x758 Bagger Options-Advice needed
Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 46
Like Tree7Likes

Thread: x758 Bagger Options-Advice needed

  1. Top | #1

    Join Date
    Apr 2017
    Last Online
    Today @ 06:26 AM
    Location
    MA
    Posts
    146
    Thanks
    0
    Thanked 3 Times in 3 Posts

    x758 Bagger Options-Advice needed

    Hi Guys,

    So I have a pretty small lot, under 1 acre, and I just need either a bagger or collection system to collect primarily leaves (we get a ton in New England), thatch, and grass.

    I have a rear PTO, and 3 point hitch (if that suggests anything else)

    I was going to go with the Deere brand, 7 bushel (2 bag) Bagger, namely because I think in my tight lot the 3 bagger would be too cumbersome to maneuver and the lot size just aint big enough...just my thoughts

    So options
    1. Deere Bagger
    2. MC542 Collection system which fits over the 17P cart I already have (can attach a vac hose to this to hand vac leaves)
    3. MC519 cart and collection system

    The ability to dump leaves with a lever from the comfort of your seat is a plus.... options 2 and 3 do that. 1 will do that but it needs another part.
    Not sure if option 2 and 3 takes away from maneuverability.....lots so

    Is everyone happy with the Deere Bagger compared to other makes??

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    sennister's Avatar
    Join Date
    Dec 2015
    Last Online
    Today @ 03:12 PM
    Location
    Twin Cities, MN
    Posts
    1,952
    Thanks
    23
    Thanked 215 Times in 177 Posts
    So I have a X585. Now this is back when the first X Series came out before the X7xx was a thing. Back then the X585 (gas, 4WD) and X595 (Diesel 4WD) is about equal to the X7xx machines now in that they are shaft drive implements and such. I think it was about mid 2000s when they came out with the X7xx and a new smaller X5xx.

    I will touch on these in the reverse order because it is in the order I would prefer if it were me and the order in which I have the most experience.

    Anyhow with that out of the way I have been running a very similar machine to yours in Minnesota since 2002. The collection system we have been using up until a little over a year ago was your Option 3. (MC519). We also have a 3pt hitch. Your system might be a little different but for us the 3pt arms have to come off and then the cart attaches to the back of the trailer. The cart is on casters and doesn't stick out that far. So the good is when you are going around trees you will never clip one with the cart. With 4wd and no 4 wheel steering it doesn't turn sharp enough to be an issue. If you had 4ws that may not be the case, I haven't driven one of those machines. For backing up it is a snap because it is hard mounted to the back of the tractor. The complaints I had with this system were that I had to get off the machine to dump. Well what do you do with your clippings/leaves? For us we are in more of a rural area with 2.5 acres. I have a large compost pile for them and make dirt out of them. So there is no way I would want to mess around with putting the leaves in a 2 or 3 bag hopper. More on this later. If there is anything else to complain about it is the PowerFlow head. It is nice not having yet another engine to maintain but they are not cheap and I have been through a couple of them. The problem is the housing is plastic on them and all the dirt and leaves going through will eventually wear out the housing. You can replace the housing but I want to say it is $200-250 and kind of a pain to do. Just be aware it is a bit of a consumable part. With me doing 2.5 acres and hitting some of the neighbor yards helping out I would say I go through a housing every 5-7 years. Not that often but just keep it in mind.

    As for your option 2. The MC542 option, while I haven't used that exact one personally, growing up my father had a similar system (not John Deere Branded) on his JD 317. So I have years running the trailers with a pony engine. It is true that they have power to suck. You can disconnect it and pick up piles around shrubs but I use a backpack blower to push everything out in the yard anyhow. I find that quicker. It is another engine to maintain. I would check and see what the impeller and impeller housing is made out of. It might be better if steel but if plastic like the PowerFlow, you are not gaining much. It looks like the discharge chute going out the impeller and into the cart is pretty small. If you are set on this route, I would just say there are lots of aftermarket options. Go with something that has a 10"-12" hoses. They are less likely to clog. These are also a bit of a pain around trees if you have to back up to maneuver around. You still have to get off to dump but have more capacity so less trips to dump. If you are not doing a compost pile, like the option 3 above, it would be a pain to transfer from this to bags to haul away. Personally if I had to stick with John Deere I would go with Option 3. A draw back is as these carts get full they can get heavy. More so if the leaves are wet or you have a lot of longer grass which is wet. This is an issue when trying to dump the load. Again I would look at 3rd party ones over the John Deere. The biggest advantage is that there is little to wear if the impeller housing and impeller is steel. The engines may die but you can repower them for about $120 at Harbor Freight. My dad replaces the engines on his when they start to smoke. It isn't worth trying to fix them. A disadvantage is you have a diesel tractor so you are going to have to deal with gas for the pony engine and diesel on the tractor. Maybe it isn't a big deal but worth noting.

    Finally Option 1. The bagger. Really the only reason I would go with one is if I had to bag the clippings/leaves to haul them somewhere or for pickup. There is no other good reason to go this route if you are composting like I am. You still have the same PowerFlow head issue with option 3. Also there is more fabric to the system and that will wear and tear so more maintenance. This is the reason I don't have a 1 series tractor. I was considering replacing my X585 a while back and I was going to buy a 1 series with FEL, blade, snow blower, drive over 60" deck and a collection system. The 3 position bagger which was the only option at the time killed the deal. There were some 3rd party collection systems but I wanted John Deere to roll it into the 0% financing. I couldn't live with the 3 bag collection system with the way I used it. This would have been a huge step backwards.

    Once I gave up on the 1 series, I considered a new X Series but there isn't a FEL option anymore. So I thought of getting a new one and keeping the X585 for a dedicated FEL. Then I would run the option 3 on the new machine but the more I thought about it, I really didn't gain much. However I was looking at a X739 which is the gas, 4wd and 4ws so it would make less passes around trees. That is when I saw and ended up buying the Z950R with Dump From Seat MCS. Then I gained the performance of a commercial Zero Turn and while I lost capacity, I still ended up shaving quite a bit of time off picking up leaves just because the ground speed is so much faster making trips to dump and not having to get off the machine when dumping. I only mention this because I was in the dealer about a month ago and saw that they now have a dump from seat hopper which is a little bigger than the one on my Z950R that fits the 1 Series. I want to say it mounts to the 3pt hitch so maybe it will fit your machine. I don't know as I didn't ask if that fit the X Series. They just had it sitting on the showroom floor because they didn't have any 1 Series machines to mount it to. They had sold them all and were waiting on the shipment to come in. You kind of mentioned dump from seat and none of the options that you mentioned will give you that. I will agree that it is nice.
    jd2854020 and TJR345 like this.


    JD Z950R 60" Deck with DFS Collection System

    JD X585, 54C deck,
    CTC Model X4750 F.E.L - Modified Imp Pressure Relief from 900 to 1175PSI, Power Flow and MC519 cart, 54-inch Quick-Hitch Front Blade, 47-inch Quick-Hitch Snow Blower, 3-pt hitch, HF Quick Hitch, Heavy Hitch, 60" box blade/rear blade, Dethacher, Sprayer cart

  4. Top | #3
    TJR345's Avatar
    Join Date
    Jan 2016
    Last Online
    Today @ 07:51 PM
    Location
    Area 51 in Cambria,NY
    Posts
    3,728
    Thanks
    415
    Thanked 476 Times in 367 Posts
    For your lot I would look at the 7 bushel dump from seat.
    Tom

    2019 X590 with power mulch control and PF bagger
    30" mechanical tiller
    02 X595 with 62" deck,front thatcher and powerflow PTO kit
    3pt hitch with Heavy Hitch 45 JD loader
    12 JD suitcase weights
    JD/Brinly 3pt plow
    Frontier SS1036 3pt pto spreader
    (2) JS63C walk behind mowers
    TS 105 JD weed wacker
    tow behind 15 gal. sprayer
    Turftime 60" lawn roller
    Turftime 54" 3pt core aerator

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    TJR345's Avatar
    Join Date
    Jan 2016
    Last Online
    Today @ 07:51 PM
    Location
    Area 51 in Cambria,NY
    Posts
    3,728
    Thanks
    415
    Thanked 476 Times in 367 Posts
    Quote Originally Posted by sennister View Post
    So I have a X585. Now this is back when the first X Series came out before the X7xx was a thing. Back then the X585 (gas, 4WD) and X595 (Diesel 4WD) is about equal to the X7xx machines now in that they are shaft drive implements and such. I think it was about mid 2000s when they came out with the X7xx and a new smaller X5xx.

    I will touch on these in the reverse order because it is in the order I would prefer if it were me and the order in which I have the most experience.

    Anyhow with that out of the way I have been running a very similar machine to yours in Minnesota since 2002. The collection system we have been using up until a little over a year ago was your Option 3. (MC519). We also have a 3pt hitch. Your system might be a little different but for us the 3pt arms have to come off and then the cart attaches to the back of the trailer. The cart is on casters and doesn't stick out that far. So the good is when you are going around trees you will never clip one with the cart. With 4wd and no 4 wheel steering it doesn't turn sharp enough to be an issue. If you had 4ws that may not be the case, I haven't driven one of those machines. For backing up it is a snap because it is hard mounted to the back of the tractor. The complaints I had with this system were that I had to get off the machine to dump. Well what do you do with your clippings/leaves? For us we are in more of a rural area with 2.5 acres. I have a large compost pile for them and make dirt out of them. So there is no way I would want to mess around with putting the leaves in a 2 or 3 bag hopper. More on this later. If there is anything else to complain about it is the PowerFlow head. It is nice not having yet another engine to maintain but they are not cheap and I have been through a couple of them. The problem is the housing is plastic on them and all the dirt and leaves going through will eventually wear out the housing. You can replace the housing but I want to say it is $200-250 and kind of a pain to do. Just be aware it is a bit of a consumable part. With me doing 2.5 acres and hitting some of the neighbor yards helping out I would say I go through a housing every 5-7 years. Not that often but just keep it in mind.

    As for your option 2. The MC542 option, while I haven't used that exact one personally, growing up my father had a similar system (not John Deere Branded) on his JD 317. So I have years running the trailers with a pony engine. It is true that they have power to suck. You can disconnect it and pick up piles around shrubs but I use a backpack blower to push everything out in the yard anyhow. I find that quicker. It is another engine to maintain. I would check and see what the impeller and impeller housing is made out of. It might be better if steel but if plastic like the PowerFlow, you are not gaining much. It looks like the discharge chute going out the impeller and into the cart is pretty small. If you are set on this route, I would just say there are lots of aftermarket options. Go with something that has a 10"-12" hoses. They are less likely to clog. These are also a bit of a pain around trees if you have to back up to maneuver around. You still have to get off to dump but have more capacity so less trips to dump. If you are not doing a compost pile, like the option 3 above, it would be a pain to transfer from this to bags to haul away. Personally if I had to stick with John Deere I would go with Option 3. A draw back is as these carts get full they can get heavy. More so if the leaves are wet or you have a lot of longer grass which is wet. This is an issue when trying to dump the load. Again I would look at 3rd party ones over the John Deere. The biggest advantage is that there is little to wear if the impeller housing and impeller is steel. The engines may die but you can repower them for about $120 at Harbor Freight. My dad replaces the engines on his when they start to smoke. It isn't worth trying to fix them. A disadvantage is you have a diesel tractor so you are going to have to deal with gas for the pony engine and diesel on the tractor. Maybe it isn't a big deal but worth noting.

    Finally Option 1. The bagger. Really the only reason I would go with one is if I had to bag the clippings/leaves to haul them somewhere or for pickup. There is no other good reason to go this route if you are composting like I am. You still have the same PowerFlow head issue with option 3. Also there is more fabric to the system and that will wear and tear so more maintenance. This is the reason I don't have a 1 series tractor. I was considering replacing my X585 a while back and I was going to buy a 1 series with FEL, blade, snow blower, drive over 60" deck and a collection system. The 3 position bagger which was the only option at the time killed the deal. There were some 3rd party collection systems but I wanted John Deere to roll it into the 0% financing. I couldn't live with the 3 bag collection system with the way I used it. This would have been a huge step backwards.

    Once I gave up on the 1 series, I considered a new X Series but there isn't a FEL option anymore. So I thought of getting a new one and keeping the X585 for a dedicated FEL. Then I would run the option 3 on the new machine but the more I thought about it, I really didn't gain much. However I was looking at a X739 which is the gas, 4wd and 4ws so it would make less passes around trees. That is when I saw and ended up buying the Z950R with Dump From Seat MCS. Then I gained the performance of a commercial Zero Turn and while I lost capacity, I still ended up shaving quite a bit of time off picking up leaves just because the ground speed is so much faster making trips to dump and not having to get off the machine when dumping. I only mention this because I was in the dealer about a month ago and saw that they now have a dump from seat hopper which is a little bigger than the one on my Z950R that fits the 1 Series. I want to say it mounts to the 3pt hitch so maybe it will fit your machine. I don't know as I didn't ask if that fit the X Series. They just had it sitting on the showroom floor because they didn't have any 1 Series machines to mount it to. They had sold them all and were waiting on the shipment to come in. You kind of mentioned dump from seat and none of the options that you mentioned will give you that. I will agree that it is nice.
    They have this for the 1 series now. https://www.youtube.com/watch?v=nyDErO84vDg
    Tom

    2019 X590 with power mulch control and PF bagger
    30" mechanical tiller
    02 X595 with 62" deck,front thatcher and powerflow PTO kit
    3pt hitch with Heavy Hitch 45 JD loader
    12 JD suitcase weights
    JD/Brinly 3pt plow
    Frontier SS1036 3pt pto spreader
    (2) JS63C walk behind mowers
    TS 105 JD weed wacker
    tow behind 15 gal. sprayer
    Turftime 60" lawn roller
    Turftime 54" 3pt core aerator

  7. Top | #5

    Join Date
    Sep 2015
    Last Online
    03-02-2019 @ 06:20 PM
    Location
    Lehigh Valley PA
    Posts
    3,228
    Thanks
    1
    Thanked 201 Times in 195 Posts
    Quote Originally Posted by Eire1916 View Post
    Hi Guys,

    So I have a pretty small lot, under 1 acre, and I just need either a bagger or collection system to collect primarily leaves (we get a ton in New England), thatch, and grass.

    I have a rear PTO, and 3 point hitch (if that suggests anything else)

    I was going to go with the Deere brand, 7 bushel (2 bag) Bagger, namely because I think in my tight lot the 3 bagger would be too cumbersome to maneuver and the lot size just aint big enough...just my thoughts

    So options
    1. Deere Bagger
    2. MC542 Collection system which fits over the 17P cart I already have (can attach a vac hose to this to hand vac leaves)
    3. MC519 cart and collection system

    The ability to dump leaves with a lever from the comfort of your seat is a plus.... options 2 and 3 do that. 1 will do that but it needs another part.
    Not sure if option 2 and 3 takes away from maneuverability.....lots so

    Is everyone happy with the Deere Bagger compared to other makes??
    I'd recommend the 3 bag PF MCS. Then replace the bags with a dump from the seat kit. The 3 bag doesn't stick out enough to cause you trouble. It pretty much is as wide as the back of the tractor. I think the 2 bag would fill up to quickly in the fall. The downside is that the PF unit sticks out from the side of the deck. However any type of system would have some kind of collector attached to the deck.

    A PTO powered unit that attached to the 3 point hitch would be the cat's pajamas. However not to many options are available. I'm sure it would also be pricey.

    I have been making do with a 42" JD tow behind lawn sweeper for years now. It's not perfect but it beats raking. I usually start by cutting the grass and chopping up any leaf cover. Then drag the sweeper around to pick it up. So it takes longer than a MCS that does everything in one shot. The sweeper does have a rope to dump the basket without getting off the tractor. A sweeper would also be the cheapest option. Mine was around $450.
    2014 X540 with HDAP tires, 54" deck, brush guard, arm rests and cargo bag.
    JD 48" plow with angle from seat kit & heavy duty skid shoes.
    4 suitcase weights and chains.
    JD tow behind spreader.
    JD 42" lawn sweeper.
    JD 10P cart.
    JD JS61 RWD walk behind mower.
    Stihl KM110 power head with pole saw, shaft extension, power scythe, curved shaft edger, 2 straight shaft cutters (string & blade).
    Stihl MS180-CBE 16" saw.
    Stihl SH86C hand held blower vac.

  8. Top | #6
    sennister's Avatar
    Join Date
    Dec 2015
    Last Online
    Today @ 03:12 PM
    Location
    Twin Cities, MN
    Posts
    1,952
    Thanks
    23
    Thanked 215 Times in 177 Posts
    Quote Originally Posted by TJR345 View Post
    They have this for the 1 series now. https://www.youtube.com/watch?v=nyDErO84vDg
    Yeah, that is the unit I was talking about at the tail end when I was saying this.

    I only mention this because I was in the dealer about a month ago and saw that they now have a dump from seat hopper which is a little bigger than the one on my Z950R that fits the 1 Series. I want to say it mounts to the 3pt hitch so maybe it will fit your machine. I don't know as I didn't ask if that fit the X Series. They just had it sitting on the showroom floor because they didn't have any 1 Series machines to mount it to. They had sold them all and were waiting on the shipment to come in. You kind of mentioned dump from seat and none of the options that you mentioned will give you that. I will agree that it is nice.
    I don't know if there is a way to adapt that to fit a X7xx. From what I recalled in looking at it sitting on the showroom floor it mounts via the 3pt hitch which he has. So it will likely physically fit. If I recall it uses a electric linear actuator for the dump function so a switch would have to be rigged up somehow. It uses the standard PowerFlow Head that would be used with the MC519 and 2/3 bag bagger. So in theory it would work. Might need some front suitcase weights. I don't know how far is sticks out to know if there are issues with tree interference but that will really depend on the layout of your yard. I have a few trees where I have to snake around them where they are clustered together.

    I think it would have been a much harder decision if this DFS Hopper was available 2 years ago when I started looking at options. The first time I saw it was about a month ago when I was at the dealer and it was sitting next to the 2038R that I was looking at. It would have been nice to get a bit more lifting capacity in a FEL but I don't have an issue now really. I mainly use it for managing/turning the compost piles. I will say that I do like the route I went. It is nice to leave the FEL on a machine all summer long. There are times where I just needed to move something and I was always debating if it was worth taking the 5-10min to put it on and then take it back off. Just this weekend I was moving a generator around and would have likely done it by hand had I not had a dedicated FEL Machine. I don't like how it raises the CG of the machine and it sticks out too far to easily get around the trees when mowing. Now it is not an issue. FEL is on all spring/summer/fall. Mowing is done with the ZTrak which is faster than a X or 1 Series freeing up more time. Then in the winter the blade goes on for plowing.


    JD Z950R 60" Deck with DFS Collection System

    JD X585, 54C deck,
    CTC Model X4750 F.E.L - Modified Imp Pressure Relief from 900 to 1175PSI, Power Flow and MC519 cart, 54-inch Quick-Hitch Front Blade, 47-inch Quick-Hitch Snow Blower, 3-pt hitch, HF Quick Hitch, Heavy Hitch, 60" box blade/rear blade, Dethacher, Sprayer cart

  9. Top | #7
    sennister's Avatar
    Join Date
    Dec 2015
    Last Online
    Today @ 03:12 PM
    Location
    Twin Cities, MN
    Posts
    1,952
    Thanks
    23
    Thanked 215 Times in 177 Posts
    Quote Originally Posted by H-D dealer dude View Post
    I'd recommend the 3 bag PF MCS. Then replace the bags with a dump from the seat kit. The 3 bag doesn't stick out enough to cause you trouble. It pretty much is as wide as the back of the tractor. I think the 2 bag would fill up to quickly in the fall. The downside is that the PF unit sticks out from the side of the deck. However any type of system would have some kind of collector attached to the deck.

    A PTO powered unit that attached to the 3 point hitch would be the cat's pajamas. However not to many options are available. I'm sure it would also be pricey.

    I have been making do with a 42" JD tow behind lawn sweeper for years now. It's not perfect but it beats raking. I usually start by cutting the grass and chopping up any leaf cover. Then drag the sweeper around to pick it up. So it takes longer than a MCS that does everything in one shot. The sweeper does have a rope to dump the basket without getting off the tractor. A sweeper would also be the cheapest option. Mine was around $450.
    Those PTO powered machines are a nice option. I don't know that there is one in the John Deere catalog though. If someone I guess if I were buying a new machine with 0% financing it is a reason to go all John Deere for these attachments. Normally if all under the same invoice, it all qualifies. If this is a later on purchase, then in all honesty, one shouldn't limit themselves to just John Deere attachments as there are other options.


    The biggest thing I would look for is something with big hoses. When you have those ribbed hoses going to the collection system, they catch sticks really easy if they are too small. Once that happens they plug up. Unless you like picking up ever tiny stick, go with a hose that is 10"+. That is my biggest concern with the photo of the MC542. My maple and ash trees drop too many sticks to pick them all up and the smooth square tube on the MC519 typically wasn't an issue. The 12" ribbed tube hasn't been an issue on the Z950R either. Though it is a pretty straight shot.

    I would still say that we don't have quite enough information as to what would be best for the OP. Depending on what he has to do with the clippings and leaves is going to be the biggest factor on if a cart or DFS style system is better or a bagger.


    JD Z950R 60" Deck with DFS Collection System

    JD X585, 54C deck,
    CTC Model X4750 F.E.L - Modified Imp Pressure Relief from 900 to 1175PSI, Power Flow and MC519 cart, 54-inch Quick-Hitch Front Blade, 47-inch Quick-Hitch Snow Blower, 3-pt hitch, HF Quick Hitch, Heavy Hitch, 60" box blade/rear blade, Dethacher, Sprayer cart

  10. Top | #8

    Join Date
    Apr 2016
    Last Online
    Today @ 03:52 PM
    Location
    Minnesota
    Posts
    1,230
    Thanks
    20
    Thanked 83 Times in 79 Posts
    The MC519 fills up incredibly fast when mowing with my x758, either grass clippings or leaves. I can get maybe 250-350 linear yards before it is full. If you get a 7 bu unit you'll be dumping every minute or two. And that takes up a lot of time driving to your leaf pile, dumping, and driving back to the lawn.

    Last year was my first year with my setup, though I've used a MC519 behind my dad's 345 in the past. While bagging leaves off my yard once or twice I dumped the thing somewhere between 25-30 times. From the seat, because that's how I'm used to doing it. That's not good for your back, let me tell you... So I just added a hydraulic dump to my MC519. Looking forward to things being a LOT easier this season!

    Rob
    2016 x758 w/60" HC mower, 54" snowblower, MC519 bagger
    2010 2520 w/61" H130 loader, TA 42" forks, KK 60" Pro tiller, iMatch quick hitch, KK middle buster
    1996 345 - Traded
    Other toys: Stihl BR600 backpack blower; McCulloch chainsaws: 10-10S, 700, 805, 10-10; JD trimmer

    2520:__________________________x758:__________________________Faithful 345:___________________

  11. Top | #9

    Join Date
    Sep 2015
    Last Online
    03-02-2019 @ 06:20 PM
    Location
    Lehigh Valley PA
    Posts
    3,228
    Thanks
    1
    Thanked 201 Times in 195 Posts
    For maneuvering in tight spaces nothing is smaller than the bagger. Everything else is going to occupy some real estate out back.
    However I think that the 2 bag would just be to small. Just my option from shopping them for my X540.
    My daughter's place is about an acre with a fair amount of trees. I think the 3 bag would handle it okay. Just have to keep after it. Don't be like a former coworker. He waited till everything fell then wanted to borrow my sweeper to clean it up. Plus he was trying to tow it with a POS mower. After 10-15' the sweeper was full and stopped the mower in its tracks. He also had a 2 bag bagger. Couldn't even make one loop before it was full. Also a PITA to empty. Even dump from the seat would have been a big improvement.
    2014 X540 with HDAP tires, 54" deck, brush guard, arm rests and cargo bag.
    JD 48" plow with angle from seat kit & heavy duty skid shoes.
    4 suitcase weights and chains.
    JD tow behind spreader.
    JD 42" lawn sweeper.
    JD 10P cart.
    JD JS61 RWD walk behind mower.
    Stihl KM110 power head with pole saw, shaft extension, power scythe, curved shaft edger, 2 straight shaft cutters (string & blade).
    Stihl MS180-CBE 16" saw.
    Stihl SH86C hand held blower vac.

  12. Top | #10
    sennister's Avatar
    Join Date
    Dec 2015
    Last Online
    Today @ 03:12 PM
    Location
    Twin Cities, MN
    Posts
    1,952
    Thanks
    23
    Thanked 215 Times in 177 Posts
    Quote Originally Posted by H-D dealer dude View Post
    For maneuvering in tight spaces nothing is smaller than the bagger. Everything else is going to occupy some real estate out back.
    However I think that the 2 bag would just be to small. Just my option from shopping them for my X540.
    My daughter's place is about an acre with a fair amount of trees. I think the 3 bag would handle it okay. Just have to keep after it. Don't be like a former coworker. He waited till everything fell then wanted to borrow my sweeper to clean it up. Plus he was trying to tow it with a POS mower. After 10-15' the sweeper was full and stopped the mower in its tracks. He also had a 2 bag bagger. Couldn't even make one loop before it was full. Also a PITA to empty. Even dump from the seat would have been a big improvement.
    I agree but if you have 2 wheel steering, assuming the turning radius is the same on a X758 as my X585, I couldn't clip a tree with the MC519 if I tried. Now I have to really watch that though as with the Zero turn I have clipped more than a couple trees with the hopper.

    I also agree that there is no way I would do a 2 bag system. I could do a 3 if I was taking clippings somewhere off site and it was a smaller yard. No way I am messing with that and my yard with my trees that drop a ton of leaves. It is that fact that the baggers are a PITA to dump as you mentioned. As far as timing that is a good point. There is a certain amount of trade off. With my X585 I would normally wait until there are more leaves down and they are dry. This way they get ground up into powder and you can haul more. The trade off being that may mean more leaves on the ground so it is a wash. The ZTrak with high lift blades does a better job of shredding even wet leaves so I get good compaction in the hopper anytime. I tend to pick up more often if my schedule permits. The other good/bad thing out of my control is that most of our leaves are from a mix of Ash and Maple Trees. The Ash trees shed their leaves in late Sept to early Oct. The Maples hold out for late Oct into November. Meaning if we get dumped on early the Maple leaves have been known to sit until spring. I really wish they would all come down at once so I can just pick everything up, and put it away for the winter.
    H-D dealer dude likes this.


    JD Z950R 60" Deck with DFS Collection System

    JD X585, 54C deck,
    CTC Model X4750 F.E.L - Modified Imp Pressure Relief from 900 to 1175PSI, Power Flow and MC519 cart, 54-inch Quick-Hitch Front Blade, 47-inch Quick-Hitch Snow Blower, 3-pt hitch, HF Quick Hitch, Heavy Hitch, 60" box blade/rear blade, Dethacher, Sprayer cart

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 5 1 2 3 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •