JD 3038e lift and curl
Results 1 to 2 of 2
Like Tree4Likes
  • 1 Post By rodified
  • 3 Post By dieselshadow

Thread: JD 3038e lift and curl

  1. Top | #1

    Join Date
    Mar 2019
    Last Online
    03-21-2019 @ 12:14 PM
    Posts
    1
    Thanks
    1
    Thanked 0 Times in 0 Posts

    JD 3038e lift and curl

    Greetings everyone,
    After searching extensively I can't seem to get a definitive answer to my question. I have spoken to several dealers and received several (opposite) answers. I even contacted JD only to find that they don't have a tech department and referred me back to the dealers. OK, so my simple question is; can u obtain both lift and curl at the same time on a 2015 JD 3038e with a 305 loader. Mine will only do whichever function receives input first. For example,, if I am lifting with the joystick pulled back and the I simultaneously push the stick to the left, the loader won't curl unless I push the stick forward and stop the lift. Can any tell me (definitively) if this is normal operation or do I have a problem?
    JD4044M likes this.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Today @ 09:12 AM
    Location
    Joelton TN
    Posts
    20,022
    Thanks
    1,069
    Thanked 4,346 Times in 2,615 Posts
    It can be done, but it takes practice. In open center hydraulics like your tractor has, fluid flows in the path of least resistance. So the sweet spot will change as your load and conditions do. You have to feather the controls in both lift and curl to do it. It’s not automatic, just practice on the operators parts. You’ll get the hang of it after a while.

    So no, your tractor doesn’t have any issues with this. It’s perfectly normal.

    BTW,

    And congrats on your new
    69project, JD4044M and ds_north_JD like this.
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

    Quote Originally Posted by Gizmo2 View Post
    Dieselshadow is my Hero.


  4. The Following User Says Thank You to dieselshadow For This Useful Post:

    rodified (03-21-2019)

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Similar Threads

  1. I seem to have broken my 3038e, snapped the lift lever clean off
    By BMCM in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 56
    Last Post: 08-26-2018, 03:52 PM
  2. What's the difference between 2016 3038e and 2017 3038e
    By cin769 in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 3
    Last Post: 01-03-2018, 09:44 AM
  3. JD 7775 curl cylinder
    By 56FordGuy in forum Construction Equipment
    Replies: 10
    Last Post: 11-24-2016, 07:44 PM
  4. 3038e 3pt lift height adjustment?
    By scott36854 in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 15
    Last Post: 06-05-2016, 12:21 PM
  5. 3038e three pt lift HELP! PLS
    By harley1rocker in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 8
    Last Post: 02-20-2015, 07:26 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •