3025e Power Beyond kit?

**tdhanses** · 05-09-2019, 12:18 PM

In looking at JD parts it looks like part number BLV11068 is the complete kit for the Power Beyond, or am I missing something? They call this part “Hyd Quick Connect Coupler”

It falls within the Attachments section of Power Beyond with an ST939567 which is not a valid part. In the parts breakout of the diagram #32 goes around everything and is the above part number.

**JeffW** · 05-09-2019, 11:38 PM

BLV11068 is the power beyond kit for 3025E, 3032E and 3038E to connect to a 370B backhoe

**Joncas** · 05-10-2019, 09:25 AM

I don't believe the factory power beyond is compatible with the rear 4th/5th valve if you have it. You can build your own Power Beyond for about $100 that does work with it.

Click image for larger version.

Name: IMG_20190430_224312_1557494690164.jpg
Views: 13
Size: 3.17 MB
ID: 685300

**tdhanses** · 05-10-2019, 01:58 PM

Originally Posted by Joncas

I don't believe the factory power beyond is compatible with the rear 4th/5th valve if you have it. You can build your own Power Beyond for about $100 that does work with it.

Will it interfere with a 3rd for a grapple? Can you elaborate on what you did for $100? Thanks!

**Joncas** · 05-10-2019, 02:44 PM

If you have the 2 extra scv on the back of the tractor - the left most port on the scv is the power beyond port that connects to a hard line that feeds the 3 point hydraulic lift. You can removed this line and replaced it with a custom hose assembly allowing you to loop in a power beyond implement.

This line won't affect the rear scv or use of the ports but the 3 point hitch shouldn't be used if the attachment using the power beyond loop can't take full relief pressures on the outlet side of the attachment. This isn't an issue with a backhoe because you can't use the 3 point. It would be easy enough to add a "to tank" drain connection but I didn't need it

I used a company called "discount hydraulic hose" for all parts and found them to be very reasonable.

To create what you see in the picture from rear scv to transmission you'll need:
#8 SAE/ORB Male x 1/2" JIC Female 90°
3/8" NPTF Male Pipe x 1/2" JIC Bulkhead Adapter
3/8" NPTF quick coupler set (female)
1/2" JIC Male x 3/8" NPTF Male Pipe 90°
56" long, 3/8" Hydraulic hose, 3" minimum radius, 2500psi+ working pressure with hose protective sleeve
Hose ends - 1/2" JIC Female to 1/2" ORFS Swivel 90° (3" offset)