Snow plow help for my g100
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
Like Tree2Likes

Thread: Snow plow help for my g100

  1. Top | #1

    Join Date
    Nov 2018
    Last Online
    11-20-2018 @ 02:20 PM
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hi I need some help finding out if this JD plow will work for my g100. I've been searching the net for info but I'm not having any luck. It seems to be a really good deal but The guy who is selling it is not sure what model jd the plow is for either. I don't mind doing a little fabricating I just want to be sure it's possible and fairly simple to do. Please forgive me if I posted this wrong, im new here and new to forums in general. There should be pictures attached below. Any info would be greatly appreciated. Thanks
    Attached Thumbnails Attached Thumbnails 20181112_192248_1542126981942.jpg   20181113_124347_1542131722567.jpg  
    Last edited by Anthony91; 11-13-2018 at 11:55 AM.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Jun 2014
    Last Online
    Yesterday @ 09:32 PM
    Location
    Berlin, MA
    Posts
    4,583
    Thanks
    94
    Thanked 863 Times in 658 Posts
    Based on the serial number, that's a 1994 48" blade made to fit the 240, 245, 260, 265, 285, 325, 345 and 355D garden tractors.

    https://partscatalog.deere.com/jdrc-...0&locale=en-US

    The correct plow for your G100 is a 46" and the serial number will start with M046SCX.
    Last edited by JimR; 11-13-2018 at 11:57 AM.
    BigJim55 likes this.
    D160 Mower/Bagger.
    2014 2032R tractor/H130 FEL w/Bolt-On Hooks/54" Snow Plow/iMatch Quick-Hitch/County Line 5' Scraper blade/County Line Carry-All/Artillian 42" Forks & QH Adapter/JD Ballast Box/Frontier SB1164 3PH Blower/Leinbach PHD/Wallenstien BX42 Chipper

  4. The Following User Says Thank You to JimR For This Useful Post:

    Kennyd (11-13-2018)

  5. Top | #3

    Join Date
    Nov 2018
    Last Online
    11-20-2018 @ 02:20 PM
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thank you for the info. So far, this is the only plow I can find in my area that looks like it might work with a little fabricating. Im just curious if anyone here has done something similar to this. I don't want to get in over my head.

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4
    Sergeant's Avatar
    Join Date
    Aug 2011
    Last Online
    09-05-2019 @ 02:24 PM
    Location
    Kane County,IL
    Posts
    1,132
    Thanks
    1
    Thanked 210 Times in 169 Posts
    Keep In Mind this is the 46inch Blade You Need for the G100. Blade Model Number BM19921 It attaches entirely different from the blade you posted above. Totally different Sub Frame and it is not Like the 46inch Front Blade for the 240 thru 320 or GT242 thru GT275.


    Look for a Blade That was Used On the Sabre & Scott's By JD Yard & Garden tractors Made through the Mid 1990's till 2002 Basically they will look Just Like your G100 But in a different Color & Hood design

    SABRE Models
    Yard Tractors
    1842GV
    1842HV
    1848GV
    1848HV
    1948GV
    1948HV

    Garden Tractors
    2048HV
    2148HV
    2254HV
    2354HV
    2554HV

    Scotts
    Yard Tractors
    S2048
    S2348
    Garden tractors
    S2554
    GT2554
    Attached Thumbnails Attached Thumbnails MP19654________UN29SEP98.jpg  
    Attached Files Attached Files
    Last edited by Sergeant; 11-13-2018 at 06:23 PM.
    John Deere Models: 2025RTLB(Gen 2),X748,GX335,140H3,112SF,110RF,Sabre 1542,TX Gator
    Cub Cadet Models:0riginal,70,106,XT3GSX & Experimental Non Production Rear engine rider
    Ingersoll Model:3016PS
    Simplicity Models:Wonder Boy
    White Model: GT2055

    MSGT 11 & 18 Series Retired

  8. Top | #5
    SulleyBear's Avatar
    Join Date
    Oct 2014
    Last Online
    Yesterday @ 01:33 PM
    Location
    Beautiful beaches, moderated summer heat and lake effect snows. Right where I want to be.
    Posts
    6,914
    Thanks
    1,394
    Thanked 2,475 Times in 1,386 Posts

    Post

    Since the actual blade designed for your tractor fit a few different models and even brands, I would suggest searching through those small companies and individuals who part out mowers and L&G tractors. I have been in several of the shops of these outfits over the years and some have impressive amounts of inventory. Trying to find the individual with the tractor or who had the tractor at one time and has the blade left over is akin to finding the needle in the haystack.

    To begin with, familiarize yourself with the search methods for the actual model number like JimR and Sergeant both used to provide their responses. It will save you a ton of time with "close but no cigars". That way when you do find something, you can easily check with your phone or computer to see what the item fits.

    Sometimes a close fit that isn't quite right can end up being tougher to modify when working with the constraints of the item. There are supposedly "Universal fit plows" on the market place which can be made to work, depending upon your fabrication and creativity skills.

    I think if you contact the sellers of used parts listed which fit your machine, from either Ebay or Craigslist or even a Google search for Used parts for your specific tractor, you are likely to reach some of those people who part out machines for a living and have contacts with others for such things. I would search specifically for the correct plow first, not by trying to find one listed for sale, but by reaching out to these individuals who part out machines.

    Some of these places I have visited were 10,000 sq foot facilities with very organized bar coded inventories, while others were hopelessly disorganized messes, but in each case, the people in charge seemed to know where everything could be found and what they had.

    Then it depends upon how far you want to drive, or the cost to have items shipped. But regardless of what you find, make sure you check the parts schematics like Sergeant posted to make sure you are getting the brackets and mounts you need. Otherwise, you could end up buying pieces new (if still available) and that can make a good deal get expensive quickly.

    1025R with Mauser Cab
    (10/2017)/ 120R FEL / RC2048 Mower / All of Ken's Bolt on Products / 60" HD Front Broom / 3 pt 45 Gallon Boom less Sprayer / CA2068 Core Aerator / I-Match / 54" Snow Plow w/ angling Quick Attach / Frontier 3 Pt Sprayer / Pallet Forks / 8 -42# Weights

    John Deere 455 (New in 9/1996) / MC519 Cart /60" MMM /47" Snow Thrower / 7'3" snow plow / Quick Hitch /
    4 -42# Weights / JD#10 Cart

    ExMark Lazer Z w/60" Deck , Billy Goat Blower , Full Stable of Echo Products





  9. Top | #6

    Join Date
    Nov 2018
    Last Online
    11-20-2018 @ 02:20 PM
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Ok thanks again everyone. I guess modifying it will be much more complicated than I had in mind. It's Not the news I wanted to hear, but you guys probably just saved me a big headache.

  10. Top | #7
    Sergeant's Avatar
    Join Date
    Aug 2011
    Last Online
    09-05-2019 @ 02:24 PM
    Location
    Kane County,IL
    Posts
    1,132
    Thanks
    1
    Thanked 210 Times in 169 Posts

    Aftermarket Dozer or Snow Blade for G100

    Bercomac Make two Blades that will fit Your Tractor Th either Have a snow Blade Or a Utility Blade Both are available with electric Lift. The snow Blade is also available with Manual lift Then there is agri-Fab I am not to Keen On the Agri-Fab Blade The front Mounting Brackets are a Little weak Had a friend with a Cub Cadet XT2 tear it up with one season of snow removal

    Since Bercomac website Must Be down for Maintenance Here Is a Bercomac Dealer Tractor Blade - Tractor Front Blade

    Agri-Fab Products > 48" Snow Blade

    BTW here are two Picture of the Deere OEM 46inch Blade for the G100
    Attached Thumbnails Attached Thumbnails images.jpg   IMG-20121019-00115.jpg   IMG-20121019-00116.jpg  
    Last edited by Sergeant; 11-13-2018 at 11:25 PM.
    John Deere Models: 2025RTLB(Gen 2),X748,GX335,140H3,112SF,110RF,Sabre 1542,TX Gator
    Cub Cadet Models:0riginal,70,106,XT3GSX & Experimental Non Production Rear engine rider
    Ingersoll Model:3016PS
    Simplicity Models:Wonder Boy
    White Model: GT2055

    MSGT 11 & 18 Series Retired

  11. Top | #8

    Join Date
    Nov 2018
    Last Online
    11-20-2018 @ 02:20 PM
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Yes I was looking at the agri-fab. They say it will fit the g100, the price is tempting, but i am concerned about its quality of construction. I just bought my first house last month, so my budget is on the low side. Prior to this I didn't need a plow. Now I live in the middle of the woods, and have a long driveway. The snow is already starting to fall so I was hoping to make it work to get me by for now. Plus the price he's asking for it is hard to pass up. But im going to keep looking around. Worst case is ill pickup an agri-fab to get me threw this season.

  12. Top | #9

    Join Date
    Sep 2015
    Last Online
    03-02-2019 @ 06:20 PM
    Location
    Lehigh Valley PA
    Posts
    3,228
    Thanks
    1
    Thanked 201 Times in 195 Posts
    This is the plow you need for your tractor. From what I remember the price wasn't that bad new. You will definitely need chains and a rear weight bracket that holds 2 suitcase weights.

    I used it for a rural driveway at first. Then did a 70 unit trailer park with it for over 5 years.

    The pictures are from when I was selling it. That's why the deck is on at the same time. You definitely want to remove the deck before plowing.
    Attached Thumbnails Attached Thumbnails IMG_1037.JPG   IMG_1032.JPG   IMG_1078.JPG   IMG_1031.JPG  
    fdmars likes this.
    2014 X540 with HDAP tires, 54" deck, brush guard, arm rests and cargo bag.
    JD 48" plow with angle from seat kit & heavy duty skid shoes.
    4 suitcase weights and chains.
    JD tow behind spreader.
    JD 42" lawn sweeper.
    JD 10P cart.
    JD JS61 RWD walk behind mower.
    Stihl KM110 power head with pole saw, shaft extension, power scythe, curved shaft edger, 2 straight shaft cutters (string & blade).
    Stihl MS180-CBE 16" saw.
    Stihl SH86C hand held blower vac.

  13. Top | #10

    Join Date
    Nov 2018
    Last Online
    11-20-2018 @ 02:20 PM
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thanks for the help everyone. I actually picked up a plow over the weekend, made a couple quick brackets and bolted it on.
    Works perfectly so far. I can have it on or off in minutes. It's not how I wanted to do it, but it will do the job until the budget allows for a new machine. Chains and weights are on the way, although I was pretty impressed with its performance without them. Overall, im happy with it. I can post pictures if anyone is interested. It's not pretty but she'll move some snow and that's what matters to me.

  14. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •