John Deere 425 fuel shutoff
Results 1 to 3 of 3
Like Tree1Likes
  • 1 Post By channellxbob

Thread: John Deere 425 fuel shutoff

  1. Top | #1

    Join Date
    May 2013
    Last Online
    08-26-2019 @ 04:12 PM
    Location
    Minnesota
    Posts
    48
    Thanks
    48
    Thanked 0 Times in 0 Posts

    John Deere 425 fuel shutoff

    Bought a used 425 that has carburetor problems. Removed the carburetor and found the wire to the fuel shutoff was cut at the fuel shutoff and the plunger inside was cut off as well. I cannot see where the wire used to be plugged in to the harness. I suspect its on the left side but I am not sure. Looks like the wire on the fuel shutoff is yellow. I plan on rebuilding the carburetor and would like to replace the fuel shutoff. My 425 is a 1998 with 500 hours. If someone has a picture that would be great. Thanks

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Herminator's Avatar
    Join Date
    Mar 2017
    Last Online
    Today @ 08:49 PM
    Location
    Northern Illinois
    Posts
    3,934
    Thanks
    1,736
    Thanked 843 Times in 632 Posts
    Hopefully someone who knows for sure or has a photo will respond. I have an idea below but mostly replied to keep your post active.
    I am not for certainly but based on other one I have seen. Lower left and the yellow wire with have a bullet connector that plugs into a double bullet female that has another wire in the 2nd one. When you buy the new one the wire will be the right length for where it goes so that will narrow it down to about a foot.
    Last edited by Herminator; 10-21-2018 at 10:43 PM.
    Welcome to Intermission.

    2017 2038R, 400, 3020 & HPX and thingies to hook to the them.
    112 - Sold in July 2017 but took me until November to admit I just cast it out into this cruel world.
    #compactfarmer

  4. The Following User Says Thank You to Herminator For This Useful Post:

    jackson63(10-22-2018)

  5. Top | #3

    Join Date
    Aug 2017
    Last Online
    10-29-2018 @ 06:01 PM
    Location
    US
    Posts
    24
    Thanks
    0
    Thanked 3 Times in 3 Posts
    Yellow wire goes to the ignition delay module. Yellow to yellow on module. If you need more help send me an email at
    channellxbob. AT Gmail DOT Com and I'll send screen shots of tech manual.
    Herminator likes this.

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts