), mark02tj (02-14-2019), Old Cajun (02-14-2019), Oscar Leroy (02-14-2019), pcabe5 (02-14-2019), Superglidesport (02-21-2019)

  3. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  4. Top | #2
    DRobinson's Avatar
    Join Date
    Jan 2011
    Last Online
    Yesterday @ 06:08 PM
    Location
    Northeastern PA
    Posts
    10,329
    Thanks
    2,054
    Thanked 2,214 Times in 1,379 Posts
    Thanks for the pictures.
    Don

    2320, 54D MMM, 200CX FEL, 54 Front Blade with Artillian Extensions, Omni Transformer Hitch
    445, 54 mower and 54 front blade
    80 dump cart, 21 walk behind mower

  5. Top | #3
    MDrew's Avatar
    Join Date
    May 2013
    Last Online
    Yesterday @ 09:58 PM
    Location
    S.E. WI
    Posts
    3,833
    Thanks
    271
    Thanked 622 Times in 398 Posts
    I saw a Lanz-Deere in a collection here. Much later than the one pictured. That's a cool collection.

    That looks to be a little narrow and short for a potato digger, carrots, radishes?
    Last edited by MDrew; 02-14-2019 at 06:12 AM.
    Mike

    Sometimes I'm only funny to myself.

    300, 140, 318, 430, 314, 110. Brinly plows, disk, 80 cart, couple of 49 blowers, 3 54 blades, 33 tiller, tilt dump MCS, HPX Gator, CS Gator, Model A. Struck MD 750 w/bucket and hoe.
    Drew's Performance: We screwed the last guy so we can pass the savings on to you.

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Yesterday @ 09:03 PM
    Location
    Joelton TN
    Posts
    19,661
    Thanks
    1,063
    Thanked 4,252 Times in 2,560 Posts
    Super cool pics. Thanks for sharing!
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

  8. Top | #5

    Join Date
    Sep 2015
    Last Online
    Yesterday @ 05:39 PM
    Location
    Burton, Ohio
    Posts
    2,700
    Thanks
    521
    Thanked 428 Times in 337 Posts
    Looks like a great collection and I really like that crawler, thank you.
    1025R FILB, vintage: 2015
    54D MM mowing deck
    Imatch hitch
    2 inch receiver for three point
    "18" cart
    Piranha Tooth Bar
    Ken's hooks and differential lock pedal
    Artillian 36" forks
    Stihl equipment: Saws; MS261C, MS462C, MS661RCM and Blower; BR600 and Trimmer; FS70R and Hedge Cutter; HL 56K and Pressure Washer; RB400
    Husky log splitter

  9. Top | #6
    Robnik's Avatar
    Join Date
    Dec 2016
    Last Online
    08-11-2019 @ 01:34 PM
    Location
    Deleon Springs Florida
    Posts
    837
    Thanks
    185
    Thanked 133 Times in 123 Posts
    That is a great collection. And thanks for the pictures.
    Superglidesport and Old Cajun like this.
    2015 1025R TLB
    Kens bolt on hooks and clevis (3) and differential lock pedal
    JD phd with 6" and 9" augers
    2048 box blade
    Titan 36" forks
    Country Way 40 gallon 3 pt. Sprayer
    Piranha tooth bar
    6 acres in Central Florida

  10. Top | #7
    Old Pa-pa Old Cajun's Avatar
    Join Date
    Sep 2014
    Last Online
    Yesterday @ 08:52 PM
    Location
    South Louisiana
    Posts
    10,686
    Thanks
    769
    Thanked 1,287 Times in 943 Posts
    Thanks for the pics, very impressive collection!
    Superglidesport likes this.
    Neil

    2019 4066R with cab (aka Cooterpiller), 2014 997 Z Trak
    Other equip: 1982 IH 274 diesel, 1957 Farmall Cub, Woods Billy Goat 5 foot rotary cutter, Ford three point hitch 6 foot dozer blade,
    home brew dirt and gravel grader, dirt scoop, choppers, Woods six foot belly mount sickle bar, home brew 3PH 25 gallon sprayer, 1992 33 inch cut Snapper
    rear engine rider, 1984 30 inch cut Snapper rear engine rider.

  11. Top | #8

    Join Date
    Apr 2017
    Last Online
    05-23-2019 @ 05:08 AM
    Location
    Toowoomba, Queensland, Australia
    Posts
    16
    Thanks
    0
    Thanked 16 Times in 3 Posts
    Quote Originally Posted by Aussie John View Post
    Last week-end, I attended a group social outing and visit to one of our local collections near Toowoomba. It was a great collection of the small to mid-size Johnny Poppers and also some Lanz Bulldogs. It was a hot day though but was good to sit in the shade for a yarn and look around this collection.
    Can anyone identify the John Deere horse drawn implement? I will post the answer in a few day's time.

    The small black Lanz in photos #1322 & 1323 is one of the first tractors Lanz built ant it is virtually a stationary engine on wheels with a very basic gear transmission drive. Don't know how many of these survive today and I have only seen one other here in Australia.
    Yes, the horse drawn implement in the first photo is a potato digger. The sieve bars at the back of the implement are shaken up and down by a paddle type wheel, ground driven to separate the soil from the potatoes. There were several other small horse implements on show and all obtained locally as this area near us is known as Queensland's Salad Bowl. All types of vegetables are gown here. Thanks for everyone's comments.
    Superglidesport likes this.

  12. Top | #9
    Superglidesport's Avatar
    Join Date
    Dec 2011
    Last Online
    Yesterday @ 10:04 PM
    Location
    Littleton, MA
    Posts
    7,688
    Thanks
    688
    Thanked 1,577 Times in 989 Posts
    Great photos of a nice collection.

    Thanks for posting!
    John Deere 3320
    eHydro, R4's, 300CX Loader, 61" HD Bucket
    JD Tooth Bar, Deluxe Hood Guard, Ken's Bolt-on Hooks
    485 Backhoe w. 18" HD Bucket
    Mid-PTO, Front 3 Point Hitch, 366 Front Blade
    Tarter 5' 3PH Tiller
    Frontier AP12F Forks

    John Deere 2032R
    R3's, 220R Loader, 57" HD Bucket
    Curtis Hard Side Cab & Heater
    62D Deck, iMatch Quick Hitch
    54 Snowblower
    Super HeavyHitch
    Little Wonder "Optimax" & JRCO Blower Buggy
    Fimco 60 Gallon 3PH Boomless Sprayer w. PTO Pump

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Similar Threads

  1. A Personal Video Visit with Levi
    By Tractor Tim in forum Off Topic
    Replies: 80
    Last Post: 01-04-2017, 07:26 AM
  2. Replies: 1
    Last Post: 05-30-2015, 07:39 AM
  3. My Wisonsin Dairy Farm visit
    By eepete in forum Off Topic
    Replies: 8
    Last Post: 09-28-2010, 06:18 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •